New Side guys not showing up

Press_Tilty · Post by **Press_Tilty** » Tue Sep 14, 2010 7:44 pm

So I DL'ed the first commando assests pack, set them up with a side, and added them to my lua, and they don't show up in game.

My lua:

Hidden/Spoiler:

--

-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.

--

-- load the gametype script

ScriptCB_DoFile("ObjectiveConquest")

ScriptCB_DoFile("setup_teams") 

	--  REP Attacking (attacker is always #1)

    REP = 1;

    CIS = 2;

    --  These variables do not change

    ATT = REP;

    DEF = CIS;

function ScriptPostLoad()	   

    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "cp1"}

    cp2 = CommandPost:New{name = "cp2"}

    cp3 = CommandPost:New{name = "cp3"}

    cp4 = CommandPost:New{name = "cp4"}

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)    

    conquest:Start()

    EnableSPHeroRules()

 end

---------------------------------------------------------------------------

-- FUNCTION:    ScriptInit

-- PURPOSE:     This function is only run once

-- INPUT:

-- OUTPUT:

-- NOTES:       The name, 'ScriptInit' is a chosen convention, and each

--              mission script must contain a version of this function, as

--              it is called from C to start the mission.

---------------------------------------------------------------------------

function ScriptInit()

    ReadDataFile("ingame.lvl")

    SetMaxFlyHeight(30)

    SetMaxPlayerFlyHeight (30)

    SetMemoryPoolSize ("ClothData",20)

    SetMemoryPoolSize ("Combo",50)              -- should be ~ 2x number of jedi classes

    SetMemoryPoolSize ("Combo::State",650)      -- should be ~12x #Combo

    SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Condition",650)  -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Attack",550)     -- should be ~8-12x #Combo

    SetMemoryPoolSize ("Combo::DamageSample",6000)  -- should be ~8-12x #Combo::Attack

    SetMemoryPoolSize ("Combo::Deflect",100)     -- should be ~1x #combo  

    ReadDataFile("sound\\yav.lvl;yav1cw")

    ReadDataFile("SIDE\\rep.lvl",

                             "rep_inf_ep3_rifleman",

                             "rep_inf_ep3_rocketeer",

                             "rep_inf_ep3_engineer",

                             "rep_inf_ep3_sniper",

                             "rep_inf_ep3_officer",

                             "rep_inf_ep3_jettrooper",

                             "rep_hover_fightertank",

                             "rep_hero_anakin",

                             "rep_hover_barcspeeder")

    ReadDataFile("dc:Side\\jug.lvl",

                             "rep_inf_clone_commando",

                             "rep_inf_default_commando")

    ReadDataFile("SIDE\\cis.lvl",

                             "cis_inf_rifleman",

                             "cis_inf_rocketeer",

                             "cis_inf_engineer",

                             "cis_inf_sniper",

                             "cis_inf_officer",

                             "cis_inf_droideka",

                             "cis_hero_darthmaul",

                             "cis_hover_aat")

    ReadDataFile("SIDE\\tur.lvl", 

    			"tur_bldg_laser",

    			"tur_bldg_tower")          

	SetupTeams{

		rep = {

			team = REP,

			units = 20,

			reinforcements = 150,

			soldier  = { "rep_inf_ep3_rifleman",9, 25},

			assault  = { "rep_inf_ep3_rocketeer",1, 4},

			engineer = { "rep_inf_ep3_engineer",1, 4},

			sniper   = { "rep_inf_ep3_sniper",1, 4},

			officer = {"rep_inf_ep3_officer",1, 4},

			special = { "rep_inf_ep3_jettrooper",1, 4},

		},

		cis = {

			team = CIS,

			units = 20,

			reinforcements = 150,

			soldier  = { "cis_inf_rifleman",9, 25},

			assault  = { "cis_inf_rocketeer",1, 4},

			engineer = { "cis_inf_engineer",1, 4},

			sniper   = { "cis_inf_sniper",1, 4},

			officer = {"cis_inf_officer",1, 4},

			special = { "cis_inf_droideka",1, 4},

		}

	}

    SetHeroClass(CIS, "cis_hero_darthmaul")

