Hello Gametoasters,
I adde jed_sith_01 to CIS on Coruscant but then my Darth Maul corrupted.
I removed the sith ,but Darth Maul is still corrupted.
He has suddenly a green double lightsaber and he runs odd.(Is odd the correct word?Sry my english isn´t so good
Can smd help me?

Look to your DarthMauls's odf for the weaponsection lines. Open the odf with his doublesaber and look which color the lightsaber reads. If it reads green, change it to "redlightsaber"+the RGB trail color.

thelegend wrote:Look to your DarthMauls's odf for the weaponsection lines. Open the odf with his doublesaber and look which color the lightsaber reads. If it reads green, change it to "redlightsaber"+the RGB trail color.

I took the assets Darth Maul but it is still green

ODF
EDIT

Now he has a red doublesaber but,he walks like he has a gun .

DrDrSheldonLeeCooper wrote:

thelegend wrote:Look to your DarthMauls's odf for the weaponsection lines. Open the odf with his doublesaber and look which color the lightsaber reads. If it reads green, change it to "redlightsaber"+the RGB trail color.

I took the assets Darth Maul but it is still green

ODF

Hidden/Spoiler:

[GameObjectClass]
ClassParent = "com_jedi_default"
GeometryName = "cis_inf_darthmaul.msh"

[Properties]
AISizeType = "hover"

ClothODF = "cis_inf_darthmaul_cape"
GeometryName = "cis_inf_darthmaul"
GeometryLowRes = "cis_inf_darthmaul_low1"
AnimationName = "maul"

JetJump = "10.0" //The initial jump-push given when enabling the jet
JetPush = "0.0" //The constant push given while the jet is enabled (20 is gravity)
JetAcceleration = "10.0" // for characters with jet jump, use this acceleration for in air control
JetEffect = ""
JetFuelRechargeRate = "0.0" //Additional fuel per second (fuel is 0 to 1)
JetFuelCost = "0.0" //Cost per second when hovering (only used for jet-hovers)(fuel is 0 to 1)
JetFuelInitialCost = "0.0" //4initial cost when jet jumping(fuel is 0 to 1)
JetFuelMinBorder = "0.0" //minimum fuel to perform a jet jump(fuel is 0 to 1)
JetShowHud = 0
JetEnergyDrain = 40.0

CollisionScale = "0.0 0.0 0.0" // don't take damage from collisions

WeaponName1 = "cis_weap_doublesaber"
WeaponAmmo1 = 0

WeaponName2 = "com_weap_inf_sabre_throw"
WeaponAmmo2 = 0
WeaponChannel2 = 1

WeaponName3 = "com_weap_inf_force_push"
WeaponAmmo3 = 0
WeaponChannel3 = 1

//SOUND
SndHeroSelectable = ""
SndHeroSpawned = "hero_maul_spawn"
SndHeroDefeated = "hero_maul_exhausted"
SndHeroKiller = "hero_maul_exhausted"

VOSound = "cis_off_response_hero_command SC_Follow"
VOSound = "cis_off_response_hero_command SC_StopFollow"
VOSound = "cis_off_response_hero_command SC_VehicleWaitUp"
VOSound = "cis_off_response_hero_command SC_GetIn"
VOSound = "cis_off_response_hero_command SC_GetOut"

VOSound = "hero_maul_AcquiredTarget AcquiredTarget"
VOSound = "hero_maul_KillingSpree4 KillingSpree4"

VOUnitType = 196
SoldierMusic = "cis_hero_Maul_lp"
HurtSound = ""
DeathSound = ""
AcquiredTargetSound = ""
HidingSound = ""
ApproachingTargetSound = ""
FleeSound = ""
PreparingForDamageSound = ""
HeardEnemySound = ""
//ShockFadeOutTime = "0.8"
//ShockFadeInTime = "2.0"
ShockFadeOutGain = ""
ShockSound = ""
ClothingRustleSound = ""
//LowHealthSound = "com_inf_saber_ambient"
LowHealthThreshold = "1.1"
FoleyFXClass = "cis_inf_soldier"

Did you check the "cis_weap_doublesaber" odf?

commanderawesome wrote:

DrDrSheldonLeeCooper wrote:

thelegend wrote:Look to your DarthMauls's odf for the weaponsection lines. Open the odf with his doublesaber and look which color the lightsaber reads. If it reads green, change it to "redlightsaber"+the RGB trail color.

I took the assets Darth Maul but it is still green

ODF

Hidden/Spoiler:

[GameObjectClass]
ClassParent = "com_jedi_default"
GeometryName = "cis_inf_darthmaul.msh"

[Properties]
AISizeType = "hover"

ClothODF = "cis_inf_darthmaul_cape"
GeometryName = "cis_inf_darthmaul"
GeometryLowRes = "cis_inf_darthmaul_low1"
AnimationName = "maul"

JetJump = "10.0" //The initial jump-push given when enabling the jet
JetPush = "0.0" //The constant push given while the jet is enabled (20 is gravity)
JetAcceleration = "10.0" // for characters with jet jump, use this acceleration for in air control
JetEffect = ""
JetFuelRechargeRate = "0.0" //Additional fuel per second (fuel is 0 to 1)
JetFuelCost = "0.0" //Cost per second when hovering (only used for jet-hovers)(fuel is 0 to 1)
JetFuelInitialCost = "0.0" //4initial cost when jet jumping(fuel is 0 to 1)
JetFuelMinBorder = "0.0" //minimum fuel to perform a jet jump(fuel is 0 to 1)
JetShowHud = 0
JetEnergyDrain = 40.0

CollisionScale = "0.0 0.0 0.0" // don't take damage from collisions

WeaponName1 = "cis_weap_doublesaber"
WeaponAmmo1 = 0

WeaponName2 = "com_weap_inf_sabre_throw"
WeaponAmmo2 = 0
WeaponChannel2 = 1

WeaponName3 = "com_weap_inf_force_push"
WeaponAmmo3 = 0
WeaponChannel3 = 1

//SOUND
SndHeroSelectable = ""
SndHeroSpawned = "hero_maul_spawn"
SndHeroDefeated = "hero_maul_exhausted"
SndHeroKiller = "hero_maul_exhausted"

VOSound = "cis_off_response_hero_command SC_Follow"
VOSound = "cis_off_response_hero_command SC_StopFollow"
VOSound = "cis_off_response_hero_command SC_VehicleWaitUp"
VOSound = "cis_off_response_hero_command SC_GetIn"
VOSound = "cis_off_response_hero_command SC_GetOut"

VOSound = "hero_maul_AcquiredTarget AcquiredTarget"
VOSound = "hero_maul_KillingSpree4 KillingSpree4"

VOUnitType = 196
SoldierMusic = "cis_hero_Maul_lp"
HurtSound = ""
DeathSound = ""
AcquiredTargetSound = ""
HidingSound = ""
ApproachingTargetSound = ""
FleeSound = ""
PreparingForDamageSound = ""
HeardEnemySound = ""
//ShockFadeOutTime = "0.8"
//ShockFadeInTime = "2.0"
ShockFadeOutGain = ""
ShockSound = ""
ClothingRustleSound = ""
//LowHealthSound = "com_inf_saber_ambient"
LowHealthThreshold = "1.1"
FoleyFXClass = "cis_inf_soldier"

Did you check the "cis_weap_doublesaber" odf?

now he has a red saber but he walks like he has a gun ;(
Edit
Now he walks normal

I cleaned now,you know darth maul has a combo and in the combo it looks like he want to kick smb in the face but after the kick the combo is ending.Normal Darth Maul beats with the saber after the kick

I hope u understand my english.

Look to his AnimationName. It should be "maul"..not "soldier".

Or look to the doublesaber/ lightsaber odf and look to this animation names.

Did you make sure this line is still there in mauls odf? And this line in the doublesaber odf? EDIT
Sorry, legend, I type slow.

commanderawesome wrote:Did you make sure this line is still there in mauls odf?

Code: Select all

AnimationName = "maul"

And this line in the doublesaber odf?

Code: Select all

ComboAnimationBank  = "human_sabre melee cis_hero_darthmaul"

EDIT
Sorry, legend, I type slow.

I think I have to remove Maul completly.
When I´m touching an Droideka with Maul, it explodes suddenly

DrDrSheldonLeeCooper wrote:

commanderawesome wrote:Did you make sure this line is still there in mauls odf?

Code: Select all

AnimationName = "maul"

And this line in the doublesaber odf?

Code: Select all

ComboAnimationBank  = "human_sabre melee cis_hero_darthmaul"

EDIT
Sorry, legend, I type slow.

I think I have to remove Maul completly.
When I´m touching an Droideka with Maul, it explodes suddenly

Can we see the maul and doublesaber ODF's?

commanderawesome wrote:

DrDrSheldonLeeCooper wrote:

commanderawesome wrote:Did you make sure this line is still there in mauls odf?

Code: Select all

AnimationName = "maul"

And this line in the doublesaber odf?

Code: Select all

ComboAnimationBank  = "human_sabre melee cis_hero_darthmaul"

EDIT
Sorry, legend, I type slow.

I think I have to remove Maul completly.
When I´m touching an Droideka with Maul, it explodes suddenly

Can we see the maul and doublesaber ODF's?

Maul

Saber

WeaponName = "cis_weap_lightsaber" >to> "cis_weap_inf_doublesabre".

thelegend wrote:WeaponName = "cis_weap_lightsaber" >to> "cis_weap_inf_doublesabre".

i just see com_weap_inf_lightsaber but this is the classparent

EDIT

now this happened : EDIT EDIT

I see that cis_weap_doublesaber is correct