-= Gametoast.com =-

Posted: **Fri Apr 04, 2008 6:44 pm**

It appears ingame but I can't capture it. Here is my LUA

Hidden/Spoiler:

[code]--

-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.

--

-- load the gametype script

ScriptCB_DoFile("ObjectiveConquest")

ScriptCB_DoFile("setup_teams") 

	--  REP Attacking (attacker is always #1)

    REP = 1;

    CIS = 2;

    --  These variables do not change

    ATT = REP;

    DEF = CIS;

function ScriptPostLoad()	   

    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "cp1"}

    cp2 = CommandPost:New{name = "cp2"}

    cp3 = CommandPost:New{name = "cp3"}

    cp4 = CommandPost:New{name = "cp4"}

    CP5 = CommandPost:New{name = "CP5"}   

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)    

    conquest:AddCommandPost(CP5)

    conquest:Start()

    EnableSPHeroRules()

 end

---------------------------------------------------------------------------

-- FUNCTION:    ScriptInit

-- PURPOSE:     This function is only run once

-- INPUT:

-- OUTPUT:

-- NOTES:       The name, 'ScriptInit' is a chosen convention, and each

--              mission script must contain a version of this function, as

--              it is called from C to start the mission.

---------------------------------------------------------------------------

function ScriptInit()

    ReadDataFile("ingame.lvl")

    SetMaxFlyHeight(30)

    SetMaxPlayerFlyHeight (30)

    SetMemoryPoolSize ("ClothData",20)

    SetMemoryPoolSize ("Combo",50)              -- should be ~ 2x number of jedi classes

    SetMemoryPoolSize ("Combo::State",650)      -- should be ~12x #Combo

    SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Condition",650)  -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Attack",550)     -- should be ~8-12x #Combo

    SetMemoryPoolSize ("Combo::DamageSample",6000)  -- should be ~8-12x #Combo::Attack

    SetMemoryPoolSize ("Combo::Deflect",100)     -- should be ~1x #combo  

    ReadDataFile("sound\\yav.lvl;yav1cw")

    ReadDataFile("SIDE\\rep.lvl",

                             "rep_inf_ep3_rifleman",

                             "rep_inf_ep3_rocketeer",

                             "rep_inf_ep3_engineer",

                             "rep_inf_ep3_sniper",

                             "rep_inf_ep3_officer",

                             "rep_inf_ep3_jettrooper",

                             "rep_hover_fightertank",

                             "rep_hero_anakin",

                             "rep_hover_barcspeeder")

    ReadDataFile("SIDE\\cis.lvl",

                             "cis_inf_rifleman",

                             "cis_inf_rocketeer",

                             "cis_inf_engineer",

                             "cis_inf_sniper",

                             "cis_inf_officer",

                             "cis_inf_droideka",

                             "cis_hero_darthmaul",

                             "cis_hover_aat")

    ReadDataFile("SIDE\\tur.lvl", 

    			"tur_bldg_laser",

    			"tur_bldg_tower")          

	SetupTeams{

		rep = {

			team = REP,

			units = 20,

			reinforcements = 150,

			soldier  = { "rep_inf_ep3_rifleman",9, 25},

			assault  = { "rep_inf_ep3_rocketeer",1, 4},

			engineer = { "rep_inf_ep3_engineer",1, 4},

			sniper   = { "rep_inf_ep3_sniper",1, 4},

			officer = {"rep_inf_ep3_officer",1, 4},

			special = { "rep_inf_ep3_jettrooper",1, 4},

		},

		cis = {

			team = CIS,

			units = 20,

			reinforcements = 150,

			soldier  = { "cis_inf_rifleman",9, 25},

			assault  = { "cis_inf_rocketeer",1, 4},

			engineer = { "cis_inf_engineer",1, 4},

			sniper   = { "cis_inf_sniper",1, 4},

			officer = {"cis_inf_officer",1, 4},

			special = { "cis_inf_droideka",1, 4},

		}

	}

    SetHeroClass(CIS, "cis_hero_darthmaul")

    SetHeroClass(REP, "rep_hero_anakin")

    --  Level Stats

    --  ClearWalkers()

    AddWalkerType(0, 4) -- special -> droidekas

    AddWalkerType(1, 0) -- 1x2 (1 pair of legs)

    AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)

    AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)

    local weaponCnt = 1024

    SetMemoryPoolSize("Aimer", 75)

    SetMemoryPoolSize("AmmoCounter", weaponCnt)

    SetMemoryPoolSize("BaseHint", 1024)

    SetMemoryPoolSize("EnergyBar", weaponCnt)

	SetMemoryPoolSize("EntityCloth", 32)

	SetMemoryPoolSize("EntityFlyer", 32)

    SetMemoryPoolSize("EntityHover", 32)

    SetMemoryPoolSize("EntityLight", 200)

    SetMemoryPoolSize("EntitySoundStream", 4)

    SetMemoryPoolSize("EntitySoundStatic", 32)

    SetMemoryPoolSize("MountedTurret", 32)

	SetMemoryPoolSize("Navigator", 128)

    SetMemoryPoolSize("Obstacle", 1024)

	SetMemoryPoolSize("PathNode", 1024)

    SetMemoryPoolSize("SoundSpaceRegion", 64)

    SetMemoryPoolSize("TreeGridStack", 1024)

	SetMemoryPoolSize("UnitAgent", 128)

	SetMemoryPoolSize("UnitController", 128)

	SetMemoryPoolSize("Weapon", weaponCnt)

    SetSpawnDelay(10.0, 0.25)

    --ReadDataFile("dc:GCY\\GCY.lvl", "GCY_conquest")

    ReadDataFile("dc:GCY\\GCY.lvl", "GCY_conquest")

    SetDenseEnvironment("false")

    --  Sound

    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)

    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

    OpenAudioStream("sound\\global.lvl",  "cw_music")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1_emt")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)

    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetOutOfBoundsVoiceOver(2, "cisleaving")

    SetOutOfBoundsVoiceOver(1, "repleaving")

    SetAmbientMusic(REP, 1.0, "rep_yav_amb_start",  0,1)

    SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)

    SetAmbientMusic(REP, 0.2, "rep_yav_amb_end",    2,1)

    SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start",  0,1)

    SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)

    SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_yav_amb_victory")

    SetDefeatMusic (REP, "rep_yav_amb_defeat")

    SetVictoryMusic(CIS, "cis_yav_amb_victory")

    SetDefeatMusic (CIS, "cis_yav_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",      "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut",     "binocularzoomout")

    --SetSoundEffect("BirdScatter",             "birdsFlySeq1")

    --SetSoundEffect("WeaponUnableSelect",      "com_weap_inf_weaponchange_null")

    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")

    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")

    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")

    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")

    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")

    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")

--OpeningSateliteShot

    AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

    AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);

    AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);

    AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);

    AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);

    AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);

    AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);

    AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);

    AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);

    AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);

end

[/code]

The added one is CP5.

Posted: **Fri Apr 04, 2008 6:47 pm**

Did you add a capture region then in ZE click on the CP and put the name of the region in the capture region blank?

Posted: **Fri Apr 04, 2008 6:51 pm**

Yes.

Posted: **Fri Apr 04, 2008 6:56 pm**

Make sure your references are spelled correctly, and alo make sure you didn't use an uncapturable Command Post type. (The CTF or Assault ones)

Posted: **Fri Apr 04, 2008 7:22 pm**

Try going in to the cp`s propertys (in ZE) and set the radius to 6.

Posted: **Fri Apr 04, 2008 7:57 pm**

This seems it is not going well. You all seem clueless!

Posted: **Fri Apr 04, 2008 8:01 pm**

Commander_Cody771 wrote:This seems it is not going well. You all seem clueless!

Big words from the guy who doesn't know what his problem is. They're just trying to help.

First thing I would do is to remove the capital "CP"s from your .lua.

You wrote:

Code: Select all

CP5 = CommandPost:New{name = "CP5"}

Depending on what your commandpost is actually called in ZE (I'd be willing to bet that it's lowercase "cp"), that should be changed in whole or in part.

If your CP is called cp5, it should be changed to:

Code: Select all

 cp5 = CommandPost:New{name = "cp5"}

If it actually is "CP5," then it should be:

Code: Select all

 cp5 = CommandPost:New{name = "CP5"}

And of course, make sure the "name" from the above lines is matched to the name in the following:

Code: Select all

conquest:AddCommandPost(commandpostname)

Posted: **Fri Apr 04, 2008 8:08 pm**

Nice spot Mav, I bet that is the problem.

Posted: **Fri Apr 04, 2008 8:36 pm**

Yes I will try it out tomarrow.

Posted: **Sat Apr 05, 2008 1:13 am**

Maveritchell wrote:And of course, make sure the "name" from the above lines is matched to the name in the following:
Code: Select all
conquest:AddCommandPost(commandpostname)

Sorry, but thats wrong. I color coded the parts that need to match (match up the colors):

Hidden/Spoiler:

cp1 = CommandPost:New{name = "cp1"}

conquest:AddCommandPost(cp1)

However, I agree with everything else Maveritchell said.

Posted: **Sat Apr 05, 2008 10:12 am**

Whoopsie-daisy. It was a long day and I was tired (and somewhat irritated) when I wrote that, good catch.

-= Gametoast.com =-

CPs not working!

CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!

Re: CPs not working!