PE not working properly (SOLVED)

Post by **Penguin** » Tue Jan 16, 2007 5:37 am

Ignore the common.lvl message, that always comes up, just click okay and it will open

Post by **Qdin** » Tue Jan 16, 2007 8:25 am

didn't he still have a problem? O.o Especially considering he apparently haven't had that 'error' before...

So either he has become like the rest of us or sometihng screwed up

So if you ignore the message, does it then work, IPodZanyMan?

Ipodzanyman · Post by **Ipodzanyman** » Tue Jan 16, 2007 10:36 am

No, I installed it into the default area, it just doesn't want to work >:( , I press okay still Penguin, it just crashes and has the usual "do you want to report it to Microsoft?" Thanks anyways Qdin

Ipodzanyman · Post by **Ipodzanyman** » Thu Jan 18, 2007 9:34 pm

What do you mean it became the same as the rest of us, does it not work for any of you people either?

Post by **Qdin** » Fri Jan 19, 2007 4:36 am

It does, but everyobdy - but you - got the Common.lvl message. So that's where your was 'unique'. So maybe it became 'normal'?

Search for CamStudio - I think it was called - and record a small video where you open it and recieves the error(s) so we can see what it is.

And when you get the Windows Error, make sure to look under Technical Informations as it will tell where it had an error. it will also show it if it's a corrupted file.

Ipodzanyman · Post by **Ipodzanyman** » Fri Jan 19, 2007 8:47 am

I probably misinterpreted what happened, I have always got the common.lvl "thing" but it doesn't want to open, I'll go research that *CamStudio* thanks Qdin

Ipodzanyman · Post by **Ipodzanyman** » Sat Jan 27, 2007 6:44 pm

Hey Qdin is this the right "Camstudio"?

http://www.camstudio.org/

-I think I might be Down-loading the wrong *stuff* because it seems to not want to work.....

Post by **Qdin** » Sat Jan 27, 2007 7:08 pm

I don't know..

I just saw it was recommended in Off-topic

So it was a suggestion. >.>

RC-1290 · Post by **RC-1290** » Sat Jan 27, 2007 7:38 pm

Getting errors is normal with that tool. This has allready been answered, if you just place the files described in a earlyer topic(I'll look it up for you tomorrow) it will run and give the errors, tough this doesn't matter. I don't know the exact explaination but MaxLoef has explained it allready a few times on Game Toast. But it should run fine WITH those errors. Just ignore them and don't try to fix them.

RC-1290'Dreadnought'

Ipodzanyman · Post by **Ipodzanyman** » Sun Jan 28, 2007 12:34 am

Getting errors is normal with that tool. This has allready been answered, if you just place the files described in a earlyer topic(I'll look it up for you tomorrow) it will run and give the errors, tough this doesn't matter. I don't know the exact explaination but MaxLoef has explained it allready a few times on Game Toast. But it should run fine WITH those errors. Just ignore them and don't try to fix them.

RC-1290'Dreadnought'

-OK that is not the problem, it WILL NOT run, I know about the message error, as I said before it will say the common.lvl problem then I press ok, and it crashes and says "do you want to report this to Microsoft?". All I was trying to see if anyone knows what I should do, because nothing seems to work for me

.... I am thinking of re-downloading the BF2 modtools, but I don't want to waste time downloading if I don't need to.... But thanks for the advice.....

I don't know.. I just saw it was recommended in Off-topic So it was a suggestion. >.>

-oh I thought you used it personally, nm

thanks anyways, it doesn't seem to work, I'll go into the search function and see if the thread exists still....

Post by **Penguin** » Sun Jan 28, 2007 3:15 am

Are you trying to run it by opening a .fx file or by running the .exe in the _lvl_pc ?

Ipodzanyman · Post by **Ipodzanyman** » Sun Jan 28, 2007 5:03 pm

I am trying to run the particleeffectseditor.exe thing in the lvl_pc area....

-sorry I screwed up

Post by **Qdin** » Sun Jan 28, 2007 5:35 pm

.lvl?

t551 · Post by **t551** » Sun Jan 28, 2007 9:07 pm

What effects editor did the devs use?

Ipodzanyman · Post by **Ipodzanyman** » Sun Jan 28, 2007 11:34 pm

OH THANK YOU THAT WORKS!!!!

(sorry for caps

)

Ipodzanyman · Post by **Ipodzanyman** » Mon Jan 29, 2007 6:28 pm

This might sound *stupid* but, I cannot get the effects to not be blocky, I put everything where it is supposed to go... I was also wondering, what are the .dll's theguarder is talking about?

fixed the problem a long time ago I downloaded the .dll's and putted them in the same folder as particle editor.

Post by **Penguin** » Mon Jan 29, 2007 11:06 pm

There was DLL you need to download the swbf II editor to work? hadn't you read that?

also the blocky effects is becouse you don't have the munged textures. copy all the munged effect files and textures from one of your worlds ((Can get them from the build folder I think)) and make a folder called munged in your _lvl_pc folder or where you have the particle editor placed.

Ipodzanyman · Post by **Ipodzanyman** » Mon Jan 29, 2007 11:38 pm

Yep I did that already

thanks anyways

But I must have missed something where is this DLL?

Post by **Penguin** » Tue Jan 30, 2007 7:12 am

I believe it was in one of the threads mentioned earlier? I'll go check

Ipodzanyman · Post by **Ipodzanyman** » Tue Jan 30, 2007 9:32 am

is it the d3dx9_25 thing? I downloaded that...

PE not working properly (SOLVED)

blocky....

RE: blocky....

RE: blocky....

RE: blocky....

RE: blocky....