you mean rep_bldg_forwardcenter? That won't be in sides, it will be in the msh/odf folders.

What do you mean you can't find it? The ODF should be in the Rep ODF folder. (With the MSH and effects in their respective folders) I can find it.

I edited my question the exact same time y'all posted. I mean where is the file I am supposed to type "rep_fly_....."

what? What do you mean? Please be more clear.

The file "rep.lvl" is not it the "side" folder.

data_XYZ\sides\rep\-no rep.lvl

Where in "assets" can I get it?

EDIT: NVM I found it in the XYZc_con.lau file

*EDIT*

Question: How do I switch the clone to Phase I on a custom level?

I have no idea what you are talking about but the rep.lvl is in Star Wars Battlefront II\GameData\DATA\_LVL_PC\SIDE.

Thank you. The question about the rep.lvl was confusion on my part. I file I was looking for was the XYZc_con.lau file. I found it, and have altered in accordingly.

Ironjaw - go into your lua.
Open it with Notepad.
Next go to the section in your lua that looks like this:

SetupTeams{
hero = {
team = ALL,
units = 12,
reinforcements = -1,
soldier = { "all_hero_hansolo_tat",1,2},
assault = { "all_hero_chewbacca", 1,2},
engineer= { "all_hero_luke_jedi", 1,2},
sniper = { "rep_hero_obiwan", 1,2},
officer = { "rep_hero_yoda", 1,2},
special = { "rep_hero_macewindu", 1,2},
},
}

AddUnitClass(ALL,"all_hero_leia", 1,2)
AddUnitClass(ALL,"rep_hero_aalya", 1,2)
AddUnitClass(ALL,"rep_hero_kiyadimundi",1,2)

SetupTeams{
villain = {
team = IMP,
units = 12,
reinforcements = -1,
soldier = { "imp_hero_bobafett", 1,2},
assault = { "imp_hero_darthvader",1,2},
engineer= { "cis_hero_darthmaul", 1,2},
sniper = { "cis_hero_jangofett", 1,2},
officer = { "cis_hero_grievous", 1,2},
special = { "imp_hero_emperor", 1,2},

},
}
AddUnitClass(IMP, "rep_hero_anakin",1,2)
AddUnitClass(IMP, "cis_hero_countdooku",1,2)

Ok now you can replace a unit with your phase one trooper - for instance rep_inf_ep2_rifleman is the normal phase 1 clone.
So I'm gonig to replace han solo with the trooper.
soldier = { "all_hero_hansolo_tat",1,2},
Make it so it looks like this:
soldier = { "rep_inf_ep2_rifleman",1,2},
Next, go up a bit. To this bit.

ReadDataFile("SIDE\\all.lvl",
"all_hero_luke_jedi",
"all_hero_hansolo_tat",
"all_hero_leia",
"all_hero_chewbacca")

ReadDataFile("SIDE\\imp.lvl",
"imp_hero_darthvader",
"imp_hero_emperor",
"imp_hero_bobafett")

ReadDataFile("SIDE\\rep.lvl",
"rep_hero_yoda",
"rep_hero_macewindu",
"rep_hero_anakin",
"rep_hero_aalya",
"rep_hero_kiyadimundi",
"rep_hero_obiwan")

ReadDataFile("SIDE\\cis.lvl",
"cis_hero_grievous",
"cis_hero_darthmaul",
"cis_hero_countdooku",
"cis_hero_jangofett")

This shows you all the units you are loading into the game when it starts up.
Now, go to the bit where it says this:
ReadDataFile("SIDE\\rep.lvl",
"rep_hero_yoda",
"rep_hero_macewindu",
"rep_hero_anakin",
"rep_hero_aalya",
"rep_hero_kiyadimundi",
"rep_hero_obiwan")
and add your unit below rep_hero_obiwan.
Like this:
ReadDataFile("SIDE\\rep.lvl",
"rep_hero_yoda",
"rep_hero_macewindu",
"rep_hero_anakin",
"rep_hero_aalya",
"rep_hero_kiyadimundi",
"rep_hero_obiwan",
"rep_inf_ep2_rifleman")
Then you're all done!
If you can't do this just tell me and post your lua and I'll do it for you.

Thanks! I should be able to get that.

Next:

When I load my level, no unites appear. It's just me and my level. Also the building will appear, but no vehicles. (Come to think of it, I had two different vehicles. I only added on to the .lau. But then the other didn't appear ether.)

*EDIT: It seems that that the "conquest" layer was selected when I put the K-Wing and V-Wings down.*

How do I link a turret to a turret chair? In the .lau, or in ZE?

IronJaw wrote: Also the building will appear, but no vehicles. (Come to think of it, I had two different vehicles. I only added on to the .lau. But then the other didn't appear ether.)

*EDIT: It seems that that the "conquest" layer was selected when I put the K-Wing and V-Wings down.*

I don't know if it's required, but I thought it was. You have to add you vehicles to both of a maps lua files for it to work.
e.g.
Under C:\BF2_ModTools\data_PGS\Common\scripts\PGS
for conquest there are two luas for clone wars conquest: PGSc_con.lua and PGSc_con.lua.bak
they both have to have the new vehicles added into them. If not, you might not have all the required assets in the right place, but then again, maybe you do.

JediJalepinio wrote:

IronJaw wrote: Also the building will appear, but no vehicles. (Come to think of it, I had two different vehicles. I only added on to the .lau. But then the other didn't appear ether.)

*EDIT: It seems that that the "conquest" layer was selected when I put the K-Wing and V-Wings down.*

I don't know if it's required, but I thought it was. You have to add you vehicles to both of a maps lua files for it to work.
e.g.
Under C:\BF2_ModTools\data_PGS\Common\scripts\PGS
for conquest there are two luas for clone wars conquest: PGSc_con.lua and PGSc_con.lua.bak
they both have to have the new vehicles added into them. If not, you might not have all the required assets in the right place, but then again, maybe you do.

lua.bak files are only backups of the normal .lua file - they serve no function in game. In fact, you can delete the backups if you don't want them.

If a vehicle or unit isn't appearing in-game, you either don't have all the necessary assets, set up the vehicle spawn in ZE incorrectly, or did not load it in the .lua properly.

Edit: If you aren't positive your advice is correct, it's best not to go around giving that advice.

I went to the .lua and changed:

ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder",
"rep_fly_vwing",
"all_fly_kwing")

To:

ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep2_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder",
"rep_fly_vwing",
"all_fly_kwing")

*edit*I changed the "rep_ep3_engineer" to "rep_inf_ep2_pilot." I'm Munging as I type.

Also I changed some skins, and added vehicle spawns like so: And Munged it like so: (no error file popped up) But,

1) No Ep2 unite.
2)No vehicles

Any thoughts?

yeah, post your lua and I'll fix it for you. I know where you've gone wrong

Here ya' go:

IronJaw wrote:

Hidden/Spoiler:

--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams")

-- REP Attacking (attacker is always #1)
REP = 1;
CIS = 2;
-- These variables do not change
ATT = REP;
DEF = CIS;


function ScriptPostLoad()


--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}



--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)
conquest:AddCommandPost(cp3)
conquest:AddCommandPost(cp4)

conquest:Start()

EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(200)
SetMaxPlayerFlyHeight (200)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep2_pilot",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder",
"rep_fly_vwing",
"all_fly_kwing")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_darthmaul",
"cis_hover_aat")


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep2_pilot",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 20,
reinforcements = 150,
soldier = { "cis_inf_rifleman",9, 25},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}

SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_anakin")


-- Level Stats
-- ClearWalkers()
AddWalkerType(0, 4) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)
local weaponCnt = 1024
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 32)
SetMemoryPoolSize("EntityFlyer", 32)
SetMemoryPoolSize("EntityHover", 32)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 32)
SetMemoryPoolSize("MountedTurret", 32)
SetMemoryPoolSize("Navigator", 128)
SetMemoryPoolSize("Obstacle", 1024)
SetMemoryPoolSize("PathNode", 1024)
SetMemoryPoolSize("SoundSpaceRegion", 64)
SetMemoryPoolSize("TreeGridStack", 1024)
SetMemoryPoolSize("UnitAgent", 128)
SetMemoryPoolSize("UnitController", 128)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:XYZ\\XYZ.lvl", "XYZ_conquest")
ReadDataFile("dc:XYZ\\XYZ.lvl", "XYZ_conquest")
SetDenseEnvironment("false")




-- Sound

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

OpenAudioStream("sound\\global.lvl", "cw_music")
-- OpenAudioStream("sound\\global.lvl", "global_vo_quick")
-- OpenAudioStream("sound\\global.lvl", "global_vo_slow")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1_emt")

SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)
SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

SetOutOfBoundsVoiceOver(2, "cisleaving")
SetOutOfBoundsVoiceOver(1, "repleaving")

SetAmbientMusic(REP, 1.0, "rep_yav_amb_start", 0,1)
SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
SetAmbientMusic(REP, 0.2, "rep_yav_amb_end", 2,1)
SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start", 0,1)
SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end", 2,1)

SetVictoryMusic(REP, "rep_yav_amb_victory")
SetDefeatMusic (REP, "rep_yav_amb_defeat")
SetVictoryMusic(CIS, "cis_yav_amb_victory")
SetDefeatMusic (CIS, "cis_yav_amb_defeat")

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")
--SetSoundEffect("BirdScatter", "birdsFlySeq1")
--SetSoundEffect("WeaponUnableSelect", "com_weap_inf_weaponchange_null")
--SetSoundEffect("WeaponModeUnableSelect", "com_weap_inf_modechange_null")
SetSoundEffect("SpawnDisplayUnitChange", "shell_select_unit")
SetSoundEffect("SpawnDisplayUnitAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplayBack", "shell_menu_exit")


--OpeningSateliteShot
AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);
AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);
AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);
AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);
AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);
AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);
AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);
AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);
AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);
end

There. All fixed. Change the line I highlighted in red from what it was to what it is now.

Thanks! A question, how do you change the name of an addon map from it's three letter name to it's full name? I had read something about it, but can't find it.

you can but what's the point of it?
You can just change the name of your map using the editlocalize.bat in your data_ABC folder.

I mean:

Currently all maps that I add to my "addon" folder only show up as three letter names in game. e.g. in the map selection screen. How do I change that?

O.o
Maybe you have the version 1.0 patch. I suggest getting the v1.1 patch so you can see the proper names.

Version 1.1 and 1.3 have been loaded. But I still can't get the vehicles or skins to loaded from my earlier post:

IronJaw wrote: Also I changed some skins, and added vehicle spawns like so:

Hidden/Spoiler:

And Munged it like so: (no error file popped up)

Hidden/Spoiler:

But,

1) No Ep2 unite.

Hidden/Spoiler:

2)No vehicles

Any thoughts?

*note* ep2 trooper problem has been fixed.