    SetHeroClass(REP, "rep_hero_anakin")

AddUnitClass(REP, "rep_inf_clone_commando",1,4)

AddUnitClass(REP, "rep_inf_default_commando",1,4)

    --  Level Stats

    --  ClearWalkers()

    AddWalkerType(0, 4) -- special -> droidekas

    AddWalkerType(1, 0) -- 1x2 (1 pair of legs)

    AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)

    AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)

    local weaponCnt = 1024

    SetMemoryPoolSize("Aimer", 75)

    SetMemoryPoolSize("AmmoCounter", weaponCnt)

    SetMemoryPoolSize("BaseHint", 1024)

    SetMemoryPoolSize("EnergyBar", weaponCnt)

	SetMemoryPoolSize("EntityCloth", 32)

	SetMemoryPoolSize("EntityFlyer", 32)

    SetMemoryPoolSize("EntityHover", 32)

    SetMemoryPoolSize("EntityLight", 200)

    SetMemoryPoolSize("EntitySoundStream", 4)

    SetMemoryPoolSize("EntitySoundStatic", 32)

    SetMemoryPoolSize("MountedTurret", 32)

	SetMemoryPoolSize("Navigator", 128)

    SetMemoryPoolSize("Obstacle", 1024)

	SetMemoryPoolSize("PathNode", 1024)

    SetMemoryPoolSize("SoundSpaceRegion", 64)

    SetMemoryPoolSize("TreeGridStack", 1024)

	SetMemoryPoolSize("UnitAgent", 128)

	SetMemoryPoolSize("UnitController", 128)

	SetMemoryPoolSize("Weapon", weaponCnt)

    SetSpawnDelay(10.0, 0.25)

    --ReadDataFile("dc:MAP\\MAP.lvl", "MAP_conquest")

    ReadDataFile("dc:MAP\\MAP.lvl", "MAP_conquest")

    SetDenseEnvironment("false")

    --  Sound

    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)

    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

    OpenAudioStream("sound\\global.lvl",  "cw_music")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1_emt")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)

    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetOutOfBoundsVoiceOver(2, "cisleaving")

    SetOutOfBoundsVoiceOver(1, "repleaving")

    SetAmbientMusic(REP, 1.0, "rep_yav_amb_start",  0,1)

    SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)

    SetAmbientMusic(REP, 0.2, "rep_yav_amb_end",    2,1)

    SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start",  0,1)

    SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)

    SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_yav_amb_victory")

    SetDefeatMusic (REP, "rep_yav_amb_defeat")

    SetVictoryMusic(CIS, "cis_yav_amb_victory")

    SetDefeatMusic (CIS, "cis_yav_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",      "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut",     "binocularzoomout")

    --SetSoundEffect("BirdScatter",             "birdsFlySeq1")

    --SetSoundEffect("WeaponUnableSelect",      "com_weap_inf_weaponchange_null")

    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")

    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")

    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")

    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")

    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")

    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")

--OpeningSateliteShot

    AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

    AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);

    AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);

    AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);

    AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);

    AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);

    AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);

    AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);

    AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);

    AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);

end

Post by **AQT** » Tue Sep 14, 2010 7:48 pm

AddUnitClass lines should go before SetHeroClass lines. If changing that doesn't work, then there's probably something wrong with your side/units. Post their ODFs and REQs if that is the case.

Press_Tilty · Post by **Press_Tilty** » Tue Sep 14, 2010 7:49 pm

That's not what Caleb's tut said, but i'll try.

Didn't help.

I also haven't modified anything else from the DL...

My req is this:

Hidden/Spoiler:

ucft

{

    REQN

    {

        "lvl"

        "rep_inf_clone_commando"

        "rep_inf_default_commando"

    }

}

Post by **AQT** » Tue Sep 14, 2010 7:57 pm

Do the units have their own individual REQs? Is there a jug.lvl file in your map's side folder?

Press_Tilty · Post by **Press_Tilty** » Tue Sep 14, 2010 9:16 pm

AQT wrote:Do the units have their own individual REQs? Is there a jug.lvl file in your map's side folder?

Yes, and yes, unless you mean the one in _BUILD

Post by **AQT** » Tue Sep 14, 2010 9:29 pm

Press_Tilty wrote:unless you mean the one in _BUILD

I was referring to the location GameData\addon\***\data\_LVL_PC\SIDE. How large is the file jug.lvl then? Can you post the units' ODFs anyway?

Press_Tilty · Post by **Press_Tilty** » Tue Sep 14, 2010 9:36 pm

AQT wrote:
Press_Tilty wrote:unless you mean the one in _BUILD
I was referring to the location GameData\addon\***\data\_LVL_PC\SIDE. How large is the file jug.lvl then? Can you post the units' ODFs anyway?

Yes, and its 1 KB.

Clone commando:

Hidden/Spoiler:

[GameObjectClass]

ClassParent         = "rep_inf_default_commando"

[Properties]

GeometryName        = "RC_inf"

GeometryLowRes      = "RC_inf"

FirstPerson         = "REP\rep;rep_3rd_trooper"

WaterDamageInterval     = "0.0"

WaterDamageAmount       = "0.0"

Default Commando:

Hidden/Spoiler:

[GameObjectClass]

ClassParent         = "rep_inf_default"

[Properties]

UnitType        = "Trooper"

PointsToUnlock      = 12

MaxShield		= 400

AddShield		= 5

MaxHealth 		= 800.0

WEAPONSECTION = 1

WeaponName         = "rep_weap_inf_dcrifle"

WeaponAmmo         = 5

WEAPONSECTION = 2

WeaponName         = "rep_weap_inf_dcsniper"

WeaponAmmo         = 4

WEAPONSECTION = 3

WeaponName         = "rep_weap_inf_anti_armor"

WeaponAmmo         = 4

WEAPONSECTION = 4

WeaponName         = "rep_weap_inf_dc15s_side_arm"

WeaponAmmo         = 0

VOUnitType           = 42

HurtSound               = "clone_commando_chatter_wound"

Post by **AQT** » Tue Sep 14, 2010 10:25 pm

Why are you referencing rep_inf_default_commando in your side's REQ and loading it in your LUA? It's a parent ODF, so all you really need is rep_inf_clone_commando, the actual unit. Have you set up a folder called JUG in the directory data_***\_BUILD\Sides yet? In the JUG folder, you need to copy over the clean and munge batch files from the ALL folder, also in the same directory.

Press_Tilty · Post by **Press_Tilty** » Wed Sep 15, 2010 8:48 pm

Yeah I just realized I don't need him. I'll see what that does.

EDIT1: That didn't help. Trying the other thing now.

EDIT2: No i had already put the JUG folder in the _BUILD dir with those .bats.

Post by **AQT** » Wed Sep 15, 2010 9:15 pm

So it seems with all the information you provided thus far the problem isn't with the way you set up your side or your LUA. Your jug.lvl file turned out to be 1 KB large, but it should be greater than that. What does your munge log say? How about the error log? Have you ever been able to get a custom side to work properly before?

Press_Tilty · Post by **Press_Tilty** » Wed Sep 15, 2010 9:19 pm

AQT wrote:So it seems with all the information you provided thus far the problem isn't with the way you set up your side or your LUA. Your jug.lvl file turned out to be 1 KB large, but it should be greater than that. What does your munge log say? How about the error log? Have you ever been able to get a custom side to work properly before?

I don't get one [a munge log) anymore...idk, haven't tried yet. Will do.

No, but I've only tried once and I think i screwed up the foldering.

---

New problem. I DLed the Christmas sides, put them in the right places, added a dc: to my lua, and now it crashes! What the hey?

It's "dc:Side..." right?

---

The Commando works!

New Side guys not showing up

New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up

Re: New Side guys not showing up