-= Gametoast.com =-

Posted: **Thu Feb 21, 2008 2:41 pm**

For no good reason the command posts dissapear:

Message Severity: 2
.\Source\LuaCallbacks_Mission.cpp(3776)
Command Post "cp1" not found

Message Severity: 3
.\Source\LuaHelper.cpp(312)
CallProc failed: (none):0: attempt to perform arithmetic on a nil value
stack traceback:
(none): in function `AddCommandPost'
(none): in function `ScriptPostLoad'

I did not edit the CP's I did not make any changes in map, all I did was munge two new sides, before that everything was fine. I am sick of this error popping up in many maps for no good reason.

Posted: **Thu Feb 21, 2008 3:15 pm**

Are all your scripts normal? Looks like something wrong with these lines:

Hidden/Spoiler:

function ScriptPostLoad()	   

    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "cp1"}

    cp2 = CommandPost:New{name = "cp2"}

    cp3 = CommandPost:New{name = "cp3"}

    cp4 = CommandPost:New{name = "cp4"}

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)    

    conquest:Start()

    EnableSPHeroRules()

 end

Posted: **Thu Feb 21, 2008 4:15 pm**

There is nothing wrong with those lines in my script.

Posted: **Thu Feb 21, 2008 4:31 pm**

You still have just four CPs, right? And in ZeroEdit they're named cp1, cp2, cp3 and cp4?

Posted: **Thu Feb 21, 2008 6:22 pm**

do they show up in ze, are they visible when you are in the conquest layer?

Posted: **Thu Feb 21, 2008 7:12 pm**

Yes they show up in ZE and, I have 9 command Posts all named accordingly.

Posted: **Thu Feb 21, 2008 9:08 pm**

Well then you need to set up 9 CPs in the lua. You only have four set up.

Posted: **Thu Feb 21, 2008 9:12 pm**

O.o Uh Tean, if you mean that other script.. That's not my script LOL I have all of the Command Posts set up in the .lua

Posted: **Thu Feb 21, 2008 11:09 pm**

Could you post your lua?

Posted: **Fri Feb 22, 2008 9:24 am**

I doubt it has anything to do with my .lua.

Hidden/Spoiler:

[code]--

-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.

--

-- load the gametype script

ScriptCB_DoFile("ObjectiveConquest")

ScriptCB_DoFile("setup_teams") 

	--  REP Attacking (attacker is always #1)

    REP = 1;

    CIS = 2;

    --  These variables do not change

    ATT = REP;

    DEF = CIS;

function ScriptPostLoad()	   

    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "cp1"}

    cp2 = CommandPost:New{name = "cp2"}

    cp3 = CommandPost:New{name = "cp3"}

    cp4 = CommandPost:New{name = "cp4"}

    cp5 = CommandPost:New{name = "cp5"}

    cp6 = CommandPost:New{name = "cp6"}

    cp7 = CommandPost:New{name = "cp7"}

    cp8 = CommandPost:New{name = "cp8"}

    cp9 = CommandPost:New{name = "cp9"}

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)

    conquest:AddCommandPost(cp5)

    conquest:AddCommandPost(cp6)

    conquest:AddCommandPost(cp7)

    conquest:AddCommandPost(cp8)

    conquest:AddCommandPost(cp9)      

    conquest:Start()

    EnableSPHeroRules()

 end

---------------------------------------------------------------------------

-- FUNCTION:    ScriptInit

-- PURPOSE:     This function is only run once

-- INPUT:

-- OUTPUT:

-- NOTES:       The name, 'ScriptInit' is a chosen convention, and each

--              mission script must contain a version of this function, as

--              it is called from C to start the mission.

---------------------------------------------------------------------------

function ScriptInit()

    ReadDataFile("ingame.lvl")

    SetMaxFlyHeight(1000)

    SetMaxPlayerFlyHeight (1000)

    SetMemoryPoolSize ("ClothData",20)

    SetMemoryPoolSize ("Combo",50)              -- should be ~ 2x number of jedi classes

    SetMemoryPoolSize ("Combo::State",650)      -- should be ~12x #Combo

    SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Condition",650)  -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Attack",550)     -- should be ~8-12x #Combo

    SetMemoryPoolSize ("Combo::DamageSample",6000)  -- should be ~8-12x #Combo::Attack

    SetMemoryPoolSize ("Combo::Deflect",100)     -- should be ~1x #combo  

    ReadDataFile("sound\\yav.lvl;yav1cw")

    ReadDataFile("dc:SIDE\\rep.lvl",

                             "rep_inf_ep3_rifleman",

                             "rep_inf_ep3_rocketeer",

                             "rep_inf_ep3_engineer",

                             "rep_inf_ep3_sniper",

                             "rep_inf_ep3_officer",

                             "rep_inf_ep3_jettrooper",

                             "rep_hover_fightertank",

                             "rep_walk_atte",

                             "rep_hover_barcspeeder")

    ReadDataFile("dc:SIDE\\cis.lvl",

                             "cis_inf_rifleman",

                             "cis_inf_rocketeer",

                             "cis_inf_marine",

                             "cis_inf_sniper",

                             "cis_inf_officer",

                             "cis_inf_droideka",

                             "cis_hero_darthmaul",

                             "cis_hover_aat")

    ReadDataFile("dc:SIDE\\vehicles.lvl",

                         "cis_hover_mtt")

    ReadDataFile("dc:SIDE\\atp.lvl",

                         "all_walk_atpt")

