Page 1 of 1
Water Problems
Posted: Tue Jul 21, 2009 9:12 am
by FOOLIS
I added water to my map but something is wrong.
It looks like this ingame :
Some parts of the water disappear from time to time(2) or they get another texture/colour(1)
Thanks
Re: Water Problems
Posted: Tue Jul 21, 2009 9:15 am
by Xavious
What height is your ground in relation to the water? They shouldn't be at exactly the same height.
Re: Water Problems
Posted: Tue Jul 21, 2009 9:17 am
by FOOLIS
The water is higher than the ground
Re: Water Problems
Posted: Tue Jul 21, 2009 9:18 am
by Xavious
How much higher? It looks like the ground is peeking up through the water in your pic.
Re: Water Problems
Posted: Tue Jul 21, 2009 10:19 am
by MandeRek
To me it looks like water 'tiles' are overlapping each other, or not connected to each other.. But I think that is basicly impossible..
Re: Water Problems
Posted: Wed Jul 22, 2009 9:35 am
by FOOLIS
It worked all the time but suddenly these strange problems appeared.
Re: Water Problems
Posted: Wed Jul 22, 2009 10:36 am
by obiboba3po
yea i don't think the water can over-lap. can you notice the water "bobbing" or moving up and down so-to-speak? i know in ZE there's a parameter to control that, so even if you place it above ground level its probably still possible for it at a point to be higher or lower than what you intend it to be.
you could also for the sake of trial and error remove all water and try replacing it all.
Re: Water Problems
Posted: Wed Jul 22, 2009 4:57 pm
by FOOLIS
I haven´t changed anything on that paramater
I already replaced the water but its still the same -.-
