Page 1 of 1
Planning problem [Solved]
Posted: Tue Jul 23, 2013 4:26 pm
by Lorul1
I need to know how to make a planning path split so that about half on my clone troopers go on one path and half on the other. Is there any way to do this?
Re: Planning problem
Posted: Tue Jul 23, 2013 5:02 pm
by Locutus
Err, make 2 smaller hubs and connect them?
---O
--/ \
-o---o
--\ /
---O
If you want a certain percentage to follow you path you can also edit their weight.
Re: Planning problem
Posted: Tue Jul 23, 2013 6:24 pm
by Noobasaurus
Re: Planning problem
Posted: Wed Jul 24, 2013 10:25 pm
by Lorul1
Yeah sorry for not making the problem clear I never knew weights for planning exsisted that's what I was looking for. I set up my planning paths just like the image, but all my clones only went on one planning path. The weights helped
now I just need to figure out how to use them properly
can someone please link me to a guide real quick
Re: Planning problem
Posted: Wed Jul 24, 2013 11:07 pm
by AceMastermind
While in the Planning tab select Edit Weights. Select the 'fork' hub then another. This will draw a line from the center of one hub to the other. Left click this center line and a set of weight sliders will appear on the left side of the user interface. Weights range from 0-100%, set the Soldier weighting to 50. Repeat the steps once more from the 'fork' hub to another hub for a 50/50 split.
[color=#FF8040]ZeroEditor_guide.doc[/color] wrote:
WEIGHTS
By default each connection from a starting hub to a destination hub has a weight of 100. To change the weight of a connection in the AI’s selection process select Edit Weights from the menu and click on a starting hub. The connection will change color to yellow and when the mouse is moved outside the hub a line will be attached to the cursor until a destination hub is selected by clicking on it with the left mouse button. To delete an unattached path weight, click the right mouse button at any time. Once attached to a destination hub, the weight can be changed by entering a new weight in the Weight input field on the menu. WEIGHTS allow for greater control over which connections are used by AI as they move towards their final destination hub next to a command post.
Re: Planning problem
Posted: Thu Jul 25, 2013 1:37 pm
by Lorul1
:greeny: yes! thanks so much