Where is all_fly_kwing in your sides folder?

What skins did you change? Did you make backups? Did you save with RLE compression off?

Fierfek wrote:Where is all_fly_kwing in your sides folder?

Just search your mod tool folders for it.

Edit: Oops. Didn't notice the first 2 pages.

[RDH]Zerted wrote:

Fierfek wrote:Where is all_fly_kwing in your sides folder?

Just search your mod tool folders for it.

"all_fly_kwing" is in assets\sides\all.

Q1) Which layer to I put vehicle spawns in? [Base] or conquest?

Q2) If I have a neutral Cp with a vehicle spawn atached to it, do I add all_fly_kwing to the "classnuetral" in the vehicle spawn "CalssRepAtk" menu?

Q3) If the above is correct, where in the ***c_con.lua (Republic Era) do I put the "all_fly_kwing"? Under the Rep, or the Cis?

Q1) Put it in whatever layer you want (for instance if you want it in conquest then yes, you would put it in conquest)
Q2) Put it in whatever side you want it. For instance in space all vehicles except for their command vehicle (the gunship for the republic for instance) are neutral.
Q3) Put it under both sides.

[RDH]Zerted wrote:

Fierfek wrote:Where is all_fly_kwing in your sides folder?

Just search your mod tool folders for it.

Aha, no, I'm not looking for the asset, I'm just asking him a question.
IronJaw, can I please see your lua?

Ah, I deleted that set of files after a horrible mix up. The kwing was under:

IronJaw wrote:Ah, I deleted that set of files after a horrible mix up. The kwing was under:

Hidden/Spoiler:

ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"all_fly_kwing")

Yeah, I saw that, and was wondering if you had fixed it.

Yep, on my next test level.

Next problem.
While Munging my level:
Then this pops up:
By TRYc_con.lua
My TRYg_con.lua:
Any thoughts?

Can we see the error log? I'm betting there will be some level chunk errors.

ReadDataFile("sound\\tat.lvl;tat2gcw")
ReadDataFile("SIDE\\all.lvl",
"all_inf_rifleman",
"all_inf_rocketeer",
"all_inf_sniper",
"all_inf_engineer",
"all_inf_officer",
"all_inf_wookiee",
"rep_fly_vwing", -- Loading rep_fly_vwing from default all.lvl not possible
"all_fly_kwing",
"rep_fly_cat_dome", -- Same as vwing
"rep_hover_barcspeeder") -- Same as vwing, and extra ")"
"all_hero_hansolo_tat")

ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper",
"imp_hero_bobafett",
"rep_fly_vwing", -- vwing does not exist in imp.lvl
"all_fly_kwing", -- same as vwing above
"rep_fly_cat_dome", -- same as vwing above
"rep_hover_barcspeeder") -- same as vwing above, extra ")"
"imp_fly_destroyer_dome" )

Your .lua file is quite a mess. Why are you trying to reference all/rep from imp.lvl and all.lvl? Items colored red are errors.

-_- wrote:

ReadDataFile("sound\\tat.lvl;tat2gcw")
ReadDataFile("SIDE\\all.lvl",
"all_inf_rifleman",
"all_inf_rocketeer",
"all_inf_sniper",
"all_inf_engineer",
"all_inf_officer",
"all_inf_wookiee",
"rep_fly_vwing",
"all_fly_kwing",
"rep_fly_cat_dome",
"rep_hover_barcspeeder")
"all_hero_hansolo_tat")

ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper",
"imp_hero_bobafett",
"rep_fly_vwing",
"all_fly_kwing",
"rep_fly_cat_dome",
"rep_hover_barcspeeder")
"imp_fly_destroyer_dome" )

Your .lua file is quite a mess. Why are you trying to reference all/rep from imp.lvl and all.lvl? Items colored red are errors.

I think he already fixed those.

IronJaw wrote: Q3) If the above is correct, where in the ***c_con.lua (Republic Era) do I put the "all_fly_kwing"? Under the Rep, or the Cis?

Par3210 wrote: Q3) Put it under both sides.

I assumed that if you must put "all_fly_kwing" (Which was a Rebel ship/unit) in to both the Rep and CIS sides,that I could do it to the ***g_con.lua.

Fierfek wrote: I think he already fixed those.

From the error he posted, no, he didn't. I didn't even bother looking over the clone wars conquest .lua, but they have pretty much the exact same errors I outlined above.

IronJaw wrote:

IronJaw wrote: Q3) If the above is correct, where in the ***c_con.lua (Republic Era) do I put the "all_fly_kwing"? Under the Rep, or the Cis?

Par3210 wrote: Q3) Put it under both sides.

I assumed that if you must put "all_fly_kwing" (Which was a Rebel ship/unit) in to both the Rep and CIS sides,that I could do it to the ***g_con.lua.

They're wrong. I hate to have to say it this way, but they don't know what they're doing.

all_fly_kwing, as far as I'm concerned, can be only loaded by default from all.lvl unless it's a custom side.

IronJaw wrote:

IronJaw wrote: Q3) If the above is correct, where in the ***c_con.lua (Republic Era) do I put the "all_fly_kwing"? Under the Rep, or the Cis?

Par3210 wrote: Q3) Put it under both sides.

I assumed that if you must put "all_fly_kwing" (Which was a Rebel ship/unit) in to both the Rep and CIS sides,that I could do it to the ***g_con.lua.

Par is wrong.
The k-wing needs to be read on a seperate line: You can't load the kwing from the republic or cis side - it is not in their folder.

I get it now! Each "ReadDataFile("SIDE\\all.lvl"," tells Munge to take those specific files from the "sides" folder and compile them into the "all.lvl" file.

Well, something along those lines.

ReadDataFile("SIDE\\all.lvl"
"all_fly_kwing") -- Game Object is referenced in .lua file, game engines looks in all.req for all_fly_kwing, which leads to all_fly_kwing.req, then to the odf referenced in all_fly_kwing.req.

I have fixed the .lua

Everything works fine, other than no K-wing. I only need to set my other six cp to neutral and start my skin testing.

Thanks for the help!

Question:

Is there a way to have two of the same unite on a side? Would the .lua look like this? (for example, two snipers. [More like the ability to pick one of two skins in-game.])
Or, if I wanted two ep3 .msh useing units, would I have to create another unit?

I would assume that it would be as easy as copying the .msh and .odf of "rep_inf_ep3_sniper" and renaming it, put it in the "rep" sides folder, and add it under the

ReadDataFile("SIDE\\rep.lvl"

in the .lua

*edit* Also, I keep saving new skins over the older ones, (REL compression is off) the pix size is the same, but after I Munge "rep" (the side the new skins are in) they don't show up. HTe originals are still used. I know I save the new skins in the proper data_***\Side\rep\msh folder.

In order to add the additional sniper unit, you must use the AddUnitClass function. Look here for more information (please read through the entire topic).

Look here for information concerning how to set up custom sides properly. It addresses your second question.

Remember, there is a topic stickied at the top of the SWBF2 Modding forum entitled The FAQ / Everything You Need Thread Version 2.0. It contains many links to various modding tutorials. Check it out before asking for help as the answers to your questions may be found there. If not or if you do not understand something, then ask for help.