Page 1 of 1
Map disappears
Posted: Tue Jan 12, 2010 3:43 pm
by Darth_Spiderpig
Hullu
I have encountered a little (BIG) problem on Geonosis.
I fooled around with the AT-TE odf to make only the guns usable (changin the label to armedbuilding didn't help)until I had the idea to delete the piloting part, so the first position is the main turret.
Tha map crashed, I cleaned, changed the odf back to stopck and remunged...still CTD.
I tried a manual clean.
Now the interesting part:
In CW conquest map loads up normal, but then there's only the unit select screen, as seen here:
In all other modes it crashes, saying that there is something with the AT-TE bones, so I replaced the model with it's stock...nothing helps.
could anyone help me?
Re: Map dissapears
Posted: Tue Jan 12, 2010 5:23 pm
by genaral_mitch
It IS the atte. Try another clean.
Re: Map dissapears
Posted: Tue Jan 12, 2010 6:56 pm
by Master_Ben
Try removing the ATTE. If it works, put back the stock ATTE. If you get there, you should be able to try and edit the ODF again. See how far you get before it crashes.
Re: Map dissapears
Posted: Wed Jan 13, 2010 11:40 am
by Darth_Spiderpig
I did that, but now it seems the gunship chunks are crashing it...
Re: Map dissapears
Posted: Wed Jan 13, 2010 12:41 pm
by Teancum
What exactly are you wanting to do with the AT-TE? Does it need to be stationary, or do you just not want humans to pilot it?
Re: Map disappears
Posted: Wed Jan 13, 2010 12:57 pm
by Darth_Spiderpig
Teancum wrote:What exactly are you wanting to do with the AT-TE? Does it need to be stationary, or do you just not want humans to pilot it?
I want them to be stationary.
Only the turret positions should be usable, not the walking part.
So, fixed the gunship chunk error, but I noticed those errors now:
Code: Select all
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LuaHelper.cpp(312)
CallProc failed: bad argument #1 to `SetTeamName' (number expected, got nil)
stack traceback:
[C]: in function `SetTeamName'
(none): in function `SetupTeams'
(none): in function `ScriptInit'
and
Code: Select all
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\WeaponMelee.cpp(3590)
WeaponMelee 'hot_weap_lightsaber_wampa': more damage edges than specified 1
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\WeaponMelee.cpp(3590)
WeaponMelee 'hot_weap_lightsaber_wampa': more damage edges than specified 1
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\WeaponMelee.cpp(3590)
WeaponMelee 'hot_weap_lightsaber_wampa': more damage edges than specified 1
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\WeaponMelee.cpp(3590)
WeaponMelee 'hot_weap_lightsaber_wampa': more damage edges than specified 1
Does the last ones cause a crash?
EDIT: Fixed the crash, but the map still isn't showing up.
Code: Select all
Message Severity: 2
C:\Battlefront2\main\Battlefront2\Source\LuaCallbacks_Mission.cpp(3776)
Command Post "cp1" not found
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LuaHelper.cpp(312)
CallProc failed: (none):0: attempt to perform arithmetic on a nil value
stack traceback:
(none): in function `AddCommandPost'
(none): in function `ScriptPostLoad
Again this stupid error...I copied the lua from the working GCW era, and it seems not to help.
Re: Map disappears
Posted: Wed Jan 13, 2010 7:33 pm
by lucasfart
If you haven't made too many changes to the lua and don't mind redoing them you could always use the .bak lua file which has all the default scripting in it...............
Re: Map disappears
Posted: Wed Jan 13, 2010 8:59 pm
by MercuryNoodles
For that last error, make sure cp1 is present in the right layer in ZE, and make sure the name used in the lua matches the name of the cp in ZE exactly.
Re: Map disappears
Posted: Thu Jan 14, 2010 12:18 pm
by G_M_StYlEr_M
MercuryNoodles wrote:For that last error, make sure cp1 is present in the right layer in ZE, and make sure the name used in the lua matches the name of the cp in ZE exactly.
What about the sides ?
can you have to many
ReadDataFile("dc:SIDE\\XXX.lvl",
in your lua and thats because its crash ?
Re: Map disappears
Posted: Thu Jan 14, 2010 12:27 pm
by Darth_Spiderpig
MercuryNoodles wrote:can you have to many
ReadDataFile("dc:SIDE\\XXX.lvl",
Don't really think so...
This is really strange:
MercuryNoodles wrote:For that last error, make sure cp1 is present in the right layer in ZE
Let's say I put the cp wrong, why does the game finds and load it fine in GCW?
Re: Map disappears
Posted: Thu Jan 14, 2010 1:13 pm
by DarthD.U.C.K.
because you referenced it correctly in the gcw-era or didnt put it in the common/cw layer i suppose
Re: Map disappears
Posted: Fri Jan 15, 2010 1:03 pm
by Darth_Spiderpig
DarthD.U.C.K. wrote:because you referenced it correctly in the gcw-era
Have it exactly the same way in CW (I used a copy of the GCW lua stuff, just for testing.)
DarthD.U.C.K. wrote: didnt put it in the common/cw layer i suppose
CW layer?
In Zero Editor?
Re: Map disappears
Posted: Sat Jan 16, 2010 7:59 am
by MercuryNoodles
Yes, and yes. If it's in the base layer, it's loaded for all modes, and in any other layer it is only loaded with that layer as referenced in the lua. If it's in the gcw_conquest layer, you would need to load that layer through the lua, but that will load everything that's within that layer. Otherwise, it needs to be placed in the cw_conquest layer, which your c_con.lua is scripted to load by default.
Re: Map disappears
Posted: Sat Jan 16, 2010 8:05 am
by Darth_Spiderpig
I have them all in the base layer...and referencing n the lua is exactly the same.
Re: Map disappears
Posted: Sat Jan 16, 2010 8:08 am
by MercuryNoodles
In that case, try a manual clean. If everything's right, then that should clear it up, and/or reveal the real errors once you generate a new log.
Re: Map disappears
Posted: Sat Jan 16, 2010 8:12 am
by Darth_Spiderpig
MercuryNoodles wrote:In that case, try a manual clean.
Again?
Okay, will do.
