-= Gametoast.com =-

Posted: **Sat Aug 01, 2009 1:47 pm**

i'm back with my 3rd question...

(lets start with saying my map name is RWN)

ok... i wanted to change the skins of the default republic clone trooper so i copied the...

rep_inf_ep3trooper.tga
rep_inf_ep3trooper.msh

... from the folder...

C:\BF2_ModTools\data_RWN\Sides\rep\msh

...then i edited the tga file and did a simple change... i made all the blue, red...
then in C:\BF2_ModTools\data_RWN\Sides\rep\msh i replaced the rep_inf_ep3trooper.tga (ONLY THAT ONE WAS CHANGED) with my new one...

then in this directory...

C:\BF2_ModTools\data_RWN\Common\scripts\RWN

...with the RWNc_con file i changed the SIDE to dc:SIDE... it now looks like this...

Hidden/Spoiler:

--

-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.

--

-- load the gametype script

ScriptCB_DoFile("ObjectiveConquest")

ScriptCB_DoFile("setup_teams") 

	--  REP Attacking (attacker is always #1)

    REP = 1;

    CIS = 2;

    --  These variables do not change

    ATT = REP;

    DEF = CIS;

function ScriptPostLoad()	   

    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "cp1"}

    cp2 = CommandPost:New{name = "cp2"}

    cp3 = CommandPost:New{name = "cp3"}

    cp4 = CommandPost:New{name = "cp4"}

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)    

    conquest:Start()

    EnableSPHeroRules()

 end

---------------------------------------------------------------------------

-- FUNCTION:    ScriptInit

-- PURPOSE:     This function is only run once

-- INPUT:

-- OUTPUT:

-- NOTES:       The name, 'ScriptInit' is a chosen convention, and each

--              mission script must contain a version of this function, as

--              it is called from C to start the mission.

---------------------------------------------------------------------------

function ScriptInit()

    ReadDataFile("ingame.lvl")

    SetMaxFlyHeight(30)

    SetMaxPlayerFlyHeight (30)

    SetMemoryPoolSize ("ClothData",20)

    SetMemoryPoolSize ("Combo",50)              -- should be ~ 2x number of jedi classes

    SetMemoryPoolSize ("Combo::State",650)      -- should be ~12x #Combo

    SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Condition",650)  -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Attack",550)     -- should be ~8-12x #Combo

    SetMemoryPoolSize ("Combo::DamageSample",6000)  -- should be ~8-12x #Combo::Attack

    SetMemoryPoolSize ("Combo::Deflect",100)     -- should be ~1x #combo  

    ReadDataFile("sound\\yav.lvl;yav1cw")

    ReadDataFile("dc:SIDE\\rep.lvl",

                             "rep_inf_ep3_rifleman",

                             "rep_inf_ep3_rocketeer",

                             "rep_inf_ep3_engineer",

                             "rep_inf_ep3_sniper",

                             "rep_inf_ep3_officer",

                             "rep_inf_ep3_jettrooper",

                             "rep_hover_fightertank",

                             "rep_hero_anakin",

                             "rep_hover_barcspeeder")

    ReadDataFile("dc:SIDE\\cis.lvl",

                             "cis_inf_rifleman",

                             "cis_inf_rocketeer",

                             "cis_inf_engineer",

                             "cis_inf_sniper",

                             "cis_inf_officer",

                             "cis_inf_droideka",

                             "cis_hero_darthmaul",

                             "cis_hover_aat")

    ReadDataFile("SIDE\\tur.lvl", 

    			"tur_bldg_laser",

    			"tur_bldg_tower")          

	SetupTeams{

		rep = {

			team = REP,

			units = 20,

			reinforcements = 150,

			soldier  = { "rep_inf_ep3_rifleman",9, 25},

			assault  = { "rep_inf_ep3_rocketeer",1, 4},

			engineer = { "rep_inf_ep3_engineer",1, 4},

			sniper   = { "rep_inf_ep3_sniper",1, 4},

			officer = {"rep_inf_ep3_officer",1, 4},

			special = { "rep_inf_ep3_jettrooper",1, 4},

		},

		cis = {

			team = CIS,

			units = 20,

			reinforcements = 150,

			soldier  = { "cis_inf_rifleman",9, 25},

			assault  = { "cis_inf_rocketeer",1, 4},

			engineer = { "cis_inf_engineer",1, 4},

			sniper   = { "cis_inf_sniper",1, 4},

			officer = {"cis_inf_officer",1, 4},

			special = { "cis_inf_droideka",1, 4},

		}

	}

    SetHeroClass(CIS, "cis_hero_darthmaul")

    SetHeroClass(REP, "rep_hero_anakin")

    --  Level Stats

    --  ClearWalkers()

    AddWalkerType(0, 4) -- special -> droidekas

    AddWalkerType(1, 0) -- 1x2 (1 pair of legs)

    AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)

    AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)

    local weaponCnt = 1024

    SetMemoryPoolSize("Aimer", 75)

    SetMemoryPoolSize("AmmoCounter", weaponCnt)

    SetMemoryPoolSize("BaseHint", 1024)

    SetMemoryPoolSize("EnergyBar", weaponCnt)

	SetMemoryPoolSize("EntityCloth", 32)

	SetMemoryPoolSize("EntityFlyer", 32)

    SetMemoryPoolSize("EntityHover", 32)

    SetMemoryPoolSize("EntityLight", 200)

    SetMemoryPoolSize("EntitySoundStream", 4)

    SetMemoryPoolSize("EntitySoundStatic", 32)

    SetMemoryPoolSize("MountedTurret", 32)

	SetMemoryPoolSize("Navigator", 128)

    SetMemoryPoolSize("Obstacle", 1024)

	SetMemoryPoolSize("PathNode", 1024)

    SetMemoryPoolSize("SoundSpaceRegion", 64)

    SetMemoryPoolSize("TreeGridStack", 1024)

	SetMemoryPoolSize("UnitAgent", 128)

	SetMemoryPoolSize("UnitController", 128)

	SetMemoryPoolSize("Weapon", weaponCnt)

    SetSpawnDelay(10.0, 0.25)

    --ReadDataFile("dc:RWN\\RWN.lvl", "RWN_conquest")

    ReadDataFile("dc:RWN\\RWN.lvl", "RWN_conquest")

    SetDenseEnvironment("false")

    --  Sound

    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)

    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

    OpenAudioStream("sound\\global.lvl",  "cw_music")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1")

    OpenAudioStream("sound\\yav.lvl",  "yav1_emt")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)

    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetOutOfBoundsVoiceOver(2, "cisleaving")

    SetOutOfBoundsVoiceOver(1, "repleaving")

    SetAmbientMusic(REP, 1.0, "rep_yav_amb_start",  0,1)

    SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)

    SetAmbientMusic(REP, 0.2, "rep_yav_amb_end",    2,1)

    SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start",  0,1)

    SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)

    SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_yav_amb_victory")

    SetDefeatMusic (REP, "rep_yav_amb_defeat")

    SetVictoryMusic(CIS, "cis_yav_amb_victory")

    SetDefeatMusic (CIS, "cis_yav_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",      "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut",     "binocularzoomout")

    --SetSoundEffect("BirdScatter",             "birdsFlySeq1")

    --SetSoundEffect("WeaponUnableSelect",      "com_weap_inf_weaponchange_null")

    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")

    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")

    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")

    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")

    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")

    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")

--OpeningSateliteShot

    AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

    AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);

    AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);

    AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);

    AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);

    AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);

    AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);

    AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);

    AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);

    AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);

end

... i then copied all of rep into...

C:\BF2_ModTools\data_RWN\_BUILD\Sides

... i then munged WITHOUT checking any boxes only changing Sides to rep...

when i play the map... it loads half way then CTD

any ideas on what i did wrong...

(P.S. With the default classes it works fine)

Posted: **Sat Aug 01, 2009 1:50 pm**

what did you copied into \_Build\sides ?

Posted: **Sat Aug 01, 2009 1:54 pm**

Executer94 wrote:what did you copied into \_Build\sides ?

i copied the edited rep folder from C:\BF2_ModTools\data_RWN\Sides

Posted: **Sat Aug 01, 2009 1:58 pm**

just remove it clean one time and munge your rep folder with visual munge.

Posted: **Sat Aug 01, 2009 1:59 pm**

I noticed you have this

Code: Select all

ReadDataFile("dc:SIDE\\cis.lvl",

Do you have a custom CIS side built, and have you munged it? Also, it would help if you posted your error log from bf2_modtools.exe.

Posted: **Sat Aug 01, 2009 2:23 pm**

Xavious wrote:I noticed you have this
Code: Select all
ReadDataFile("dc:SIDE\\cis.lvl",
Do you have a custom CIS side built, and have you munged it? Also, it would help if you posted your error log from bf2_modtools.exe.

No i do not have a custom side for the cis... should i remove the dc:??
and when i run BF2_modtools.exe it says.... it can't find binkw32.dll

Executer94 wrote:I noticed you have this

so... delete the rep folder in _BUILD/Sides and to a manual clean then munge...

Posted: **Sat Aug 01, 2009 2:32 pm**

RC-1309 wrote:
Xavious wrote:I noticed you have this
Code: Select all
ReadDataFile("dc:SIDE\\cis.lvl",
Do you have a custom CIS side built, and have you munged it? Also, it would help if you posted your error log from bf2_modtools.exe.
No i do not have a custom side for the cis... should i remove the dc:??
and when i run BF2_modtools.exe it says.... it can't find binkw32.dll

1. Yes, you should
2. The mod tools should be in Gamedata

Posted: **Sat Aug 01, 2009 2:36 pm**

C:\Program Files\LucasArts\Star Wars Battlefront II\GameData
in that directory there is not .exe file

and when you said yes... u meant to remove the dc:
or manual clean and remove rep then munge

Posted: **Sat Aug 01, 2009 2:38 pm**

RC-1309 wrote:C:\Program Files\LucasArts\Star Wars Battlefront II\GameData
in that directory there is not .exe file

and when you said yes... u meant to remove the dc:
or manual clean and remove rep then munge

1. Your BF2 modtools .exe MUST be there or it won't work

2. I meant yes to removing dc: and if that doesn't work do the manual clean

Posted: **Sat Aug 01, 2009 2:40 pm**

vegati wrote:
RC-1309 wrote:C:\Program Files\LucasArts\Star Wars Battlefront II\GameData
in that directory there is not .exe file

and when you said yes... u meant to remove the dc:
or manual clean and remove rep then munge
1. Your BF2 modtools .exe MUST be there or it won't work

2. I meant yes to removing dc: and if that doesn't work do the manual clean

C:\BF2_ModTools..
that is the only place with BF2_modtools and it doesn;t work

and should i delete the rep folder

Posted: **Sat Aug 01, 2009 2:43 pm**

No, you misunderstand me. There is a .exe inside of that folder. That is what you are to copy to Gamedata. It is called something along the lines of mod tools

Posted: **Sat Aug 01, 2009 2:43 pm**

Feel free to copy BF2_modtools.exe from there and paste it in the correct folder. That is what everyone else has done.

Or if you bothered to read the FAQ:

Question - I have the CD version of SWBF2 and I get a binkw32.dll error when trying to launch the BF2_modtools.exe, what's wrong?
Answer - Copy the BF2_modtools.exe from the main BF2_modtools folder and paste it in the same folder as your battlefront2.exe, usually:
\LucasArts\Star Wars Battlefront II\GameData

Posted: **Sat Aug 01, 2009 2:46 pm**

i have the DVD version and it says insert CD 1????

Posted: **Sat Aug 01, 2009 2:48 pm**

Please go to the FAQ and actually read the full question, it address that exact problem. This is why we have an FAQ, so people read it to answer frequently asked questions.

Posted: **Sat Aug 01, 2009 2:58 pm**

ok i got it... did it... put it in gamedata ran it.. the game opened up my map then i closed and nothing new happen... no new files

EDIT: i checked out this topic
http://www.gametoast.com/forums/viewtop ... 27&t=19759

and vegati... had answered a very similar question...

all i had to do was copy common to sides.....

really sorry for the trouble and time lost for you guys

-= Gametoast.com =-

CTD After Simple Color Reskin to Clone Trooper [Solved]

CTD After Simple Color Reskin to Clone Trooper [Solved]

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper

Re: CTD After Simple Color Resikin to Clone Trooper