-= Gametoast.com =-

Get more from your games!
http://www.gametoast.com/

mission-scripter.

http://www.gametoast.com/viewtopic.php?f=27&t=17442

Page 1 of 1

mission-scripter.

Posted: Wed Feb 18, 2009 12:46 pm
by ForceMaster
I have a problem using the mission-script. I am taking steps to make a simple objective are:

1) create a region in zeroeditor called "goto", properties "goto" and then save the map

2) I open the mission-script, press "Edit" and then ok to startsequence then click "load". loads the startsecuence.

3) Edit my objetive, put the information in popups and then the name of the region.

4) click "load current objective" and load objeive

5) click "edit" in endsequence then ok, then "load" and load the final sequence.

6) I will edit-export and export the lua script in my directory world. then munge.

The result? The display unit selection but when you click "spawn" is not the player. the unit not spawn.
I'm doing wrong? any tutorial for mission-scripter? thanks for the help in advance.

Re: mission-scripter.

Posted: Wed Feb 18, 2009 6:06 pm
by Master_Ben
Do the CP's appear on the minimap still?

Re: mission-scripter.

Posted: Thu Feb 19, 2009 12:00 pm
by ForceMaster
No, the cp's no appears in the minimap.

Re: mission-scripter.

Posted: Thu Feb 19, 2009 9:25 pm
by Master_Ben
Check to make sure the CP's are loaded in the LUA. I think mission-scripter does this, but I remember having troubles with this too.

Re: mission-scripter.

Posted: Thu Feb 19, 2009 10:48 pm
by Commander_Fett
loading the cps in the LUA don't matter, you only load them if you want them to be part of a conquest victory. I believe the map is having trouble loading the map's world file. did you use the missionscripter's script only? That's only part of the script you need for the map. you past that over the ScriptPostLoad section only.

Re: mission-scripter.

Posted: Fri Feb 20, 2009 12:10 pm
by ForceMaster
ok, this the LUA that i make whith the mission-scripter.
the first objetive is "go to the barricade" (the region is named "barricade")
the second objetive is "destroy the shield generator" (the object name is "crp_prop_shieldgenerator"
Hidden/Spoiler:
--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- This lua was createt by "Mission-Scripter", a program by -=[PfW]=-Skip.


-- load the gametype script
ScriptCB_DoFile("MultiObjectiveContainer")
ScriptCB_DoFile("ObjectiveAssault")
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("ObjectiveGoto")
ScriptCB_DoFile("ObjectiveCTF")
ScriptCB_DoFile("ObjectiveTDM")
ScriptCB_DoFile("Ambush")
ScriptCB_DoFile("setup_teams")

-- REP Attacking (attacker is always #1)
REP = 1;
CIS = 2;
-- These variables do not change
ATT = REP;
DEF = CIS;


function ScriptPostLoad()

SetAIDifficulty(0, 2, "hard")
AllowAISpawn(ATT, true)
AllowAISpawn(DEF, true)
EnableSPScriptedHeroes()
ScriptCB_SetGameRules("campaign")

onfirstspawn = OnCharacterSpawn(
function(character)
if character == 0 then
ShowPopup("level.geo1.hints.hints")
ReleaseCharacterSpawn(onfirstspawn)
onfirstspawn = nil
BeginObjectivesTimer()
ScriptCB_EnableCommandPostVO(0)

end
end)


--objective :goto
Objective1 = ObjectiveGoto:New{TeamATT = ATT, TeamDEF = DEF,
text = "ok", popupText = "Go to the barricade",
regionName = "barricade", mapIcon = "hud_objective_icon_circle", AIGoalWeight = 0}

Objective1:AddHint("level.geo1.hints.movement")
Objective1:AddHint("level.geo1.hints.obj_markers")
Objective1:AddHint("level.geo1.hints.review_objectives")
Objective1:AddHint("level.geo1.hints.sprint")


Objective1.OnStart = function(self)
att_obj1_aigoal = AddAIGoal(ATT, "Deathmatch", 100)
def_obj1_aigoal = AddAIGoal(DEF, "Deathmatch", 100)

end

Objective1.OnComplete = function(self)
DeleteAIGoal(att_obj1_aigoal)
DeleteAIGoal(def_obj1_aigoal)
ShowMessageText("game.objectives.complete", ATT)

end



--objective: assault
Dobjekt = Target:New{name = "crp_prop_shieldgenerator"}
Dobjekt.OnDestroy = function(self)

end

Objective2 = ObjectiveAssault:New{teamATT = ATT, teamDEF = DEF,
text = "Destroy the shield generator", popupText = "Destroy the shield generator"}
Objective2:AddTarget(Dobjekt)


