Cape problem [Solved]

Grievous · Post by **Grievous** » Sat Dec 08, 2012 12:38 pm

Hello,

I need help to display a character's cape. The character is called Pre Vizsla and it has a cape like Boba Feet. I found it in the forum but its cape doesn't appear.

Has anyone ever had this problem? if yes, how did you do to solve it?

Thank you in advance for your help.

Nedarb7 · Post by **Nedarb7** » Sat Dec 08, 2012 12:45 pm

Could you post Pre Vizsla's odf?

Grievous · Post by **Grievous** » Sat Dec 08, 2012 1:21 pm

this are the 3 odf files for Pre Vizsla

Hidden/Spoiler:

[GameObjectClass]

ClassParent     = "cis_inf_Mandalorian_default"

GeometryName        = "man_inf_Mandalorian_Commander.msh"

[Properties]

GeometryName        = "man_inf_Mandalorian_Commander"

GeometryLowRes      = "man_inf_Mandalorian_Commander"

FirstPerson         = ""

ClothODF            = "cis_inf_Mandalorian_cape"

JetJump             = "30.0" //7 //The initial jump-push given when enabling the jet

JetPush             = "50.0" //The constant push given while the jet is enabled (20 is gravity)

JetAcceleration     = "120.0" //Acceleration while hovering.

JetEffect           = "imp_sfx_jetpack"

JetType             = "hover"

JetFuelRechargeRate = "0.20" //Additional fuel per second (fuel is 0 to 1)

JetFuelCost         = "0.001" //Cost per second when hovering (only used for jet-hovers)(fuel is 0 to 1)

JetFuelInitialCost  = "0.1" //initial cost when jet jumping(fuel is 0 to 1)

JetFuelMinBorder    = "0.2" //minimum fuel to perform a jet jump(fuel is 0 to 1)

Hidden/Spoiler:

[GameObjectClass]       

ClassLabel          = "cloth"

[Properties]

attachedmesh	= "man_inf_Mandalorian_Commander"

Hidden/Spoiler:

[GameObjectClass]

ClassParent     	= "com_hero_default"

[Properties]

PointsToUnlock          = 0

MaxHealth 	= 800.0

ExplosionName       	= "cis_inf_droid_exp"

UnitType            	= "Trooper"

WEAPONSECTION = 1

WeaponName     	= "cis_weap_inf_sniper_rifle"

WeaponAmmo     	= 7

WEAPONSECTION = 2

WeaponName     	= "cis_weap_inf_mortar_launcher"

WeaponAmmo     	= 3

WEAPONSECTION = 3

WeaponName     	= "cis_weap_inf_debuff_poison"

WeaponAmmo     	= 1

WeaponChannel  	= 1

WEAPONSECTION = 4

WeaponName     	= "cis_weap_inf_remotedroid"

WeaponAmmo     	= 1

WeaponChannel  	= 1

WEAPONSECTION = 5

WeaponName     	= "cis_weap_inf_smoke_launcher"

WeaponAmmo     	= 1

VOUnitType      	= 093

// the foot height where footstep sounds are played

MinFootHeight = 0.3

VOSound = "cis1_inf_pc_com_hostile      SpottedVO"

VOSound = "cis1_inf_pc_com_bacta      NeedMedicVO"

VOSound = "cis1_inf_pc_com_mechanic      NeedRepairVO"

VOSound = "cis1_inf_pc_com_ammo      NeedAmmoVO"

VOSound = "cis1_inf_pc_com_transport      NeedPickupVO"

VOSound = "cis1_inf_pc_com_backup      NeedBackupVO"

VOSound = "cis1_inf_pc_com_clear_area      AttackPositionVO"

VOSound = "cis1_inf_pc_com_defend     DefendPositionVO"

VOSound = "cis1_inf_pc_com_hostile_inVehicle      SpottedVO +InVehicle"

VOSound = "cis1_inf_pc_com_bacta_inVehicle      NeedMedicVO +InVehicle"

VOSound = "cis1_inf_pc_com_mechanic_inVehicle      NeedRepairVO +InVehicle"

VOSound = "cis1_inf_pc_com_ammo_inVehicle      NeedAmmoVO +InVehicle"

VOSound = "cis1_inf_pc_com_transport_inVehicle      NeedPickupVO +InVehicle"

VOSound = "cis1_inf_pc_com_backup_inVehicle      NeedBackupVO +InVehicle"

VOSound = "cis1_inf_pc_com_clear_area_inVehicle      AttackPositionVO +InVehicle"

VOSound = "cis1_inf_pc_com_defend_inVehicle     DefendPositionVO +InVehicle"

Nedarb7 · Post by **Nedarb7** » Sat Dec 08, 2012 1:27 pm

It looks as if you've set it up correctly

.
Is the name of the cloth odf (just making sure):
cis_inf_Mandalorian_cape

Cleb · Post by **Cleb** » Sat Dec 08, 2012 2:17 pm

Don't you need to hex-edit capes and the like on?

Nedarb7 · Post by **Nedarb7** » Sat Dec 08, 2012 2:48 pm

Not necessarily. Since he downloaded it with the cape on (the asset would not
have came with a cape odf if it hadn't come with a cape) you shouldn't have to
hex-edit anything.

Grievous · Post by **Grievous** » Sat Dec 08, 2012 2:50 pm

the name of the cloth odf is well cis_inf_Mandalorian_cape

Nedarb7 · Post by **Nedarb7** » Sat Dec 08, 2012 2:59 pm

Strange

. It should be working.
When you downloaded Pre Vizsla he came with the
odf files correct?

Grievous · Post by **Grievous** » Sat Dec 08, 2012 3:26 pm

There was no odf file when I downloaded

SpartanA259 · Post by **SpartanA259** » Sat Dec 08, 2012 3:58 pm

I don't know if this will work but instead of using cis_inf_Mandalorian_cape did you try renaming it to man_inf_Mandalorian_Commander_cape?

Hidden/Spoiler:

[GameObjectClass]

ClassParent = "cis_inf_Mandalorian_default"

GeometryName = "man_inf_Mandalorian_Commander.msh"

[Properties]

GeometryName = "man_inf_Mandalorian_Commander"

GeometryLowRes = "man_inf_Mandalorian_Commander"

FirstPerson = ""

ClothODF = "man_inf_Mandalorian_Commander_cape"

JetJump = "30.0" //7 //The initial jump-push given when enabling the jet

JetPush = "50.0" //The constant push given while the jet is enabled (20 is gravity)

JetAcceleration = "120.0" //Acceleration while hovering.

JetEffect = "imp_sfx_jetpack"

JetType = "hover"

JetFuelRechargeRate = "0.20" //Additional fuel per second (fuel is 0 to 1)

JetFuelCost = "0.001" //Cost per second when hovering (only used for jet-hovers)(fuel is 0 to 1)

JetFuelInitialCost = "0.1" //initial cost when jet jumping(fuel is 0 to 1)

JetFuelMinBorder = "0.2" //minimum fuel to perform a jet jump(fuel is 0 to 1)

Nedarb7 · Post by **Nedarb7** » Sat Dec 08, 2012 4:47 pm

Yes rename the cloth odf and the line in Pre Vizsla's odf
and it should work.

Cleb · Post by **Cleb** » Sat Dec 08, 2012 5:55 pm

Nedarb7 wrote:Not necessarily. Since he downloaded it with the cape on (the asset would not
have came with a cape odf if it hadn't come with a cape) you shouldn't have to
hex-edit anything.

Ok my bad. I thought he downloaded the cape by itself and was trying to put it on a his own custom unit.

Post by **AceMastermind** » Sat Dec 08, 2012 8:31 pm

The cloth ODF name has to be the same as the cloth geometry name in the msh file.
Post a link to the asset you're using so we can give you accurate information.

EDIT
forums/viewtopic.php?f=64&t=24475
Pre Vizsla 1.0

Nedarb7 · Post by **Nedarb7** » Sat Dec 08, 2012 10:07 pm

Actually I have found the asset he is using and the cape geometry name is:
man_inf_Mandalorian_Commander_cape

So that means the name of the cape odf should be (of course):
man_inf_Mandalorian_Commander_cape

And the line in Pre Vizsla's odf (again):
man_inf_Mandalorian_Commander_cape

Grievous · Post by **Grievous** » Sun Dec 09, 2012 5:03 am

Thank you for your help. Since I have renamed the ODF file Pre Vizsla's cape appears.

I also wanted to ask if it's possible to block the view "first Person" of a character?

yuke5 · Post by **yuke5** » Sun Dec 09, 2012 5:48 am

I'm not 100% sure, but I think these lines might do it.

Code: Select all

FirstPersonFOV          = "70"
ThirdPersonFOV          = "65"

Grievous · Post by **Grievous** » Sun Dec 09, 2012 6:16 am

I tried, and it doesn't block the view "first Person".

Marth8880 · Post by **Marth8880** » Sun Dec 09, 2012 6:44 am

Adding ForceMode = 1 to a unit's ODF will remove the first-person view and will force third-person.

Grievous · Post by **Grievous** » Sun Dec 09, 2012 1:53 pm

Thank you, it functions.

Cape problem [Solved]

Cape problem [Solved]

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem

Re: cape problem