Page 1 of 1

Seperating GCW and CW layers for seperate cps?

Posted: Fri Sep 07, 2007 8:30 am
by MetalcoreRancor
I'm posting this because I honestly dont know where to begin with this, and I do not want to go into zero editor and mess up my map without knowing what the heck Im doing.

So, in essence, is it possible to create a layer in Zero editor and seperate the CW conquest mode cps from GCW conquest mode cps? If so, please give some sort of method how. Much appreciated =)

Re: Seperating GCW and CW layers for seperate cps?

Posted: Fri Sep 07, 2007 8:38 am
by FragMe!
I don't think you can do it in ZE but what about in the LUA.
Have two sets of command posts, lets day for example cwcp1 cw cp2 etc anf gcwcp1 gcwcp2 etc with capture regions and control zones and everything else that is needed then in the two conquests LUAs just add the cwcps in the cw in the add cp section at the top and do the same for gcw. Not sure if that will work but it's a thought.

Re: Seperating GCW and CW layers for seperate cps?

Posted: Fri Sep 07, 2007 8:53 am
by MetalcoreRancor
I see, you're saying only include cps created for cw, in CW lua? That still doesnt stop ai and stuff from using my GCW spawn points.. You see, I'm trying to seperate my map so CW will be in the outerspace section only, and GCW will be inside only. I was thinking something like making a new layer and feed all the CW stuff into it, and somehow make the lua read it?

Re: Seperating GCW and CW layers for seperate cps?

Posted: Fri Sep 07, 2007 9:01 am
by Penguin
Need another layer

once you've done that move or create the stuff you want to appear in that mode in one of the era LUAs change the readdata for the layer to the new one.
ReadDataFile("dc:ESM\\ESM.lvl", "ESM_conquest")
change the conquest part to your new layers name.

Re: Seperating GCW and CW layers for seperate cps?

Posted: Fri Sep 07, 2007 6:20 pm
by MetalcoreRancor
Deleted my last post to avoid double posting.

Anyways, I tried what you said, added the new layer and cps, and directed it in .lua, but it hasnt worked. All it does is when I play the mode, the radar is blank, no cps, so you cant spawn.

Here is my .lua.

Code: Select all

--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams") 
	
	--  REP Attacking (attacker is always #1)
    REP = 2;
    CIS = 1;
    --  These variables do not change
    ATT = CIS;
    DEF = REP;


function ScriptPostLoad()	   
    
    
    --This defines the CPs.  These need to happen first
    cp1 = CommandPost:New{name = "cp1"}
    cp2 = CommandPost:New{name = "cp2"}
    cp3 = CommandPost:New{name = "cp3"}
    cp4 = CommandPost:New{name = "cp4"}
    
    
    
    --This sets up the actual objective.  This needs to happen after cp's are defined
    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 
                                     textATT = "game.modes.con", 
                                     textDEF = "game.modes.con2",
                                     multiplayerRules = true}
    
    --This adds the CPs to the objective.  This needs to happen after the objective is set up
    conquest:AddCommandPost(cp1)
    conquest:AddCommandPost(cp2)
    conquest:AddCommandPost(cp3)
    conquest:AddCommandPost(cp4)    
    
    conquest:Start()

    EnableSPHeroRules()
    
 end


---------------------------------------------------------------------------
-- FUNCTION:    ScriptInit
-- PURPOSE:     This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES:       The name, 'ScriptInit' is a chosen convention, and each
--              mission script must contain a version of this function, as
--              it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()
    
    ReadDataFile("ingame.lvl")
    
   
    SetMaxFlyHeight(2540)
    SetMaxPlayerFlyHeight (2540)
    
    SetMemoryPoolSize ("ClothData",20)
    SetMemoryPoolSize ("Combo",50)              -- should be ~ 2x number of jedi classes
    SetMemoryPoolSize ("Combo::State",650)      -- should be ~12x #Combo
    SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
    SetMemoryPoolSize ("Combo::Condition",650)  -- should be a bit bigger than #Combo::State
    SetMemoryPoolSize ("Combo::Attack",550)     -- should be ~8-12x #Combo
    SetMemoryPoolSize ("Combo::DamageSample",6000)  -- should be ~8-12x #Combo::Attack
    SetMemoryPoolSize ("Combo::Deflect",100)     -- should be ~1x #combo  
    
    ReadDataFile("sound\\yav.lvl;yav1cw")
    ReadDataFile("SIDE\\rep.lvl",
                             "rep_inf_ep3_rifleman",
                             "rep_inf_ep3_rocketeer",
                             "rep_inf_ep3_engineer",
                             "rep_inf_ep3_sniper",
                             "rep_inf_ep3_officer",
                             "rep_inf_ep3_jettrooper",
                             "rep_hover_fightertank",
                             "rep_hero_anakin",
                             "rep_hover_barcspeeder")
    ReadDataFile("SIDE\\cis.lvl",
                             "cis_inf_rifleman",
                             "cis_inf_rocketeer",
                             "cis_inf_engineer",
                             "cis_inf_sniper",
                             "cis_inf_officer",
                             "cis_inf_droideka",
                             "cis_hero_darthmaul",
                             "cis_hover_aat")
                         
                             
    ReadDataFile("dc:SIDE\\tur.lvl", 
    			"tur_bldg_laser",
    			"tur_bldg_tower",
                        "tur_bldg_hoth_lasermortar",
                        "tur_weap_hoth_lasermortar_laser",
                        "com_weap_veh_death_beam",
                        "tur_bldg_rancor_dishturret")
    
