Page 1 of 1

Adding New Units [Solved]

Posted: Tue Oct 03, 2006 10:35 am
by adrenalinshake
Could anyone show me a LUA with new units in it please?
Because I can't make new units work.
I had a working map but when i tried to put in a clone commander from the BF1 1.75 patch ( ihave it correctly installed) and munged it.
And when I try to run it in Clone wars (Galactic Civil War works fine) it freezez and sez:
FATAL:
Clould not open MISSION\JABc_con.lvl

Here's something that pops up after mungeing:
C:\BF2_ModTools\ToolsFL\Bin\luac.exe: ..\..\common\scripts\JAB\JABc_con.lua:82: `)' expected (to close `(' at line 74) near `"rep_hover_fightertank"'
ERROR[scriptmunge scripts\JAB\JABc_con.lua]:Could not read input file.ERROR[scriptmunge scripts\JAB\JABc_con.lua]:Could not read input file. [continuing]
2 Errors 0 Warnings

ERROR[PC_modelmunge msh\geo_bldg_geoturret.msh]:AddSegment(geo_bldg_geoturret:shadowvolume): shadow mesh edge 216 / 226 is invalid (edge next == twin == 217)
WARNING[PC_modelmunge msh\geo_bldg_hangar.msh]:geo_bldg_hangar has 3981 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\Pol1_bldg_radar_screens.msh]:Pol1_bldg_radar_screens has 1726 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
1 Errors 2 Warnings
Edit:Here's my Lua (if it helps)
Hidden/Spoiler:
--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams")

-- REP Attacking (attacker is always #1)
REP = 1;
CIS = 2;
-- These variables do not change
ATT = REP;
DEF = CIS;


function ScriptPostLoad()


--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}



--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)
conquest:AddCommandPost(cp3)
conquest:AddCommandPost(cp4)

conquest:Start()

EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(30)
SetMaxPlayerFlyHeight (30)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_inf_boss_commando"
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_durge",
"cis_hover_aat")

ReadDataFile("SIDE\\heroes.lvl",
"cis_hero_durge")

ReadDataFile("dc:SIDE\\infantry.lvl",
"rep_inf_boss_commando")

ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 20,
reinforcements = 150,
soldier = { "cis_inf_rifleman",9, 25},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}

SetHeroClass(CIS, "cis_hero_durge")
SetHeroClass(REP, "rep_hero_anakin")


-- Level Stats
-- ClearWalkers()
AddWalkerType(0, 4) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)
local weaponCnt = 240
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 22)
SetMemoryPoolSize("EntityFlyer", 30)
SetMemoryPoolSize("EntityHover", 20)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 20)
SetMemoryPoolSize("MountedTurret", 25)
SetMemoryPoolSize("Navigator", 49)
SetMemoryPoolSize("Obstacle", 760)
SetMemoryPoolSize("PathNode", 512)
SetMemoryPoolSize("SoundSpaceRegion", 46)
SetMemoryPoolSize("TreeGridStack", 500)
SetMemoryPoolSize("UnitAgent", 49)
SetMemoryPoolSize("UnitController", 49)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:JAB\\JAB.lvl", "JAB_conquest")
ReadDataFile("dc:JAB\\JAB.lvl", "JAB_conquest")
SetDenseEnvironment("false")




-- Sound

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

OpenAudioStream("sound\\global.lvl", "cw_music")
-- OpenAudioStream("sound\\global.lvl", "global_vo_quick")
-- OpenAudioStream("sound\\global.lvl", "global_vo_slow")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1_emt")

SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)
SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

SetOutOfBoundsVoiceOver(2, "cisleaving")
SetOutOfBoundsVoiceOver(1, "repleaving")

SetAmbientMusic(REP, 1.0, "rep_yav_amb_start", 0,1)
SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
SetAmbientMusic(REP, 0.2, "rep_yav_amb_end", 2,1)
SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start", 0,1)
SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end", 2,1)

SetVictoryMusic(REP, "rep_yav_amb_victory")
SetDefeatMusic (REP, "rep_yav_amb_defeat")
SetVictoryMusic(CIS, "cis_yav_amb_victory")
SetDefeatMusic (CIS, "cis_yav_amb_defeat")

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")
--SetSoundEffect("BirdScatter", "birdsFlySeq1")
--SetSoundEffect("WeaponUnableSelect", "com_weap_inf_weaponchange_null")
--SetSoundEffect("WeaponModeUnableSelect", "com_weap_inf_modechange_null")
SetSoundEffect("SpawnDisplayUnitChange", "shell_select_unit")
SetSoundEffect("SpawnDisplayUnitAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplayBack", "shell_menu_exit")


--OpeningSateliteShot
AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);
AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);
AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);
AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);
AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);
AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);
AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);
AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);
AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);
end
What do I Have to do to make it work?
Please help!

RE: New Units

Posted: Tue Oct 03, 2006 12:16 pm
by Hebes24
C:\BF2_ModTools\ToolsFL\Bin\luac.exe: ..\..\common\scripts\JAB\JABc_con.lua:82: `)' expected (to close `(' at line 74) near `"rep_hover_fightertank"'
That means you have something wrong with your lua.

Change this:
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_inf_boss_commando"
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
to this:
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_inf_boss_commando",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
You forgot to put a comma after "rep_inf_boss_commando", so it thought that was the end of the ReadDataFile.

Wait! Why are you loading "rep_inf_boss_commando" from the rep side? He is in SIDE\\infantry.lvl. (you have the conversion pack, right?)

Forget the first stuff and replace this:
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_inf_boss_commando"
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_durge",
"cis_hover_aat")
with this:
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_durge",
"cis_hover_aat")
ReadDataFile("SIDE\\infantry.lvl",
"rep_inf_boss_commando")
You also should look at This Topic for the Conversion Pack global side odf names, and what ReadDataFile's to put them under.

RE: New Units

Posted: Tue Oct 03, 2006 12:36 pm
by adrenalinshake
EDITED:Thanx Hebes24 I'll try that!

RE: New Units

Posted: Tue Oct 03, 2006 12:41 pm
by Captain_Mazda
Hebes*

RE: New Units

Posted: Tue Oct 03, 2006 12:54 pm
by adrenalinshake
I tried it and now my map works , but the new unit isn't in it!
Here's my LUA now (actually only a partr of it):
Hidden/Spoiler:
ReadDataFile("ingame.lvl")


SetMaxFlyHeight(30)
SetMaxPlayerFlyHeight (30)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_durge",
"cis_hover_aat")

ReadDataFile("SIDE\\heroes.lvl",
"cis_hero_durge")

ReadDataFile("SIDE\\infantry.lvl",
"rep_inf_boss_commando")

ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 20,
reinforcements = 150,
soldier = { "cis_inf_rifleman",9, 25},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}

SetHeroClass(CIS, "cis_hero_durge")
SetHeroClass(REP, "rep_hero_anakin")
What did I do wrong?

RE: New Units

Posted: Tue Oct 03, 2006 3:18 pm
by Hebes24
put this line:
AddUnitClass(REP,"rep_inf_boss_commando", 1, 2)
Above the SetHeroClass lines.

RE: New Units

Posted: Wed Oct 04, 2006 4:21 pm
by adrenalinshake
Thanx Hebes it worked!

Posted: Wed Oct 04, 2006 7:09 pm
by -_-
topic closed.