-= Gametoast.com =-

Posted: **Sat Aug 20, 2011 1:21 pm**

So I make a lovely campaign mode for my map. Except I can't spawn because there are no cps. I then put some nice cps in my "c" layer and load them in my campaign lua:

Hidden/Spoiler:

--

-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.

--

-- load the gametype script

ScriptCB_DoFile("ObjectiveConquest")

ScriptCB_DoFile("setup_teams") 

	--  REP Attacking (attacker is always #1)

    REP = 1;

    CIS = 2;

    --  These variables do not change

    ATT = REP;

    DEF = CIS;

function ScriptPostLoad()	   

    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "C_cp1"}

    cp2 = CommandPost:New{name = "C_cp2"}

    cp3 = CommandPost:New{name = "c_cp3"}

    cp4 = CommandPost:New{name = "c_cp4"}

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)    

    conquest:Start()

    EnableSPHeroRules()

 end

---------------------------------------------------------------------------

-- FUNCTION:    ScriptInit

-- PURPOSE:     This function is only run once

-- INPUT:

-- OUTPUT:

-- NOTES:       The name, 'ScriptInit' is a chosen convention, and each

--              mission script must contain a version of this function, as

--              it is called from C to start the mission.

---------------------------------------------------------------------------

function ScriptInit()

    ReadDataFile("ingame.lvl")

    SetMaxFlyHeight(30)

    SetMaxPlayerFlyHeight (30)

    SetMemoryPoolSize ("ClothData",20)

    SetMemoryPoolSize ("Combo",50)              -- should be ~ 2x number of jedi classes

    SetMemoryPoolSize ("Combo::State",650)      -- should be ~12x #Combo

    SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Condition",650)  -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Attack",550)     -- should be ~8-12x #Combo

    SetMemoryPoolSize ("Combo::DamageSample",6000)  -- should be ~8-12x #Combo::Attack

    SetMemoryPoolSize ("Combo::Deflect",100)     -- should be ~1x #combo  

    ReadDataFile("sound\\yav.lvl;yav1cw")

    ReadDataFile("SIDE\\rep.lvl",

                             "rep_inf_ep3_rifleman",

                             "rep_inf_ep3_rocketeer",

                             "rep_inf_ep3_engineer",

                             "rep_inf_ep3_sniper",

                             "rep_inf_ep3_officer",

                             "rep_inf_ep3_jettrooper",

                             "rep_hover_fightertank",

                             "rep_hero_anakin",

                             "rep_hover_barcspeeder")

    ReadDataFile("SIDE\\cis.lvl",

                             "cis_inf_rifleman",

                             "cis_inf_rocketeer",

                             "cis_inf_engineer",

                             "cis_inf_sniper",

                             "cis_inf_officer",

                             "cis_inf_droideka",

                             "cis_hero_darthmaul",

                             "cis_hover_aat")

	SetupTeams{

		rep = {

			team = REP,

			units = 20,

			reinforcements = 150,

			soldier  = { "rep_inf_ep3_rifleman",9, 25},

			assault  = { "rep_inf_ep3_rocketeer",1, 4},

			engineer = { "rep_inf_ep3_engineer",1, 4},

			sniper   = { "rep_inf_ep3_sniper",1, 4},

			officer = {"rep_inf_ep3_officer",1, 4},

			special = { "rep_inf_ep3_jettrooper",1, 4},

		},

		cis = {

			team = CIS,

			units = 20,

			reinforcements = 150,

			soldier  = { "cis_inf_rifleman",9, 25},

			assault  = { "cis_inf_rocketeer",1, 4},

			engineer = { "cis_inf_engineer",1, 4},

			sniper   = { "cis_inf_sniper",1, 4},

			officer = {"cis_inf_officer",1, 4},

			special = { "cis_inf_droideka",1, 4},

		}

	}

    SetHeroClass(CIS, "cis_hero_darthmaul")

    SetHeroClass(REP, "rep_hero_anakin")

    --  Level Stats

    --  ClearWalkers()

    AddWalkerType(0, 4) -- special -> droidekas

    AddWalkerType(1, 0) -- 1x2 (1 pair of legs)

    AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)

    AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)

    local weaponCnt = 1024

    SetMemoryPoolSize("Aimer", 75)

    SetMemoryPoolSize("AmmoCounter", weaponCnt)

    SetMemoryPoolSize("BaseHint", 1024)

    SetMemoryPoolSize("EnergyBar", weaponCnt)

	SetMemoryPoolSize("EntityCloth", 32)

	SetMemoryPoolSize("EntityFlyer", 32)

    SetMemoryPoolSize("EntityHover", 32)

    SetMemoryPoolSize("EntityLight", 200)

    SetMemoryPoolSize("EntitySoundStream", 4)

    SetMemoryPoolSize("EntitySoundStatic", 32)

    SetMemoryPoolSize("MountedTurret", 32)

    SetMemoryPoolSize("SoldierAnimation", 600)

	SetMemoryPoolSize("Navigator", 128)

    SetMemoryPoolSize("Obstacle", 1024)

	SetMemoryPoolSize("PathNode", 1024)

    SetMemoryPoolSize("SoundSpaceRegion", 64)

    SetMemoryPoolSize("TreeGridStack", 1024)

	SetMemoryPoolSize("UnitAgent", 128)

	SetMemoryPoolSize("UnitController", 128)

	SetMemoryPoolSize("Weapon", weaponCnt)

    SetSpawnDelay(10.0, 0.25)

    --ReadDataFile("dc:JUN\\JUN.lvl", "JUN_c")

    ReadDataFile("dc:JUN\\JUN.lvl", "JUN_c")

    SetDenseEnvironment("false")

    --  Sound

    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)

    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

    OpenAudioStream("sound\\global.lvl",  "cw_music")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1_emt")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)

    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetOutOfBoundsVoiceOver(2, "cisleaving")

    SetOutOfBoundsVoiceOver(1, "repleaving")

    SetAmbientMusic(REP, 1.0, "rep_yav_amb_start",  0,1)

    SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)

    SetAmbientMusic(REP, 0.2, "rep_yav_amb_end",    2,1)

    SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start",  0,1)

    SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)

    SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_yav_amb_victory")

    SetDefeatMusic (REP, "rep_yav_amb_defeat")

    SetVictoryMusic(CIS, "cis_yav_amb_victory")

    SetDefeatMusic (CIS, "cis_yav_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",      "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut",     "binocularzoomout")

    --SetSoundEffect("BirdScatter",             "birdsFlySeq1")

    --SetSoundEffect("WeaponUnableSelect",      "com_weap_inf_weaponchange_null")

    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")

    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")

    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")

    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")

    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")

    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")

--OpeningSateliteShot

    AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

    AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);

    AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);

    AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);

    AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);

    AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);

    AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);

    AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);

    AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);

    AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);

end

So I try out my map and they still don't appear, and the mungelog says:

Code: Select all

Message Severity: 2
C:\Battlefront2\main\Battlefront2\Source\LuaCallbacks_Mission.cpp(3776)
Command Post "c_cp1" not found

I think it is loading the wrong layer in the lua, because I put:

Code: Select all

    ReadDataFile("dc:JUN\\JUN.lvl", "JUN_c")

when I might've had to put:

Code: Select all

    ReadDataFile("dc:JUN\\JUN.lvl", "JUN_campaign")

I don't know. Any help? I'm lost.

Posted: **Sun Aug 21, 2011 1:30 am**

cp1 = CommandPost:New{name = "C_cp1"}
cp2 = CommandPost:New{name = "C_cp2"}
cp3 = CommandPost:New{name = "c_cp3"}
cp4 = CommandPost:New{name = "c_cp4"}

I'm no expert on making a campaign mode(I'm still figuring it out myself.) But your problem might have something to do with the inconsistency in the names of your cp's. It might be typo. I don't know if you meant for it to be intentional.

I think what you named they layers doesn't effect the how they're loaded. If you loaded a layer called "c" and if you have a layer in zeroeditor called "c", you should be good. Like I said, I'm no expert.

Posted: **Sun Aug 21, 2011 2:34 pm**

Changed that and it did nothing.

yuke5 wrote:I think what you named they layers doesn't effect the how they're loaded. If you loaded a layer called "c" and if you have a layer in zeroeditor called "c", you should be good. Like I said, I'm no expert.

All of my campaign related layers are called c. I'm going to take a look at the stock stuff.

-= Gametoast.com =-

Campaign Mode Map Switch Error

Campaign Mode Map Switch Error

Re: Campaign Mode Map Switch Error

Re: Campaign Mode Map Switch Error