    ReadDataFile("SIDE\\tur.lvl", 

    			"tur_bldg_laser",

    			"tur_bldg_tower")

	SetupTeams{

		rep = {

			team = REP,

			units = 90,

			reinforcements = 1000,

			soldier  = { "rep_inf_ep3_rifleman",9, 25},

			assault  = { "rep_inf_ep3_rocketeer",1, 4},

			engineer = { "",1, 4},

			sniper   = { "rep_inf_ep3_sniper",1, 4},

			officer = {"rep_inf_ep3_officer",1, 4},

			special = { "",1, 4},

		},

		cis = {

			team = CIS,

			units = 50,

			reinforcements = 500,

			soldier  = { "cis_inf_rifleman",9, 25},

			assault  = { "all_hero_hansolo_tat",1, 4},

			engineer = { "cis_inf_marine",1, 4},

			sniper   = { "",1, 4},

			officer = {"",1, 4},

			special = { "",1, 4},

		}

	}

    SetHeroClass(CIS, "cis_hero_darthmaul")

    SetHeroClass(REP, "")

    --  Level Stats

    --  ClearWalkers()

    AddWalkerType(0, 4) -- special -> droidekas

    AddWalkerType(1, 0) -- 1x2 (1 pair of legs)

    AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)

    AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)

    local weaponCnt = 1024

    SetMemoryPoolSize("Aimer", 75)

    SetMemoryPoolSize("AmmoCounter", weaponCnt)

    SetMemoryPoolSize("BaseHint", 1024)

      SetMemoryPoolSize("CommandWalker", 4)

    SetMemoryPoolSize("CommandHover", 4)

    SetMemoryPoolSize("CommandFlyer", 4)

    SetMemoryPoolSize("EnergyBar", weaponcnt)

    SetMemoryPoolSize("EntityFlyer", 6)

    SetMemoryPoolSize("EntityWalker", 6)

    SetMemoryPoolSize("EntityHover", 9)

	SetMemoryPoolSize("EntityCloth", 32)

	SetMemoryPoolSize("EntityFlyer", 32)

    SetMemoryPoolSize("EntityHover", 32)

    SetMemoryPoolSize("EntityLight", 200)

    SetMemoryPoolSize("EntitySoundStream", 4)

    SetMemoryPoolSize("EntitySoundStatic", 32)

    SetMemoryPoolSize("MountedTurret", 32)

	SetMemoryPoolSize("Navigator", 128)

    SetMemoryPoolSize("Obstacle", 1024)

	SetMemoryPoolSize("PathNode", 1024)

    SetMemoryPoolSize("SoundSpaceRegion", 64)

    SetMemoryPoolSize("TreeGridStack", 1024)

	SetMemoryPoolSize("UnitAgent", 128)

	SetMemoryPoolSize("UnitController", 128)

	SetMemoryPoolSize("Weapon", weaponCnt)

    SetSpawnDelay(10.0, 0.25)

    --ReadDataFile("dc:RE6\\RE6.lvl", "RE6_conquest")

    ReadDataFile("dc:BOC\\RE6.lvl", "RE6_conquest")

    SetDenseEnvironment("false")

    --  Sound

    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)

    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

    OpenAudioStream("sound\\global.lvl",  "cw_music")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1_emt")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)

    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetOutOfBoundsVoiceOver(2, "cisleaving")

    SetOutOfBoundsVoiceOver(1, "repleaving")

    SetAmbientMusic(REP, 1.0, "rep_yav_amb_start",  0,1)

    SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)

    SetAmbientMusic(REP, 0.2, "rep_yav_amb_end",    2,1)

    SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start",  0,1)

    SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)

    SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_yav_amb_victory")

    SetDefeatMusic (REP, "rep_yav_amb_defeat")

    SetVictoryMusic(CIS, "cis_yav_amb_victory")

    SetDefeatMusic (CIS, "cis_yav_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",      "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut",     "binocularzoomout")

    --SetSoundEffect("BirdScatter",             "birdsFlySeq1")

    --SetSoundEffect("WeaponUnableSelect",      "com_weap_inf_weaponchange_null")

    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")

    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")

    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")

    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")

    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")

    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")

--OpeningSateliteShot

    AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

    AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);

    AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);

    AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);

    AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);

    AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);

    AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);

    AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);

    AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);

    AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);

end

[/code]

Posted: **Fri Feb 22, 2008 11:10 am**

Make sure your ZE commandpost names correspond with the names you're calling in the .lua. Yes, I know it sounds like a broken record, but that's what that error is saying is the problem.

Also, you ought to just comment out lines (for units) if there's no unit being added there (i.e. "special = { "",1, 4},"). Instead of:

Code: Select all

special = { "",1, 4},

make it:

Code: Select all

--special = { "",1, 4},

I don't know if you're going to cause an error having it the way you do, but it seems like it might have the potential to. I could easily be wrong but there's no sense in taking the chance.

Posted: **Fri Feb 22, 2008 11:32 am**

I'll double check the command posts, and I've never had problemes leaving those the way they are put, I'll comment them out.

Posted: **Fri Feb 22, 2008 12:47 pm**

Something is wrong with your cp1. Either its named wrong in ZE or something failes in ScriptInit() before the map data is fully loaded (thus cp1 isn't laoded for your map).

1) Check the CP name
2) Make sure the CP is in a layer loaded for Conquest

What is your map name? Is there a reason why the map's folder is not named the same as the map itself?

-= Gametoast.com =-

Command Posts Error

Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error

Re: Command Posts Error