Objective2.OnStart = function(self)


end

Objective2.OnComplete = function(self)
ShowMessageText("game.objectives.complete", ATT)

end



end



function BeginObjectivesTimer()
beginobjectivestimer = CreateTimer("beginobjectivestimer")
OnTimerElapse(BeginObjectives, beginobjectivestimer)
SetTimerValue(beginobjectivestimer, 3)
StartTimer(beginobjectivestimer)
end

function BeginObjectives()
objectiveSequence = MultiObjectiveContainer:New{delayVictoryTime = 4}
objectiveSequence:AddObjectiveSet(Objective1)
objectiveSequence:AddObjectiveSet(Objective2)

objectiveSequence:Start()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(30)
SetMaxPlayerFlyHeight (30)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_darthmaul",
"cis_hover_aat")


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 20,
reinforcements = 150,
soldier = { "cis_inf_rifleman",9, 25},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}

SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_anakin")


-- Level Stats
-- ClearWalkers()
AddWalkerType(0, 4) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)
local weaponCnt = 1024
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 32)
SetMemoryPoolSize("EntityFlyer", 32)
SetMemoryPoolSize("EntityHover", 32)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 32)
SetMemoryPoolSize("MountedTurret", 32)
SetMemoryPoolSize("Navigator", 128)
SetMemoryPoolSize("Obstacle", 1024)
SetMemoryPoolSize("PathNode", 1024)
SetMemoryPoolSize("SoundSpaceRegion", 64)
SetMemoryPoolSize("TreeGridStack", 1024)
SetMemoryPoolSize("UnitAgent", 128)
SetMemoryPoolSize("UnitController", 128)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:CRP\\CRP.lvl", "CRP_con")
ReadDataFile("dc:CRP\\CRP.lvl", "CRP_con")
SetDenseEnvironment("false")




-- Sound

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

OpenAudioStream("sound\\global.lvl", "cw_music")
-- OpenAudioStream("sound\\global.lvl", "global_vo_quick")
-- OpenAudioStream("sound\\global.lvl", "global_vo_slow")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1_emt")

SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)
SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

SetOutOfBoundsVoiceOver(2, "cisleaving")
SetOutOfBoundsVoiceOver(1, "repleaving")

SetAmbientMusic(REP, 1.0, "rep_yav_amb_start", 0,1)
SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
SetAmbientMusic(REP, 0.2, "rep_yav_amb_end", 2,1)
SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start", 0,1)
SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end", 2,1)

SetVictoryMusic(REP, "rep_yav_amb_victory")
SetDefeatMusic (REP, "rep_yav_amb_defeat")
SetVictoryMusic(CIS, "cis_yav_amb_victory")
SetDefeatMusic (CIS, "cis_yav_amb_defeat")

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")
--SetSoundEffect("BirdScatter", "birdsFlySeq1")
--SetSoundEffect("WeaponUnableSelect", "com_weap_inf_weaponchange_null")
--SetSoundEffect("WeaponModeUnableSelect", "com_weap_inf_modechange_null")
SetSoundEffect("SpawnDisplayUnitChange", "shell_select_unit")
SetSoundEffect("SpawnDisplayUnitAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplayBack", "shell_menu_exit")


--OpeningSateliteShot
AddCameraShot(0.908386, -0.209095, -0.352873, -0.081226, -45.922508, -19.114113, 77.022636);

AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);
AddCameraShot(0.999914, -0.012495, -0.004416, -0.000055, 1.143253, -33.602314, -76.884430);
AddCameraShot(0.839161, 0.012048, -0.543698, 0.007806, 19.152437, -49.802273, 24.337317);
AddCameraShot(0.467324, 0.006709, -0.883972, 0.012691, 11.825212, -49.802273, -7.000720);
AddCameraShot(0.861797, 0.001786, -0.507253, 0.001051, -11.986043, -59.702248, 23.263165);
AddCameraShot(0.628546, -0.042609, -0.774831, -0.052525, 20.429928, -48.302277, 9.771714);
AddCameraShot(0.765213, -0.051873, 0.640215, 0.043400, 57.692474, -48.302277, 16.540724);
AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);
AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);
end
I can't see the CP's in this LUA. How to add ?

Re: mission-scripter.

Posted: Fri Feb 20, 2009 7:28 pm
by ThePanda
Change

Code: Select all

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:CRP\\CRP.lvl", "CRP_con")
ReadDataFile("dc:CRP\\CRP.lvl", "CRP_con")
SetDenseEnvironment("false")
To

Code: Select all

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:CRP\\CRP.lvl", "CRP_conquest")
ReadDataFile("dc:CRP\\CRP.lvl", "CRP_conquest")
SetDenseEnvironment("false")

Re: mission-scripter.

Posted: Sat Feb 21, 2009 7:45 pm
by ForceMaster
Works!!!! thank you!

i add this lines in the lua.
Hidden/Spoiler:
function ScriptPostLoad()

--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}
cp4 = CommandPost:New{name = "cp5"}
the CPs appears in the map and the world.

another question:

mission scripter can make a objetive "capture the flag"?

Re: mission-scripter.

Posted: Tue Feb 24, 2009 11:54 pm
by Sky_216
No...it can't make Capture flag. Have to make it yourself.
All times are UTC-04:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited