-= Gametoast.com =-

Get more from your games!
http://www.gametoast.com/

Problem with Lua's (Solved)

http://www.gametoast.com/viewtopic.php?f=27&t=15070

Page 1 of 1

Problem with Lua's (Solved)

Posted: Sun Aug 10, 2008 3:30 pm
by Blade
Here's the situation, I wanted the map that I am working on to be the Republic vs. the Empire. I opened up the lua's of each conquest era (***c_con ***g_con) and copied the ReadDataFile for the Imperial side. Replaced the ReadDataFile for the CIS side with the one for the Imperials. I then copied the SetUpTeams for the Imperial side, and replaced the SetUpTeams for the CIS side. I also changed the Republic's hero to rep_hero_obiwan_old, and called for him in the ReadDataFile. So this is what my ***c_con lua looks like:
Hidden/Spoiler:
[code]--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams")

-- REP Attacking (attacker is always #1)
REP = 1;
CIS = 2;
-- These variables do not change
ATT = REP;
DEF = CIS;


function ScriptPostLoad()


--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}



--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)
conquest:AddCommandPost(cp3)
conquest:AddCommandPost(cp4)

conquest:Start()

EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(30)
SetMaxPlayerFlyHeight (30)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("dc:SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_obiwan_old",
"rep_hover_barcspeeder")

ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper",


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
imp = {
team = IMP,
units = 20,
reinforcements = 150,
soldier = { "imp_inf_rifleman",9, 25},
assault = { "imp_inf_rocketeer",1,4},
engineer = { "imp_inf_engineer",1,4},
sniper = { "imp_inf_sniper",1,4},
officer = { "imp_inf_officer",1,4},
special = { "imp_inf_dark_trooper",1,4},
},
}

SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_obiwan_old")


-- Level Stats
-- ClearWalkers()
AddWalkerType(0, 4) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)
local weaponCnt = 1024
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 32)
SetMemoryPoolSize("EntityFlyer", 32)
SetMemoryPoolSize("EntityHover", 32)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 32)
SetMemoryPoolSize("MountedTurret", 32)
SetMemoryPoolSize("Navigator", 128)
SetMemoryPoolSize("Obstacle", 1024)
SetMemoryPoolSize("PathNode", 1024)
SetMemoryPoolSize("SoundSpaceRegion", 64)
SetMemoryPoolSize("TreeGridStack", 1024)
SetMemoryPoolSize("UnitAgent", 128)
SetMemoryPoolSize("UnitController", 128)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:TT4\\TT4.lvl", "TT4_conquest")
ReadDataFile("dc:TT4\\TT4.lvl", "TT4_conquest")
SetDenseEnvironment("false")




-- Sound

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

OpenAudioStream("sound\\global.lvl", "cw_music")
-- OpenAudioStream("sound\\global.lvl", "global_vo_quick")
-- OpenAudioStream("sound\\global.lvl", "global_vo_slow")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1_emt")

SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)
SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

SetOutOfBoundsVoiceOver(2, "cisleaving")
SetOutOfBoundsVoiceOver(1, "repleaving")

SetAmbientMusic(REP, 1.0, "rep_yav_amb_start", 0,1)
SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
SetAmbientMusic(REP, 0.2, "rep_yav_amb_end", 2,1)
SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start", 0,1)
SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end", 2,1)

SetVictoryMusic(REP, "rep_yav_amb_victory")
SetDefeatMusic (REP, "rep_yav_amb_defeat")
SetVictoryMusic(CIS, "cis_yav_amb_victory")
SetDefeatMusic (CIS, "cis_yav_amb_defeat")

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")
--SetSoundEffect("BirdScatter", "birdsFlySeq1")
--SetSoundEffect("WeaponUnableSelect", "com_weap_inf_weaponchange_null")
--SetSoundEffect("WeaponModeUnableSelect", "com_weap_inf_modechange_null")
SetSoundEffect("SpawnDisplayUnitChange", "shell_select_unit")
SetSoundEffect("SpawnDisplayUnitAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplayBack", "shell_menu_exit")


--OpeningSateliteShot
AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);
AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);
AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);
AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);
AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);
AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);
AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);
AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);
AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);
end

[/code]
Also, I was testing for the first time making the filesize smaller by reducing what the .req calls for, so here's my imp.req.
Hidden/Spoiler:
[code]ucft
{
REQN
{
"lvl"
"imp_droid_probe"
"imp_hero_darthvader"
"imp_hero_emperor"
"imp_hover_fightertank"
"imp_hover_speederbike"
"imp_inf_dark_trooper"
"imp_inf_dark_trooper_hunt"
"imp_inf_engineer"
"imp_inf_engineer_snow"
"imp_inf_marine"
"imp_inf_officer"
"imp_inf_officer_hunt"
"imp_inf_officer_snow"
"imp_inf_officer_gray"
"imp_inf_pilot"
"imp_inf_pilot_atat"
"imp_inf_pilot_atst"
"imp_inf_pilot_tie"
"imp_inf_rifleman"
"imp_inf_rifleman_desert"
"imp_inf_rifleman_snow"
"imp_inf_rocketeer"
"imp_inf_rocketeer_snow"
"imp_inf_sniper"
"imp_inf_sniper_snow"
"imp_veh_remote_terminal"

}
}
[/code]
I then munged, and got these errors.

