-= Gametoast.com =-

Get more from your games!
http://www.gametoast.com/

Additional command posts not working

http://www.gametoast.com/viewtopic.php?f=27&t=16979

Page 1 of 1

Additional command posts not working

Posted: Thu Jan 08, 2009 7:06 pm
by 501st_commander
i have added a cp to my map but it is not showing up in the game. what do i do to make it show up?
it is a land battle.

Re: added command posts not working

Posted: Thu Jan 08, 2009 7:14 pm
by Fiodis
More details, please. What layer did you add it to? Did you reference it in the LUA? Did you set up spawn paths/capture regions/control regions correctly? Did you double-check their names and their names in the cp's object instance box?

And did you read the getting started doc?

Re: added command posts not working

Posted: Thu Jan 08, 2009 7:33 pm
by 501st_commander
What layer did you add it to?
conquest (the only layer i edited)
Did you reference it in the LUA?
the JTAc_con and the JTAg_con.

Did you set up spawn paths/capture regions/control regions correctly?
i think so.
Did you double-check their names and their names in the cp's object instance box?
i dont know what you mean.
And did you read the getting started doc?
yep

Re: added command posts not working

Posted: Thu Jan 08, 2009 7:36 pm
by computergeek
did you munge?
Also did you set a team for it

Re: added command posts not working

Posted: Thu Jan 08, 2009 7:39 pm
by Fiodis
Not setting up a team would result in a neutral cp.

I mean go back into the conquest layer. Select the cp. Now check everything in the object instance box. This is a vital step. Then double-check your LUA.

Re: added command posts not working

Posted: Thu Jan 08, 2009 8:04 pm
by 501st_commander
ok this is what the object instance says:
captureRegion:
cp5_capture

ControlRegion
cp5_control

SpawPath:
cp5_Spawn

TurretPath
(blank)

AllyCount
(blank)

Radius
0.0
ValueBleed_Alliance
10

ValueBleed_CIS
10

The LUA file JTAc_con:
Hidden/Spoiler:
[code]
--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams")

-- REP Attacking (attacker is always #1)
REP = 1;
CIS = 2;
-- These variables do not change
ATT = REP;
DEF = CIS;


function ScriptPostLoad()


--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}
cp5 = CommandPost:New{name = "cp5"}




--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)
conquest:AddCommandPost(cp3)
conquest:AddCommandPost(cp4)
conquest:AddCommandPost(cp5)

conquest:Start()

EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(30)
SetMaxPlayerFlyHeight (30)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_darthmaul",
"cis_hover_aat")


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 20,
reinforcements = 150,
soldier = { "cis_inf_rifleman",9, 25},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}

SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_anakin")


-- Level Stats
-- ClearWalkers()
AddWalkerType(0, 4) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)
local weaponCnt = 1024
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 32)
SetMemoryPoolSize("EntityFlyer", 32)
SetMemoryPoolSize("EntityHover", 32)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 32)
SetMemoryPoolSize("MountedTurret", 32)
SetMemoryPoolSize("Navigator", 128)
SetMemoryPoolSize("Obstacle", 1024)
SetMemoryPoolSize("PathNode", 1024)
SetMemoryPoolSize("SoundSpaceRegion", 64)
SetMemoryPoolSize("TreeGridStack", 1024)
SetMemoryPoolSize("UnitAgent", 128)
SetMemoryPoolSize("UnitController", 128)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:JTA\\JTA.lvl", "JTA_conquest")
ReadDataFile("dc:JTA\\JTA.lvl", "JTA_conquest")
SetDenseEnvironment("false")




-- Sound

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

OpenAudioStream("sound\\global.lvl", "cw_music")
-- OpenAudioStream("sound\\global.lvl", "global_vo_quick")
-- OpenAudioStream("sound\\global.lvl", "global_vo_slow")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1_emt")

SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)
SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

SetOutOfBoundsVoiceOver(2, "cisleaving")
SetOutOfBoundsVoiceOver(1, "repleaving")

SetAmbientMusic(REP, 1.0, "rep_yav_amb_start", 0,1)
SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
SetAmbientMusic(REP, 0.2, "rep_yav_amb_end", 2,1)
SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start", 0,1)
SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end", 2,1)

SetVictoryMusic(REP, "rep_yav_amb_victory")
SetDefeatMusic (REP, "rep_yav_amb_defeat")
SetVictoryMusic(CIS, "cis_yav_amb_victory")
SetDefeatMusic (CIS, "cis_yav_amb_defeat")

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")
--SetSoundEffect("BirdScatter", "birdsFlySeq1")
--SetSoundEffect("WeaponUnableSelect", "com_weap_inf_weaponchange_null")
--SetSoundEffect("WeaponModeUnableSelect", "com_weap_inf_modechange_null")
SetSoundEffect("SpawnDisplayUnitChange", "shell_select_unit")
SetSoundEffect("SpawnDisplayUnitAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplayBack", "shell_menu_exit")


--OpeningSateliteShot
AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);
AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);
AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);
AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);
AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);
AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);
AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);
AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);
AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);
end

[/code]

the othe LUA file JTAg_con:
Hidden/Spoiler:
[code]
--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

ScriptCB_DoFile("setup_teams")
ScriptCB_DoFile("ObjectiveConquest")

-- Empire Attacking (attacker is always #1)
local ALL = 2
local IMP = 1
-- These variables do not change
local ATT = 1
local DEF = 2

function ScriptPostLoad()


--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}
cp5 = CommandPost:New{name = "cp5"}


--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)
conquest:AddCommandPost(cp3)
conquest:AddCommandPost(cp4)
conquest:AddCommandPost(cp5)

conquest:Start()

EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------

function ScriptInit()

ReadDataFile("ingame.lvl")



SetMaxFlyHeight(40)
SetMaxPlayerFlyHeight(40)


SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo


ReadDataFile("sound\\tat.lvl;tat2gcw")
ReadDataFile("SIDE\\all.lvl",
"all_inf_rifleman",
"all_inf_rocketeer",
"all_inf_sniper",
"all_inf_engineer",
"all_inf_officer",
"all_inf_wookiee",
"all_hero_hansolo_tat")

ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper",
"imp_hero_bobafett",
"imp_fly_destroyer_dome" )

ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_tat_barge",
"tur_bldg_laser")

SetupTeams{
all = {
team = ALL,
units = 20,
reinforcements = 150,
soldier = { "all_inf_rifleman",9, 25},
assault = { "all_inf_rocketeer",1,4},
engineer = { "all_inf_engineer",1,4},
sniper = { "all_inf_sniper",1,4},
officer = { "all_inf_officer",1,4},
special = { "all_inf_wookiee",1,4},

},
imp = {
team = IMP,
units = 20,
reinforcements = 150,
soldier = { "imp_inf_rifleman",9, 25},
assault = { "imp_inf_rocketeer",1,4},
engineer = { "imp_inf_engineer",1,4},
sniper = { "imp_inf_sniper",1,4},
officer = { "imp_inf_officer",1,4},
special = { "imp_inf_dark_trooper",1,4},
},
}

SetHeroClass(ALL, "all_hero_hansolo_tat")
SetHeroClass(IMP, "imp_hero_bobafett")

-- Level Stats
ClearWalkers()
AddWalkerType(0, 0) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)

local weaponCnt = 1024
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 32)
SetMemoryPoolSize("EntityFlyer", 32)
SetMemoryPoolSize("EntityHover", 32)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 32)
SetMemoryPoolSize("MountedTurret", 32)
SetMemoryPoolSize("Navigator", 128)
SetMemoryPoolSize("Obstacle", 1024)
SetMemoryPoolSize("PathNode", 1024)
SetMemoryPoolSize("SoundSpaceRegion", 64)
SetMemoryPoolSize("TreeGridStack", 1024)
SetMemoryPoolSize("UnitAgent", 128)
SetMemoryPoolSize("UnitController", 128)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
ReadDataFile("dc:JTA\\JTA.lvl", "JTA_conquest")
SetDenseEnvironment("false")


-- Sound Stats

voiceSlow = OpenAudioStream("sound\\global.lvl", "all_unit_vo_slow")
AudioStreamAppendSegments("sound\\global.lvl", "imp_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "des_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

voiceQuick = OpenAudioStream("sound\\global.lvl", "all_unit_vo_quick")
AudioStreamAppendSegments("sound\\global.lvl", "imp_unit_vo_quick", voiceQuick)

OpenAudioStream("sound\\global.lvl", "gcw_music")
OpenAudioStream("sound\\tat.lvl", "tat2")
OpenAudioStream("sound\\tat.lvl", "tat2")
-- OpenAudioStream("sound\\global.lvl", "global_vo_quick")
-- OpenAudioStream("sound\\global.lvl", "global_vo_slow")

SetBleedingVoiceOver(ALL, ALL, "all_off_com_report_us_overwhelmed", 1)
SetBleedingVoiceOver(ALL, IMP, "all_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(IMP, ALL, "imp_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(IMP, IMP, "imp_off_com_report_us_overwhelmed", 1)

SetLowReinforcementsVoiceOver(ALL, ALL, "all_off_defeat_im", .1, 1)
SetLowReinforcementsVoiceOver(ALL, IMP, "all_off_victory_im", .1, 1)
SetLowReinforcementsVoiceOver(IMP, IMP, "imp_off_defeat_im", .1, 1)
SetLowReinforcementsVoiceOver(IMP, ALL, "imp_off_victory_im", .1, 1)

SetOutOfBoundsVoiceOver(2, "Allleaving")
SetOutOfBoundsVoiceOver(1, "Impleaving")

SetAmbientMusic(ALL, 1.0, "all_tat_amb_start", 0,1)
SetAmbientMusic(ALL, 0.8, "all_tat_amb_middle", 1,1)
SetAmbientMusic(ALL, 0.2, "all_tat_amb_end", 2,1)
SetAmbientMusic(IMP, 1.0, "imp_tat_amb_start", 0,1)
SetAmbientMusic(IMP, 0.8, "imp_tat_amb_middle", 1,1)
SetAmbientMusic(IMP, 0.2, "imp_tat_amb_end", 2,1)

SetVictoryMusic(ALL, "all_tat_amb_victory")
SetDefeatMusic (ALL, "all_tat_amb_defeat")
SetVictoryMusic(IMP, "imp_tat_amb_victory")
SetDefeatMusic (IMP, "imp_tat_amb_defeat")

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")
--SetSoundEffect("WeaponUnableSelect", "com_weap_inf_weaponchange_null")
--SetSoundEffect("WeaponModeUnableSelect", "com_weap_inf_modechange_null")
SetSoundEffect("SpawnDisplayUnitChange", "shell_select_unit")
SetSoundEffect("SpawnDisplayUnitAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplayBack", "shell_menu_exit")

-- Camera Stats
--Tat2 Mos Eisley
AddCameraShot(0.974338, -0.222180, 0.035172, 0.008020, -82.664650, 23.668301, 43.955681);
AddCameraShot(0.390197, -0.089729, -0.893040, -0.205362, 23.563562, 12.914885, -101.465561);
AddCameraShot(0.169759, 0.002225, -0.985398, 0.012916, 126.972809, 4.039628, -22.020613);
AddCameraShot(0.677453, -0.041535, 0.733016, 0.044942, 97.517807, 4.039628, 36.853477);
AddCameraShot(0.866029, -0.156506, 0.467299, 0.084449, 7.685640, 7.130688, -10.895234);
end
[/code]


the LUA files were in: C:\BF2_ModTools\data_JTA\Common\scripts\JTA

Re: added command posts not working

Posted: Thu Jan 08, 2009 8:13 pm
by computergeek
The CP is named cp5 in Zero Editor correct?
And I don't mean to insult you but did you munge? (I didn't for a good while when I started and I got frustrated)

Re: added command posts not working

Posted: Thu Jan 08, 2009 8:17 pm
by 501st_commander
i did munge with visulemunge before i started to edit my map.
name is: cp5 (exacly as i typed it).

Re: added command posts not working

Posted: Thu Jan 08, 2009 8:37 pm
by Fiodis
Double-check the names of the spawn paths and regions, and their properties. Make sure their names match their properties.


Also, I notice you have cp5_Spawn. Does the spawn path have a capital S?

Re: added command posts not working

Posted: Thu Jan 08, 2009 8:43 pm
by Master_Ben
501st_commander wrote:i did munge with visulemunge before i started to edit my map.
Every time you have made an edit, munge. The file isn't updated automatically.

Re: added command posts not working

Posted: Thu Jan 08, 2009 10:06 pm
by 501st_commander
Double-check the names of the spawn paths and regions, and their properties. Make sure their names match their properties.
cp5_control region property was cp2_control
and my spawn nodes dont have properties (neither does the other 4 preset cp`s)
Every time you have made an edit, munge. The file isn't updated automatically.
with visualmunge? the map does save when i done editing it.

Re: added command posts not working

Posted: Thu Jan 08, 2009 10:09 pm
by computergeek
But those changes don't go to your addon folder
Go to BF2_Modtools/Data_***/_BUILD and run visual munge from in there
*** is your 3 letter word name, in this case JTA

Re: added command posts not working

Posted: Thu Jan 08, 2009 10:26 pm
by Master_Ben
Yes, when you have the wld file it only saves, well, the wld file, and visualmunge compiles it into the lvl files that go in the addon folder.

Re: added command posts not working

Posted: Fri Jan 09, 2009 3:38 am
by [RDH]Zerted
When you change something under the Common folder you also need to check Common when using VisualMunge.

So to fix your CPs:
1) run VisualMunge
2) check Common
3) click Munge

Re: added command posts not working

Posted: Fri Jan 09, 2009 5:56 pm
by 501st_commander
i did have commen checked but it sitll dont work.

Re: added command posts not working

Posted: Fri Jan 09, 2009 9:45 pm
by Master_Ben
And you munged again after you added the CP?

Re: Additional command posts not working

Posted: Sun Jan 11, 2009 3:19 pm
by 501st_commander
2 times.

Re: Additional command posts not working

Posted: Sun Jan 11, 2009 3:26 pm
by Master_Ben
501st_commander wrote:2 times.
lol :) not necessary to do it twice. Hmm... I'm stumped!

Re: Additional command posts not working

Posted: Sun Jan 11, 2009 3:27 pm
by 501st_commander
i give up.
But how can i add stairs to a premade map (jedi temple).

Re: Additional command posts not working

Posted: Sun Jan 11, 2009 10:15 pm
by computergeek
Follow the editing shipped maps tutorial in the Everything You Need to Know thread and add them in ZE
Here's the tutorial
All times are UTC-04:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited