ooook i dont know how to fix this

Laser_shot · Post by **Laser_shot** » Sun Mar 25, 2007 7:49 am

well it started when i wanted to start modding again :
(note: i tried to re-dwld the modtools and os on)
when i create the map everything is ok and i can play normally on the big grassy square.
but when i set the littlest change in the script,map or anything,i cant even launch bf2 anymore or the map crashes (depends on the changes)
the problem cant come from wrong changes because even the littlest change messes it up.

after :
1.created map in map
2.copyed sides folder 3 munged
-----------------here starts the mess
4. changed the script (very basic,no probs here)
5munged <----- problems here the games dont even launches and blablbla (see above)

the is in the munge window (no mungelog) after the final destructive munge :

Common\munge PC
Copying premunged files from MUNGED...
0 File(s) copied
Copying premunged files from MUNGED\PC...
Done
Munging bump_shader.xml
Munging decal_shader.xml
Munging detail_shader.xml
Munging filtercopy_shader.xml
Munging flare_shader.xml
Munging foliage_shader.xml
Munging hdr_shader.xml
Munging interface_shader.xml
Munging lightbeam_shader.xml
Munging normalmapadder_shader.xml
Munging normal_shader.xml
Munging normal_terrain_shader.xml
Munging ocean_shader.xml
Munging particle_shader.xml
Munging perpixeldiffuselighting_shader.xml
Munging pervertexdiffuselighting_shader.xml
Munging prereflection_shader.xml
Munging rain_shader.xml
Munging refraction_shader.xml
Munging sample_shader.xml
Munging scroll_shader.xml
Munging shadowquad_shader.xml
Munging shield_shader.xml
Munging skyfog_shader.xml
Munging specularlighting_shader.xml
Munging specular_shader.xml
Munging sprite_shader.xml
Munging stencilshadow_shader.xml
Munging terrain_shader.xml
Munging terrain_shader2.xml
Munging water_shader.xml
Munging zprepass_shader.xml
Merging ..\..\Common\Localize\PC\English.cfg...
Merging ..\..\Common\Localize\PC\French.cfg...
Merging ..\..\Common\Localize\PC\german.cfg...
Merging ..\..\Common\Localize\PC\Italian.cfg...
Merging ..\..\Common\Localize\PC\japanese.cfg...
Merging ..\..\Common\Localize\PC\spanish.cfg...
Merging ..\..\Common\Localize\PC\uk_english.cfg...
Merging ..\..\Common\Localize\Comments.cfg...
Merging ..\..\Common\Localize\english.cfg...
Merging ..\..\Common\Localize\french.cfg...
Merging ..\..\Common\Localize\german.cfg...
Merging ..\..\Common\Localize\italian.cfg...
Merging ..\..\Common\Localize\japanese.cfg...
Merging ..\..\Common\Localize\spanish.cfg...
Merging ..\..\Common\Localize\uk_english.cfg...

Munging English.cfg
Munging French.cfg
Munging german.cfg
Munging Italian.cfg
Munging japanese.cfg
Munging spanish.cfg
Munging uk_english.cfg
Munging Comments.cfg

C:\BF2_ModTools\data_DAR\_BUILD\Common>levelpack -inputfile core.req -writefiles MUNGED\PC\core.files -checkdate -continue -platform PC -sourcedir ..\..\Common -inputdir MUNGED\PC -outputdir ..\..\_LVL_PC 2>>"C:\BF2_ModTools\data_DAR\_BUILD\PC_MungeLog.txt"
Munging core.req

C:\BF2_ModTools\data_DAR\_BUILD\Common>levelpack -inputfile common.req -writefiles MUNGED\PC\common.files -common MUNGED\PC\core.files -checkdate -continue -platform PC -sourcedir ..\..\Common -inputdir MUNGED\PC -outputdir ..\..\_LVL_PC 2>>"C:\BF2_ModTools\data_DAR\_BUILD\PC_MungeLog.txt"

C:\BF2_ModTools\data_DAR\_BUILD\Common>levelpack -inputfile ingame.req -writefiles MUNGED\PC\ingame.files -common MUNGED\PC\core.files MUNGED\PC\common.files -checkdate -continue -platform PC -sourcedir ..\..\Common -inputdir MUNGED\PC -outputdir ..\..\_LVL_PC 2>>"C:\BF2_ModTools\data_DAR\_BUILD\PC_MungeLog.txt"

C:\BF2_ModTools\data_DAR\_BUILD\Common>levelpack -inputfile inshell.req -writefiles MUNGED\PC\inshell.files -common MUNGED\PC\core.files MUNGED\PC\common.files -checkdate -continue -platform PC -sourcedir ..\..\Common -inputdir MUNGED\PC -outputdir ..\..\_LVL_PC 2>>"C:\BF2_ModTools\data_DAR\_BUILD\PC_MungeLog.txt"

C:\BF2_ModTools\data_DAR\_BUILD\Common>levelpack -inputfile MISSION\*.req -common MUNGED\PC\core.files MUNGED\PC\common.files MUNGED\PC\ingame.files -checkdate -continue -platform PC -sourcedir ..\..\Common -inputdir MUNGED\PC -outputdir MUNGED\PC 2>>"C:\BF2_ModTools\data_DAR\_BUILD\PC_MungeLog.txt"

C:\BF2_ModTools\data_DAR\_BUILD\Common>levelpack -inputfile MISSION.req -checkdate -continue -platform PC -sourcedir ..\..\Common -inputdir MUNGED\PC -outputdir ..\..\_LVL_PC 2>>"C:\BF2_ModTools\data_DAR\_BUILD\PC_MungeLog.txt"
Worlds\munge PC
munge_world Common PC
Done
Done
Done
munge_world DAR PC
Done
Done
Done
Munging DAR.PTH
Munging DAR_conquest.PTH
Munging DAR.req
The system cannot find the path specified.
Munging DAR.req
The system cannot find the path specified.
Munging addme.lua...done.
Copying files to Battlefront II directory:
"C:\Program Files\LucasArts\Star Wars Battlefront II\GameData"
Addon dir exists, continuing...
Mod dir "DAR"exists, continuing...
Copying addme.script to mod dir...done
Copying "mission.lvl" to modDir\data\_LVL_PC\...done
Copying "core.lvl" to modDir\data\_LVL_PC\...done
Copying "DAR" to modDir\data\_LVL_PC\...done
Copying "SIDE" to modDir\data\_LVL_PC\...done
Munge process finished

can someone help me ?

RC-1290 · Post by **RC-1290** » Sun Mar 25, 2007 7:54 am

what was that change you made. how did you change it. where exactly did you change it. what do you mean with:"copyed sides folder 3 munged "

Laser_shot · Post by **Laser_shot** » Sun Mar 25, 2007 8:24 am

i took the sides i needed in "assets" and coyed them in the sides foler of my map,then munged them
the little change was :
1 dc:side instead of side
2 replaced the ep3 rocketeer with the ep2 rocketeer in the script
,not more

Caleb1117 · Post by **Caleb1117** » Sun Mar 25, 2007 8:44 am

Well I can tell you this much

Code: Select all

Munging DAR.req 
The system cannot find the path specified. 
Munging DAR.req 
The system cannot find the path specified.

that part is unimportant, I get it everytime I munge, on every map I work on.

Post by **Penguin** » Sun Mar 25, 2007 8:46 am

Only copy the sides (and when coping, ONLY copy the needed .odf/mshs/.reqs extra, not the whole side) if you want to edit them.

otherwise leave the readdatafile line.

If you are editing the sides, make sure to copy common and put that in the sides and also to set up the sides fodler with the build and clean.bats in the build folder

Laser_shot · Post by **Laser_shot** » Sun Mar 25, 2007 9:38 am

can u explain that i steps i dont modded for a long time

RC-1290 · Post by **RC-1290** » Sun Mar 25, 2007 10:07 am

She just says that you shouldn't copy over the entire side. Only copy the files of the units that you want to modify. Copying over the common folder is described in the Jedi creation documentation

...

First thing you need to do is create a “sides” folder. Into that folder, copy the “Common” folder from within the mod-tool “assets/sides” directory. Note that this is NOT the same folder as “assets/common”, this is “assets/sides/common”! This folder is necessary because it contains all the things that are used by every side in the game – the default soldier class, default effects and lightsaber meshes, and other things.

Laser_shot · Post by **Laser_shot** » Sun Mar 25, 2007 10:54 am

ok thx and what about the script ? does it stays dc:side....
my computer has problems with reading the documentation

RC-1290 · Post by **RC-1290** » Sun Mar 25, 2007 11:30 am

WHAT? ok. Let's fix that first. What happens if you try to open the Documentation? Maybe you have a corrupt version of the mod Tools. Is MS Word working correctly? Is MS Word the standard program to open .doc files?

Laser_shot · Post by **Laser_shot** » Sun Mar 25, 2007 12:47 pm

well i open the documentation but when i try to read one of the guides i got a 'graphic convertor problem' (lol ?) but back to the older problem i dont know why it dont works,because i already made a perfectly working map who was relaesed in my clan and many testmaps without any disfunction

RC-1290 · Post by **RC-1290** » Sun Mar 25, 2007 1:07 pm

Really Laser_shot, can you PLEASE give more details, it's really impossible to help if you just say that there is a problem of wich you don't know the cause, ALWAYS give crashlogs. Say EXACTLY what you changed and in the case of the documentation I want to know in WHAT way you get this error, WHEN EXACTLY you get this error and maybe even your system properties.

Does windows come up with an error message saying, there is a graphic converter problem so word can not open this. Or does WORD give such an error. does Word open at all or does it crash before it is loaded. etcetera. Please give more details becouse if you don't, we can't really help you very effectively.

RC-1290'Dreadnought'

Laser_shot · Post by **Laser_shot** » Mon Mar 26, 2007 7:14 am

YEES i found the error thank you everybody who helped me (especially RC-1290 ) the error was indeed in the common folder like penguin sayd.
problem solved nothing to say more exept thank you all ^^

ooook i dont know how to fix this

ooook i dont know how to fix this

RE: ooook i dont know how to fix this