Code: Select all

C:\BF2_ModTools\ToolsFL\Bin\luac.exe: ..\..\common\scripts\TT4\TT4c_con.lua:98: `)' expected (to close `(' at line 85) near `SetupTeams'
ERROR[scriptmunge scripts\TT4\TT4c_con.lua]:Could not read input file.ERROR[scriptmunge scripts\TT4\TT4c_con.lua]:Could not read input file. [continuing]
   2 Errors    0 Warnings
If anyone can help me figure out what I did wrong, it would be much appreciated :D.

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 3:37 pm
by Xavious
Hidden/Spoiler:
[code]SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
imp = {
team = IMP,
units = 20,
reinforcements = 150,
soldier = { "imp_inf_rifleman",9, 25},
assault = { "imp_inf_rocketeer",1,4},
engineer = { "imp_inf_engineer",1,4},
sniper = { "imp_inf_sniper",1,4},
officer = { "imp_inf_officer",1,4},
special = { "imp_inf_dark_trooper",1,4},
},
}[/code]
Should be
Hidden/Spoiler:
[code]SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
}
imp = {
team = IMP,
units = 20,
reinforcements = 150,
soldier = { "imp_inf_rifleman",9, 25},
assault = { "imp_inf_rocketeer",1,4},
engineer = { "imp_inf_engineer",1,4},
sniper = { "imp_inf_sniper",1,4},
officer = { "imp_inf_officer",1,4},
special = { "imp_inf_dark_trooper",1,4},
},
}[/code]
You were missing a '}' after the setup for the Republic team.

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 3:39 pm
by Blade
Hehe... I was just double checking my MungeLog and noticed that it said expecting ' to close bracket.

Thank you very much, I'm just happy it was a simple, silly mistake :).

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 3:49 pm
by The_Emperor
Just a little trick for the future:
at line 85
obviously means there's something wrong with line 85.
Open the LUA with notepad, press CRTL+G and enter "85". That'll bring you to line 85, where the problem is (or, possibly, you're missing a closing bracket you opened at line 85 on another line)

Saves you some time since you don't have to go through the entire LUA.

EDIT:

Uhh using the CTRL-G way:
Hidden/Spoiler:
ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper",
Should be
Hidden/Spoiler:
ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper")

Yes mr post below this one, that is correct.

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 4:26 pm
by Blade
Ah, ok, I munged again and got the same errors, but this time I went to line 85 and noticed this.

Shouldn't
Hidden/Spoiler:
[code]ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper",[/code]
Be?
Hidden/Spoiler:
[code]ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper")[/code]
I think when I deleted the calls for the fighter tank and AT AT I forgot to add the bracket back onto the end.


Edit
Argh, sorry for the double post, but it's still screwed up.

I, erm, realized I hadn't saved my .lua after I made the changes... :lol:. But when I cleaned and munged, I got a new error...

MungeLog:
Hidden/Spoiler:
[code]C:\BF2_ModTools\ToolsFL\Bin\luac.exe: ..\..\common\scripts\TT4\TT4c_con.lua:123: unexpected symbol near `}'
ERROR[scriptmunge scripts\TT4\TT4c_con.lua]:Could not read input file.ERROR[scriptmunge scripts\TT4\TT4c_con.lua]:Could not read input file. [continuing]
2 Errors 0 Warnings[/code]
The "new and improved" line 85 and lines around it:
Hidden/Spoiler:
[code]ReadDataFile("dc:SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_obiwan_old",
"rep_hover_barcspeeder")

^85^ ReadDataFile("SIDE\\imp.lvl",
"imp_inf_rifleman",
"imp_inf_rocketeer",
"imp_inf_engineer",
"imp_inf_sniper",
"imp_inf_officer",
"imp_inf_dark_trooper")


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
}
imp = {
team = IMP,
units = 20,
reinforcements = 150,
soldier = { "imp_inf_rifleman",9, 25},
assault = { "imp_inf_rocketeer",1,4},
engineer = { "imp_inf_engineer",1,4},
sniper = { "imp_inf_sniper",1,4},
officer = { "imp_inf_officer",1,4},
special = { "imp_inf_dark_trooper",1,4},
},
}
imp = {
team = IMP,
units = 20,
reinforcements = 150,
soldier = { "imp_inf_rifleman",9, 25},
assault = { "imp_inf_rocketeer",1,4},
engineer = { "imp_inf_engineer",1,4},
sniper = { "imp_inf_sniper",1,4},
officer = { "imp_inf_officer",1,4},
special = { "imp_inf_dark_trooper",1,4},
},
}

SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_obiwan_old")[/code]
By the way, that ^85^ isn't in my lua :wink:.

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 4:56 pm
by The_Emperor
I think Xavious gave you one } too many.

And why do you have the imp setup bit twice?

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 5:01 pm
by Blade
Yes, I believe he did. I compared the ***c_con and ***g_con lua's, and there was one too many brackets. I made ***c_con look exactly like ***g_con. Testing now, (but check back in a few minutes for an edit if this doesn't work :P).

As for the imp bit, I noticed that, and I'm not sure, but I deleted it and any traces of... *shudders* brackets that were tied to it.

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 5:03 pm
by [RDH]Zerted
You have two imp sections in SetupTeams. Delete one of them.

Re: Problem with Lua's

Posted: Sun Aug 10, 2008 5:06 pm
by Blade
Blade just wrote:As for the imp bit, I noticed that, and I'm not sure, but I deleted it and any traces of... *shudders* brackets that were tied to it.
Found it :D.

EDIT: Woohoo, woohoohoo, Woohoo, woohoo... yeah, anyway, got it fixed! No mungelog errors at least :P. Thanks for all the help guys :D.
All times are UTC-04:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited