-= Gametoast.com =-

Posted: **Wed May 26, 2010 5:34 pm**

i recently added the ai hero script but ingame it does not do anything here is my lua

Hidden/Spoiler:

--

-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.

--

-- load the gametype script

Conquest = ScriptCB_DoFile("ObjectiveConquest")

ScriptCB_DoFile("setup_teams") 

ScriptCB_DoFile("AIHeroSupport")

--  These variables do not change

ATT = 1

DEF = 2

--  Empire Attacking (attacker is always #1)

CIS = ATT

REP = DEF

SetMemoryPoolSize ("ClothData",20)

    SetMemoryPoolSize ("Combo",70)              -- should be ~ 2x number of jedi classes

    SetMemoryPoolSize ("Combo::State",850)      -- should be ~12x #Combo

    SetMemoryPoolSize ("Combo::Transition",850) -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Condition",850)  -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Attack",750)     -- should be ~8-12x #Combo

    SetMemoryPoolSize ("Combo::DamageSample",8000)  -- should be ~8-12x #Combo::Attack

    SetMemoryPoolSize ("Combo::Deflect",140)     -- should be ~1x #combo       -- should be ~1x #combo

 ---------------------------------------------------------------------------

 -- FUNCTION:    ScriptInit

 -- PURPOSE:     This function is only run once

 -- INPUT:

 -- OUTPUT:

 -- NOTES:       The name, 'ScriptInit' is a chosen convention, and each

 --              mission script must contain a version of this function, as

 --              it is called from C to start the mission.

 ---------------------------------------------------------------------------

function ScriptPostLoad()

	    AddDeathRegion("death")

	    AddDeathRegion("death1")

	    AddDeathRegion("death2")

	    AddDeathRegion("death3")

	    AddDeathRegion("death4")

    	SetProperty ("LibCase1","MaxHealth",1000)

    	SetProperty ("LibCase2","MaxHealth",1000)

    	SetProperty ("LibCase3","MaxHealth",1000)

    	SetProperty ("LibCase4","MaxHealth",1000)

    	SetProperty ("LibCase5","MaxHealth",1000)

    	SetProperty ("LibCase6","MaxHealth",1000)

    	SetProperty ("LibCase7","MaxHealth",1000)

    	SetProperty ("LibCase8","MaxHealth",1000)

    	SetProperty ("LibCase9","MaxHealth",1000)

    	SetProperty ("LibCase10","MaxHealth",1000)

    	SetProperty ("LibCase11","MaxHealth",1000)

    	SetProperty ("LibCase12","MaxHealth",1000)

    	SetProperty ("LibCase13","MaxHealth",1000)

    	SetProperty ("LibCase14","MaxHealth",1000)

    	SetProperty ("LibCase1","CurHealth",1000)

    	SetProperty ("LibCase2","CurHealth",1000)

    	SetProperty ("LibCase3","CurHealth",1000)

    	SetProperty ("LibCase4","CurHealth",1000)

    	SetProperty ("LibCase5","CurHealth",1000)

    	SetProperty ("LibCase6","CurHealth",1000)

    	SetProperty ("LibCase7","CurHealth",1000)

    	SetProperty ("LibCase8","CurHealth",1000)

    	SetProperty ("LibCase9","CurHealth",1000)

    	SetProperty ("LibCase10","CurHealth",1000)

    	SetProperty ("LibCase11","CurHealth",1000)

    	SetProperty ("LibCase12","CurHealth",1000)

    	SetProperty ("LibCase13","CurHealth",1000)

    	SetProperty ("LibCase14","CurHealth",1000)

    	EnableSPHeroRules()

    	DisableBarriers("SideDoor1")

        DisableBarriers("MainLibraryDoors")

        DisableBarriers("SideDoor2")

        DisableBarriers("SIdeDoor3")

        DisableBarriers("ComputerRoomDoor1")

        DisableBarriers("StarChamberDoor1")

        DisableBarriers("StarChamberDoor2")

        DisableBarriers("WarRoomDoor1")

        DisableBarriers("WarRoomDoor2")

        DisableBarriers("WarRoomDoor3") 

        PlayAnimation("DoorOpen01")

        PlayAnimation("DoorOpen02") 

                    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "cp1"}

    cp2 = CommandPost:New{name = "cp2"}

    cp3 = CommandPost:New{name = "cp3"}

    cp4 = CommandPost:New{name = "cp4"}

    cp5 = CommandPost:New{name = "cp5"}

    cp6 = CommandPost:New{name = "cp6"}

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)

    conquest:AddCommandPost(cp5)

    conquest:AddCommandPost(cp6)

    conquest:Start()

herosupport:AddSpawnCP("cp1","cp1")

    herosupport:AddSpawnCP("cp2","cp2")

    herosupport:AddSpawnCP("cp3","cp3")

    herosupport:AddSpawnCP("cp4","cp4")

herosupport:AddSpawnCP("cp5","cp5")

    herosupport:AddSpawnCP("cp6","cp6")

herosupport:Start()

 end

function ScriptInit()

    -- Designers, these two lines *MUST* be first.

    SetPS2ModelMemory(4056000)

    SetMapNorthAngle(180, 1)

    SetMaxFlyHeight(25)

    SetMaxPlayerFlyHeight (25)

    AISnipeSuitabilityDist(30)

    SetMemoryPoolSize("Music", 33)

    ReadDataFile("ingame.lvl")

    ReadDataFile("sound\\cor.lvl;cor1cw")

ReadDataFile("SIDE\\BFSM\\tur.lvl", 

    			"tur_bldg_laser")

    ReadDataFile("SIDE\\BFSM\\rep.lvl",

                "rep_inf_ep3_rifleman",

                "rep_inf_ep3_rocketeer",

                "rep_inf_ep3_engineer",

                "rep_inf_ep3_sniper", 

                "rep_inf_ep3_officer",

                "rep_inf_ep3_jettrooper",

		    "rep_inf_commando",

		    "rep_inf_clone_assassin",

		    "rep_inf_ep3_commander",

                "rep_hero_shaakti")

    ReadDataFile("SIDE\\BFSM\\501.lvl",

                "rep_inf_501_rifleman",

                "rep_inf_501_rocketeer",

                "rep_inf_501_engineer",

                "rep_inf_501_sniper", 

                "rep_inf_501_officer",

                "rep_inf_501_jettrooper",

				"rep_inf_501_commander")

    ReadDataFile("SIDE\\BFSM\\cis.lvl",

                "cis_inf_battledroid",

		    "cis_inf_assaultdroid",

                "cis_inf_engineer",

                "cis_inf_officer",

                "cis_inf_sniper",

                "cis_inf_droideka",

				"cis_inf_spy",

				"cis_inf_magnaguard",

				"cis_inf_commander",

                "cis_hero_zam")

    ReadDataFile("SIDE\\BFSM\\jungle.lvl",

                "cis_inf_kas_rifleman",

				"cis_inf_kas_rocketeer",

                "cis_inf_kas_sniper")

    ReadDataFile("SIDE\\rep.lvl",

    			"rep_fly_assault_dome",

    			"rep_fly_gunship_dome")

    ReadDataFile("SIDE\\cis.lvl",

    			"cis_fly_droidfighter_dome")

    SetupTeams{

        rep = {

            team = REP,

            units = 32,

            reinforcements = 300,

              soldier  = { "rep_inf_ep3_rifleman",16, 24},

              assault  = { "rep_inf_ep3_rocketeer",2, 5},

              engineer = { "rep_inf_ep3_engineer",2, 5},

              sniper   = { "rep_inf_ep3_sniper",2, 5},

              officer = {"rep_inf_ep3_officer",1, 4},

              special = { "rep_inf_clone_assassin",1, 4},

        },

        cis = {

            team = CIS,

            units = 32,

            reinforcements = 300,

            soldier  = { "cis_inf_battledroid",16, 24},

            assault  = { "cis_inf_assaultdroid",2, 5},

            engineer = { "cis_inf_engineer",2, 5},

            sniper   = { "cis_inf_sniper",2, 5},

            officer = {"cis_inf_officer",1, 4},

            special = { "cis_inf_spy",1, 4},

        }

     }

      AddUnitClass(REP, "rep_inf_ep3_jettrooper",1,2)

      AddUnitClass(REP, "rep_inf_commando",1,2)

      AddUnitClass(REP, "rep_inf_ep3_commander",0,1)

      AddUnitClass(CIS, "cis_inf_droideka",1,2)

      AddUnitClass(CIS, "cis_inf_magnaguard",1,2)

      AddUnitClass(CIS, "cis_inf_commander",0,1)

--  Level Stats

    ClearWalkers()

    AddWalkerType(0, 3) -- 8 droidekas (special case: 0 leg pairs)

    AddWalkerType(1, 0) -- 

    AddWalkerType(2, 0) -- 2 spider walkers with 2 leg pairs each

    AddWalkerType(3, 0) -- 2 attes with 3 leg pairs each

    local weaponCnt = 210

    SetMemoryPoolSize("Aimer", 22)

    SetMemoryPoolSize("AmmoCounter", weaponCnt)

    SetMemoryPoolSize("BaseHint", 250)

    SetMemoryPoolSize("EnergyBar", weaponCnt)

    SetMemoryPoolSize("EntityCloth", 18)

    SetMemoryPoolSize("EntitySoundStream", 10)

    SetMemoryPoolSize("EntitySoundStatic", 0)

    SetMemoryPoolSize("MountedTurret",12)

    SetMemoryPoolSize("PathFollower", 50)

    SetMemoryPoolSize("Navigator", 50)

    SetMemoryPoolSize("Obstacle", 375)

    SetMemoryPoolSize("SoundSpaceRegion", 38)

    SetMemoryPoolSize ("SoldierAnimation",700)

    SetMemoryPoolSize("TentacleSimulator", 0)

    SetMemoryPoolSize("TreeGridStack", 140)

    SetMemoryPoolSize("UnitAgent", 50)

    SetMemoryPoolSize("UnitController", 50)

    SetMemoryPoolSize("Weapon", weaponCnt)

	SetMemoryPoolSize("EntityFlyer", 4)   

    SetSpawnDelay(10.0, 0.25)

   ReadDataFile("cor\\cor1.lvl","cor1_Conquest")

    SetDenseEnvironment("True")

         -- SetMaxFlyHeight(25)

     --SetMaxPlayerFlyHeight (25)

 AddDeathRegion("DeathRegion1")

    --  Sound Stats

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)

    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

    OpenAudioStream("sound\\global.lvl",  "cw_music")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")

    OpenAudioStream("sound\\cor.lvl",  "cor1")

    OpenAudioStream("sound\\cor.lvl",  "cor1")

    -- OpenAudioStream("sound\\cor.lvl",  "cor1_emt")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)

    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetLowReinforcementsVoiceOver(REP, REP, "rep_off_defeat_im", .1, 1)

    SetLowReinforcementsVoiceOver(REP, CIS, "rep_off_victory_im", .1, 1)

    SetLowReinforcementsVoiceOver(CIS, CIS, "cis_off_defeat_im", .1, 1)

    SetLowReinforcementsVoiceOver(CIS, REP, "cis_off_victory_im", .1, 1)    

    SetOutOfBoundsVoiceOver(2, "Repleaving")

    SetOutOfBoundsVoiceOver(1, "Cisleaving")

    SetAmbientMusic(REP, 1.0, "rep_cor_amb_start",  0,1)

    SetAmbientMusic(REP, 0.8, "rep_cor_amb_middle", 1,1)

    SetAmbientMusic(REP, 0.2, "rep_cor_amb_end",    2,1)

    SetAmbientMusic(CIS, 1.0, "cis_cor_amb_start",  0,1)

    SetAmbientMusic(CIS, 0.8, "cis_cor_amb_middle", 1,1)

    SetAmbientMusic(CIS, 0.2, "cis_cor_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_cor_amb_victory")

    SetDefeatMusic (REP, "rep_cor_amb_defeat")

    SetVictoryMusic(CIS, "cis_cor_amb_victory")

    SetDefeatMusic (CIS, "cis_cor_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    --SetSoundEffect("WeaponUnableSelect",  "com_weap_inf_weaponchange_null")

    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")

    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")

    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")

    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")

    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")

    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")

    --  Camera Stats

    --Tat 1 - Dune Sea

	AddCameraShot(0.419938, 0.002235, -0.907537, 0.004830, -15.639358, 5.499980, -176.911179);

	AddCameraShot(0.994506, 0.104463, -0.006739, 0.000708, 1.745251, 5.499980, -118.700668);

	AddCameraShot(0.008929, -0.001103, -0.992423, -0.122538, 1.366768, 16.818106, -114.422173);

	AddCameraShot(0.761751, -0.117873, -0.629565, -0.097419, 59.861904, 16.818106, -81.607773);

	AddCameraShot(0.717110, -0.013583, 0.696703, 0.013197, 98.053314, 11.354497, -85.857857);

	AddCameraShot(0.360958, -0.001053, -0.932577, -0.002721, 69.017578, 18.145807, -56.992413);

	AddCameraShot(-0.385976, 0.014031, -0.921793, -0.033508, 93.111061, 18.145807, -20.164375);

	AddCameraShot(0.695468, -0.129569, -0.694823, -0.129448, 27.284357, 18.145807, -12.377695);

	AddCameraShot(0.009002, -0.000795, -0.996084, -0.087945, 1.931320, 13.356332, -16.410583);

	AddCameraShot(0.947720, -0.145318, 0.280814, 0.043058, 11.650738, 16.955814, 28.359180);

	AddCameraShot(0.686380, -0.127550, 0.703919, 0.130810, -30.096384, 11.152356, -63.235146);

	AddCameraShot(0.937945, -0.108408, 0.327224, 0.037821, -43.701199, 8.756138, -49.974789);

	AddCameraShot(0.531236, -0.079466, -0.834207, -0.124787, -62.491230, 10.305247, -120.102989);

	AddCameraShot(0.452286, -0.179031, -0.812390, -0.321572, -50.015198, 15.394646, -114.879379);

	AddCameraShot(0.927563, -0.243751, 0.273918, 0.071982, 26.149965, 26.947924, -46.834148);

herosupport = AIHeroSupport:New{AIATTHeroHealth = 5000,	AIDEFHeroHealth = 3000, gameMode = "conquest",minSpawnTime = 35,}

herosupport:SetHeroClass(REP, "rep_hero_shaakti")

herosupport:SetHeroClass(CIS, "cis_hero_zam")

end

Posted: **Wed May 26, 2010 5:41 pm**

you didnt add hero name line of which team :S and cp spawn are wrong i believe xD they must to be cp4_spawn or simil

Posted: **Wed May 26, 2010 6:00 pm**

? the names are at the end like they should be i think these are the names

--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}
cp5 = CommandPost:New{name = "cp5"}
cp6 = CommandPost:New{name = "cp6"}

Posted: **Wed May 26, 2010 6:07 pm**

@Skeltor - I would recommend against using the same name for spawns and cp's, as it gets a bit confusing, although it will probably work fine....

Also, did you remember to add the script to your mission.lua??? If its not there your script won't work.....

@ Dev - He can name it whatever he wants as long as thats what the cp's called. Also, he has the hero's called at the end of the lua, which is whats recommended for loading more then 6 units per side....

Posted: **Wed May 26, 2010 6:13 pm**

The names of your spawn paths are incorrect. Open the stock Coruscant .wld file up in ZE to get the correct names.

Posted: **Wed May 26, 2010 7:41 pm**

when i tried to open it up i got an error that says "config.ini" not found,unable to start. can somone post the names please?

-= Gametoast.com =-

AI heros not working

AI heros not working

Re: ai heros not working

Re: ai heros not working

Re: ai heros not working

Re: ai heros not working

Re: AI heros not working