-= Gametoast.com =-

Posted: **Sat May 05, 2007 7:29 pm**

Hello, I just put the Elmo model in to replace vader, in my map.
(see the topic for more detail)
and somehow his feet ended up below the ground.

I basicly just took vader's odf any copied alot into elmos odf now its time for... Spot the ODF error!

Hidden/Spoiler:

[GameObjectClass]

ClassParent             = "com_jedi_default"

[Properties]

AISizeType              = "HOVER"

GeometryName        = "elmo_inf_trooper"

GeometryLowRes      = "elmo_inf_trooper"

ClothODF                = "imp_inf_darthvader_cape"

SkeletonName            = "vader"

SkeletonLowRes          = "vaderlz"

SkeletonRootScale       = "0.80"

CollisionRootScale      = "0.80"

MaxHealth 	    = 1800.0

UseDirectionalJumps     = "0"

MaxSpeed                = 6.5       // base forward speed

MaxStrafeSpeed          = 6.5       // base right/left speed

MaxTurnSpeed            = 3.0       // base turn speed

JumpHeight              = 3.5       // base jump height in meters

JumpForwardSpeedFactor  = 1.3       // boost forward part of velocity by this factor when jumping

JumpStrafeSpeedFactor   = 1.0       // boost side/backward part of velocity by this factor when jumping

RollSpeedFactor         = 1.7       // in forward arc, boost speed by this factor when rolling

Acceleration            = 90.0      // accelerate to full run in about 7/70 = 0.1 seconds

JetAcceleration         = 20.0      // for characters with jet jump, use this acceleration for in air control

SprintAccelerateTime    = 0.05      // accelerate from run to sprint in this time

EnergyDrainSprint       = 40.0      // energy spent per second of sprinting

ControlSpeed            = "sprint 5.00 0.50 0.50"

JetJump             = "7.0"     //The initial jump-push given when enabling the jet

JetPush             = "7.0" //The constant push given while the jet is enabled (20 is gravity)

JetEffect           = ""

JetType             = "hover"

// Vader used JetFuel to control how long he can hover, even though it's not visible in the HUD

JetFuelRechargeRate = "0.9"     //Additional fuel per second (fuel is 0 to 1)

JetFuelCost         = "0.3"     //Cost per second when hovering (only used for jet-hovers)(fuel is 0 to 1)

JetFuelInitialCost  = "0.25"    //4initial cost when jet jumping(fuel is 0 to 1)

JetFuelMinBorder    = "1.0"     //minimum fuel to perform a jet jump(fuel is 0 to 1)

JetShowHud          = 0

JetEnergyDrain      = 30.0

CollisionScale      = "0.0 0.0 0.0"

WEAPONSECTION = 1

WeaponName1             = "krn_weap_lightsaber"

WeaponAmmo1             = 0

WEAPONSECTION = 2

WeaponName2             = "com_weap_inf_sabre_throw"

WeaponAmmo2             = 0

WeaponChannel2          = 1 

WEAPONSECTION = 3

WeaponName3             = "com_weap_inf_force_choke"

WeaponAmmo3             = 0

WeaponChannel3          = 1

CAMERASECTION       = "STAND"

EyePointOffset      = "0.0 1.8 0.0"

TrackCenter         = "0.0 1.8 0.0

TrackOffset         = "0.0 0.0 6.0"

TiltValue      	    = "10.0"

CAMERASECTION       = "STANDZOOM"

EyePointOffset      = "0.0 1.8 0.0"

TrackCenter         = "0.0 1.8 0.0

TrackOffset         = "0.4 0.05 2.8"

TiltValue           = "3.5"

CAMERASECTION       = "CROUCH"

EyePointOffset      = "0.0 1.3 0.0"

TrackCenter         = "0.0 1.3 0.0

TrackOffset         = "0.0 0.15 3.5"

TiltValue           = "5.0"

CAMERASECTION       = "CROUCHZOOM"

EyePointOffset      = "0.0 1.3 0.0"

TrackCenter         = "0.0 1.3 0.0

TrackOffset         = "0.4 0.2 2.8"

TiltValue           = "3.5"

//SOUND

VOUnitType                  = 191

SoldierMusic                = "imp_hero_Vader_lp"

//HurtSound                 = "imp_inf_com_chatter_wound"

//DeathSound                = "imp_inf_com_chatter_death"

AcquiredTargetSound         = ""

HidingSound                 = ""

ApproachingTargetSound      = ""

FleeSound                   = ""

PreparingForDamageSound     = ""

HeardEnemySound             = ""

ShockFadeOutTime            = ""

ShockFadeInTime             = ""

ShockFadeOutGain            = ""

ShockSound                  = ""

ClothingRustleSound         = ""

AmbientSound                = ""

FoleyFXClass                = "imp_inf_soldier"

SndHeroSelectable           = ""

VOSound = "imp_off_response_hero_command      SC_Follow"

VOSound = "imp_off_response_hero_command      SC_StopFollow"

VOSound = "imp_off_response_hero_command     SC_VehicleWaitUp"

VOSound = "imp_off_response_hero_command     SC_GetIn"

VOSound = "imp_off_response_hero_command      SC_GetOut"

Posted: **Sat May 05, 2007 7:46 pm**

Hmmm... I'm not sure, but I would ask Ace since he made the model. A part of the reason why that would happen probably would be because, the Elmo model uses the clone's animations and bones.

Posted: **Sat May 05, 2007 8:09 pm**

You could try increasing the:
SkeletonRootScale
to:
1.25
and see if that helps.

Posted: **Sat May 05, 2007 8:24 pm**

Well, that fixed it, I basicly didn't want him quite so tall, but its not as bad as I thought it would look.
While I'm asking questions, is it possable to lock a force power against use untill a certin amout of points are acrued?

-= Gametoast.com =-

Feet sinking into the terrain [Solved]

Feet sinking into the terrain [Solved]

Feet sink below the terrain