    ReadDataFile("dc:SIDE\\cis.lvl",
                "cis_hover_stap",
                "rep_hover_barcspeeder",
                "cis_hover_aat")         
                             
	SetupTeams{
		rep = {
			team = REP,
			units = 20,
			reinforcements = 150,
			soldier  = { "rep_inf_ep3_rifleman",9, 25},
			assault  = { "rep_inf_ep3_rocketeer",1, 4},
			engineer = { "rep_inf_ep3_engineer",1, 4},
			sniper   = { "rep_inf_ep3_sniper",1, 4},
			officer = {"rep_inf_ep3_officer",1, 4},
			special = { "rep_inf_ep3_jettrooper",1, 4},
	        
		},
		cis = {
			team = CIS,
			units = 20,
			reinforcements = 150,
			soldier  = { "cis_inf_rifleman",9, 25},
			assault  = { "cis_inf_rocketeer",1, 4},
			engineer = { "cis_inf_engineer",1, 4},
			sniper   = { "cis_inf_sniper",1, 4},
			officer = {"cis_inf_officer",1, 4},
			special = { "cis_inf_droideka",1, 4},
		}
	}
     
    SetHeroClass(CIS, "cis_hero_darthmaul")
    SetHeroClass(REP, "rep_hero_anakin")
   

    --  Level Stats
    --  ClearWalkers()
    AddWalkerType(0, 4) -- special -> droidekas
    AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
    AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
    AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)
    local weaponCnt = 1024
    SetMemoryPoolSize("Aimer", 75)
    SetMemoryPoolSize("AmmoCounter", weaponCnt)
    SetMemoryPoolSize("BaseHint", 1024)
    SetMemoryPoolSize("EnergyBar", weaponCnt)
	SetMemoryPoolSize("EntityCloth", 32)
	SetMemoryPoolSize("EntityFlyer", 32)
    SetMemoryPoolSize("EntityHover", 32)
    SetMemoryPoolSize("EntityLight", 200)
    SetMemoryPoolSize("EntitySoundStream", 4)
    SetMemoryPoolSize("EntitySoundStatic", 32)
    SetMemoryPoolSize("MountedTurret", 32)
	SetMemoryPoolSize("Navigator", 128)
    SetMemoryPoolSize("Obstacle", 1024)
	SetMemoryPoolSize("PathNode", 1024)
    SetMemoryPoolSize("SoundSpaceRegion", 64)
    SetMemoryPoolSize("TreeGridStack", 1024)
	SetMemoryPoolSize("UnitAgent", 128)
	SetMemoryPoolSize("UnitController", 128)
	SetMemoryPoolSize("Weapon", weaponCnt)
    
    SetSpawnDelay(10.0, 0.25)
    --ReadDataFile("dc:RD2\\RD2.lvl", "RD2_cwspace")
    ReadDataFile("dc:RD2\\RD2.lvl", "cwspace")
    SetDenseEnvironment("false")




    --  Sound
    
    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")
    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")
    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)
    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)
    
    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")
    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)
    
    OpenAudioStream("sound\\global.lvl",  "cw_music")
    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")
    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")
    OpenAudioStream("sound\\yav.lvl",  "yav1")
    OpenAudioStream("sound\\yav.lvl",  "yav1")
    OpenAudioStream("sound\\yav.lvl",  "yav1_emt")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)
    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)
    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)
    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetOutOfBoundsVoiceOver(2, "cisleaving")
    SetOutOfBoundsVoiceOver(1, "repleaving")

    SetAmbientMusic(REP, 1.0, "rep_yav_amb_start",  0,1)
    SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
    SetAmbientMusic(REP, 0.2, "rep_yav_amb_end",    2,1)
    SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start",  0,1)
    SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
    SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_yav_amb_victory")
    SetDefeatMusic (REP, "rep_yav_amb_defeat")
    SetVictoryMusic(CIS, "cis_yav_amb_victory")
    SetDefeatMusic (CIS, "cis_yav_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",      "binocularzoomin")
    SetSoundEffect("ScopeDisplayZoomOut",     "binocularzoomout")
    --SetSoundEffect("BirdScatter",             "birdsFlySeq1")
    --SetSoundEffect("WeaponUnableSelect",      "com_weap_inf_weaponchange_null")
    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")
    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")
    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")
    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")


--OpeningSateliteShot
    AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

    AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);
    AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);
    AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);
    AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);
    AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);
    AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);
    AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);
    AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);
    AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);
end


Re: Seperating GCW and CW layers for seperate cps?

Posted: Sun Sep 09, 2007 12:19 am
by FragMe!
Couple of questions, is cwspace a layer or a mode? The LUA is looking for a mode and the mode then determines which layers it uses. Also the proper call in the lua is the line you have commented out (the one with RD2_cwspace)
Also in ZE did you do the save the MRQ and req thing it says in game modes configure screen? Easiest way to tell is by checking all the .mrq in your world folder.

Re: Seperating GCW and CW layers for seperate cps?

Posted: Sun Sep 09, 2007 7:40 am
by MetalcoreRancor
Yea, Dann Boeing helped me figure it out and its working.

I should of mentioned that. ^_^;

Re: Seperating GCW and CW layers for seperate cps?

Posted: Sun Sep 09, 2007 12:07 pm
by Caleb1117
Perhaps sticky this and add it to the FAQ?