-= Gametoast.com =-

Ok, so I was trying to get my new unit, cge_inf_clonecommander to appear ingame. Becasue I wanted more than 5 units, I added it in just like Caleb1117 has shown here in his tutorial:

http://i96.photobucket.com/albums/l193/ ... /tut11.jpg

(I had some problems, just cpoy the url to see)

Anyway, I munged my map, but now, not only does the unit not appear, but the map is gone as well. All you get to see is a black backround with units in the unit selection screen, and you are not allowed to spawn. I have a feeling it is tied into my LUA script as that is where I was changing things. here it is: Also here is a message severity 3 from my BFront2 Log Errors:
If you need anymore information to help me solve this problem, just ask.

Any help would be appreciated.

agzilla123 wrote:

Hidden/Spoiler:

--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams")

---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------

function ScriptPostLoad()
AddAIGoal(3, "Deathmatch", 100)
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}
cp3 = CommandPost:New{name = "cp3"}
cp4 = CommandPost:New{name = "cp4"}
cp6 = CommandPost:New{name = "cp6"}
cp7 = CommandPost:New{name = "cp7"}
cp8 = CommandPost:New{name = "cp8"}

--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, text = "level.geo1.objectives.conquest", multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)
conquest:AddCommandPost(cp3)
conquest:AddCommandPost(cp4)
conquest:AddCommandPost(cp6)
conquest:AddCommandPost(cp7)
conquest:AddCommandPost(cp8)

conquest:Start()

EnableSPHeroRules()

AddDeathRegion("deathregion")
AddDeathRegion("deathregion2")
AddDeathRegion("deathregion3")
AddDeathRegion("deathregion4")
AddDeathRegion("deathregion5")

end
function ScriptInit()
StealArtistHeap(800*1024)
-- Designers, these two lines *MUST* be first.
SetPS2ModelMemory(3500000)
ReadDataFile("ingame.lvl")

-- REP Attacking (attacker is always #1)
local REP = 1
local CIS = 2
-- These variables do not change
local ATT = 1
local DEF = 2

SetTeamAggressiveness(CIS, 1.0)
SetTeamAggressiveness(REP, 1.0)

SetMemoryPoolSize("Music", 40)

ReadDataFile("sound\\geo.lvl;geo1cw")
ReadDataFile("SIDE\\rep.lvl",
--"rep_bldg_forwardcenter",
"rep_fly_assault_dome",
--"rep_fly_gunship",
"rep_fly_gunship_dome",
"rep_fly_jedifighter_dome",
"rep_inf_ep2_rocketeer",
"rep_inf_ep2_rifleman",
"rep_inf_ep2_jettrooper",
"rep_inf_ep2_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep2_engineer",
"rep_hero_macewindu",
"rep_walk_atte")

ReadDataFile("SIDE\\cis.lvl",
"cis_fly_droidfighter_dome",
--"cis_fly_geofighter",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_engineer",
"cis_hero_countdooku",
"cis_inf_droideka",
"cis_tread_hailfire",
--"cis_hover_stap",
"cis_walk_spider")

ReadDataFile("dc:SIDE\\cge.lvl",
"cge_inf_battledroid",
"cge_inf_pilotdroid",
"cge_inf_securitydroid",
"cge_inf_clonetrooper",
"cge_inf_clonesergant",
"cge_inf_clonelieutenant",
"cge_inf_clonecaptain",
"cge_inf_clonecommander")

ReadDataFile("SIDE\\geo.lvl",
"gen_inf_geonosian")

ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_geoturret")

-- Level Stats

ClearWalkers()
SetMemoryPoolSize("EntityWalker", -1)
AddWalkerType(0, 3) -- 8 droidekas (special case: 0 leg pairs)
AddWalkerType(2, 3) -- 2 spider walkers with 2 leg pairs each
AddWalkerType(3, 0) -- 2 attes with 3 leg pairs each
local weaponcnt = 240
SetMemoryPoolSize("Aimer", 50)
SetMemoryPoolSize("AmmoCounter", weaponcnt)
SetMemoryPoolSize("BaseHint", 100)
SetMemoryPoolSize("CommandWalker", 1)
SetMemoryPoolSize("EnergyBar", weaponcnt)
SetMemoryPoolSize("EntityFlyer", 6)
SetMemoryPoolSize("EntityHover", 9)
SetMemoryPoolSize("EntityLight", 50)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("MountedTurret", 10)
SetMemoryPoolSize("Navigator", 50)
SetMemoryPoolSize("Obstacle", 450)
SetMemoryPoolSize("PathFollower", 50)
SetMemoryPoolSize("PathNode", 100)
SetMemoryPoolSize("TreeGridStack", 300)
SetMemoryPoolSize("UnitAgent", 50)
SetMemoryPoolSize("UnitController", 50)
SetMemoryPoolSize("Weapon", weaponcnt)

SetSpawnDelay(10.0, 0.25)

SetupTeams{

rep = {
team = REP,
units = 28,
reinforcements = 150,
soldier = { "cge_inf_clonetrooper",10, 25},
assault = { "cge_inf_clonesergant",1, 4},
engineer = { "cge_inf_clonelieutenant",1, 4},
sniper = { "cge_inf_clonecaptain",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep2_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 28,
reinforcements = 150,
soldier = { "cge_inf_battledroid",10, 25},
assault = { "cge_inf_pilotdroid",1, 4},
engineer = { "cge_inf_securitydroid",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},

}
}


AddUnitClass(CGE, "cge_inf_clonecommander",1,4)

The part I marked red is the team the unit will be added ingame. So in this case it should be

Well Aman/Pinguin, I fixed that, and now the map is back to normal, thanks.

But the Unit still does not appear. My error log is not showing anything out of the ordinary, like message severity 3's. I could run through it to see if there is a problem there, but my experience tells me that the log will not tell me the problems. What should i do form here?

Any help would be appreciated.

The error says it has a problem with your CPs. Check in ZE and make sure you do have CPs 1 through 4 and 6 through 8.

Your suggestion is a bit confusing [RDH]Zerted. Let me clarify.

My map is working again, I am just having a problem with my unit not appearing. The log you were looking at is now old, and the problem was solved.

I am just letting you know, because your suggestion sounds a bit off with my problem. however, if you still think that I should check ZE regardless of this information, please tell me and I am sorry for questioning.

Any help would be appreciated.

agzilla123 wrote:Your suggestion is a bit confusing [RDH]Zerted

Your partly solved post was four minutes before mine. I just didn't notice it. You can always post the full log.

Are you sure [RDH]Zerted, because it will contain a lot of those pointless error messages that don't really mean anything. If you want me to post the whole thing I can, or do you want me to sift through and only find the errors that actually mean anything?

Well, you shouldn't have any soldier memory pool errors. Those are easy to fix... If you can't thnk of any other problems/solutions, then yes I would recommend posting the entire log. Its easy to cut something out you don't understand that might be important. It also gives people looking at it the full picture and helps reduce their questions.