wok_inf_basic is the req name that loads 3 wookie classes.

So you would load the wookies with wok_inf_basic in the ReadDataFile section of your LUA
ReadDataFile("SIDE\\wok.lvl",
"wok_inf_basic")

then list what classes you want for your team in the SetupTeams section of your LUA, which would be:

Example:
assault = { "wok_inf_mechanic",1, 7},
engineer = { "wok_inf_rocketeer",1, 5},
sniper = { "wok_inf_warrior",1, 4},

Teancum wrote:Here's a reply by AceMastermind from another topic:

wok_inf_basic is the req name that loads 3 wookie classes.

So you would load the wookies with wok_inf_basic in the ReadDataFile section of your LUA
ReadDataFile("SIDE\\wok.lvl",
"wok_inf_basic")

then list what classes you want for your team in the SetupTeams section of your LUA, which would be:

Example:
assault = { "wok_inf_mechanic",1, 7},
engineer = { "wok_inf_rocketeer",1, 5},
sniper = { "wok_inf_warrior",1, 4},

Hmmm. I've just added an ATTE in my map. I've also changed the command posts around a bit, so now each team starts off with 2, rather than one. 32 people are on the battle at the same time. For the clones, I had to edit the paths, so more people spawned at one base than the other. So at one base, I put about 40 spawn points, the other, 8.
After I put in the ATTE, about 10 people spawned at base 4 (the one with only 8 spawn points), and at base 2 (the one with 40), only me and another clone. So I took out the ATTE to see what the error was. Now, about 6 - 7 people spawn at base 2, and still about ten at base 8. What happened?
Here is my .lua. Everything for the ATTE is in there, I'm just not loading it in the dc: part.

Hidden/Spoiler:

--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams")

-- REP Attacking (attacker is always #1)
REP = 1;
CIS = 2;
-- These variables do not change
ATT = REP;
DEF = CIS;

wookies = 3


function ScriptPostLoad()
AddAIGoal(3, "Deathmatch", 100)

--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}
cp5 = CommandPost:New{name = "cp5"}
cp6 = CommandPost:New{name = "cp6"}


--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)
conquest:AddCommandPost(cp3)
conquest:AddCommandPost(cp4)
conquest:AddCommandPost(cp5)
conquest:AddCommandPost(cp6)

conquest:Start()

EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(50)
SetMaxPlayerFlyHeight (50)


SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("SIDE\\wok.lvl",
"wok_inf_basic")
ReadDataFile("dc:SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_yoda",
"rep_hover_barcspeeder")
ReadDataFile("dc:SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_marine",
"cis_inf_droideka",
"cis_hero_darthmaul",
"cis_hover_stap",
"cis_walk_dwarfspider",
"cis_tread_snailtank",
"cis_hover_aat")
ReadDataFile("dc:Side\\kit.lvl",
"rep_hero_fisto")
SetClassProperty("rep_hero_fisto", "PointsToUnlock", 25)


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 32,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 32,
reinforcements = 150,
soldier = { "cis_inf_marine",9, 25},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_rifleman",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}
SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_yoda")

SetTeamName (3, "wookies")
AddUnitClass (3, "wok_inf_basic", 8, 10)
SetUnitCount (3, 15)

SetTeamAsFriend(ATT,3)
SetTeamAsFriend(3,ATT)
SetTeamAsEnemy(DEF,3)
SetTeamAsEnemy(3,DEF)


-- Level Stats
ClearWalkers()
AddWalkerType(0, 4) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(0, 1) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 1) -- 3x2 (3 pairs of legs)
local weaponCnt = 1024
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("CommandWalker", 1)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 32)
SetMemoryPoolSize("EntityFlyer", 32)
SetMemoryPoolSize("EntityHover", 32)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 32)
SetMemoryPoolSize("MountedTurret", 32)
SetMemoryPoolSize("Navigator", 128)
SetMemoryPoolSize("Obstacle", 1024)
SetMemoryPoolSize("PathNode", 1024)
SetMemoryPoolSize("SoundSpaceRegion", 64)
SetMemoryPoolSize("TreeGridStack", 1024)
SetMemoryPoolSize("UnitAgent", 128)
SetMemoryPoolSize("UnitController", 128)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:KF1\\KF1.lvl", "KF1_conquest")
ReadDataFile("dc:KF1\\KF1.lvl", "KF1_conquest")
SetDenseEnvironment("true")

NOTE: I was also told that I needed to add another command post, one of the ATTE. I haven't done, but also note that even when I took it out, not enough people spawned.

FragMe! wrote:The sev 3 error in the second last error window about FPM not found, do you have a custom FPM lvl?

Hidden/Spoiler:

Message Severity: 3
C:\Battlefront2\main\Battlefront2\Platform\PC\pcFirstPerson.cpp(69)
FirstPerson::LoadLVLFile: Could not open FPM\kac\kac.lvl

If so did you follow this Custom First Person in order to get it in game?