-= Gametoast.com =-

Hi,
I have some Questions:
1. Is it possible to let AT-TE's move at walls?(Like this one in TCW on Teth)
2. How did Forcemaster in his Tethmap that the LA-AT's start such high(when you press [space] the LA-AT's raise up much higher then the originals.)
3.What do i have to do, if i want that "my" LA-AT's move only when i press "w" and when i press "s" they fly back.

Thank you

CT-26-6958_Hevy wrote:Hi,
I have some Questions:
1. Is it possible to let AT-TE's move at walls?(Like this one in TCW on Teth)
2. How did Forcemaster in his Tethmap that the LA-AT's start such high(when you press [space] the LA-AT's raise up much higher then the originals.)
3.What do i have to do, if i want that "my" LA-AT's move only when i press "w" and when i press "s" they fly back.

Thank you

1) No
2) He set TakeOffHeight to a high number in the odf
3) Not really sure, but something in the odf I guess (forward speed, max speed etc)

3. Set MinSpeed to a negative value

Thank you guys
And how can i add the Lasers from the Arc 170 to the LA-AT?

To answer your question: open the gunship ODF in Notepad. Go to Edit and choose the Replace... option. Type in rep_weap_fly_gunship_cannon for the Find what: box and type in rep_weap_fly_arc170_cannon for the Replace with: box. Then click Replace. That should do it.

Thank you for the quick and early Answer
Is there a LA-AT Cockpit in the assets of BF2 or i have to download one?
My Last question for now is, how can i Add new Passager places to the LA-AT(and when the doors are open, there are more troopers standing in the LA-AT)

look through the existing gunship odf. you'll see passenger places ("turret 4" for example). if you want to see the added passengers, you'll have to work moving around where the clones hold on. just copy it down, though i believe you can only have a total of 8 positions.
the part in red should work to make it so that 2 passengers aren't standing together, though you'll have to play around with those co-ordinates

Thank you!
Ill try it.
Can anybody say me how i can turn groups (like a Venator but complete) on(?) a special point?
Because when i now try to turn the Venator, only the peaces turn about there originpoint.

Hold the "Z" button down.

but when i press "z" (i think for me [German] you mean "x") all pieces turn on their middlepoint.
but i want, that a whole group turn around 1 point(the same not their own point)

"Z" is switched with "Y" on the german keyboard

Thank you!

I have 2 more Questions:
1. Is it possible to remove the "a" and "d" (left and right) tendency and make that the LA-AT fly left and right?
2. My LA-AT dont stop immediately(I changed the LA-AT that it only fly when you press "w" but then i have to stop with "s")


EDIT
Sry for Doublepost! (Or Bump)

I have 2 More Question:
1. Is it possible to remove the "a" and "d" (left and right) tendency and make that the LA-AT fly left and right?
2. My LA-AT dont stop immediatelywhen fly back(I changed the LA-AT that it only fly when you press "w" but then i have to stop with "s")

1. i dont think that this is possible with flyers

1) If by "left and right" you mean strafing (like in BFI) you cannot do that with flyers (starfighters) in BFII.
2) In the vehicle's ODF there is MinSpeed, MidSpeed, and MaxSpeed, not to mention Acceleration. Now...

MinSpeed=the slowest speed (English keyboard= "s")
MidSpeed=the default speed when no key is pressed
MaxSpeed=the fast speed, not including the boost (English keyboard= "w")
Acceleration=how fast your ship speeds up/slows down per (second?frame?) to get to the wanted speed (if MinSpeed is 1.0 and MaxSpeed is 10.0 and Acceleration is 5.0, it will take 2 (seconds?frames?) to get to MaxSpeed, which is pretty fast. Calculations:
MaxSpeed/Acceleration = Time
Time x MaxSpeed = Acceleration
Time x Acceleration = MaxSpeed)

So if you want your LAAT to go from MaxSpeed to MinSpeed (your MinSpeed is 0, correct?) in a second, make sure that the Acceleration is the same number as the MaxSpeed. It's actually quite easy to play around with the speeds. Play the game with stock ships and their speeds, then find out what their values are. That'll give you a good indication of how fast a ship goes per number, and makes it easier to guess how fast you want the ship to go.

Regarding your second post (BTW, not moderating or anything) I suggest you edit your posts via the edit button instead of bumping to comply with the rules. It's a lot faster too.

Okay, changed.
But now my map start normal, but there are no CPs where any Unit can Spawn!

My KRLc_con.lua:

At this moment there are no AT-TEs on the field, Only 7 CP's changed nothing on my map!

BFront2.log:

It appears that you've touched the CPs bit of coding in the LUAs. Double-check:

-ZeroEditor: Make sure you have everything right and with the right names.
-LUAs: Check with ZeroEditor on names. Also, I noticed an entry in the MemoryPoolSize part of your LUA called "Flyer". I'm not sure if these are causing the problem. Try commenting (//) the flyer one out and fixing the capitalization mistake in the Command Walker line.

Also, when munging, read what it says. Sometimes if the coding is wrong, VisualMunge will say that it can't read it, causing problems. Wait until the munge finishes then go back and fix the mistake (error log will pop up after munging, telling you what's wrong).

Commenting out is "--" not "//" in LUA. The capitiliaztion should not matter but misspelling will mess things up.

CT-26-6958_Hevy wrote:Okay, changed.
But now my map start normal, but there are no CPs where any Unit can Spawn!

Check your layers and game modes in ZE.

Stardestroyer youre right, i removed the "Flyer" Line and it works... now i only have to get this Sounds to my map and change the Colour of the LA-AT lasers(I Think blue looks much better then green)