-= Gametoast.com =-

Get more from your games!
http://www.gametoast.com/

Problems with reading lvl

http://www.gametoast.com/viewtopic.php?f=27&t=21178

Page 1 of 1

Problems with reading lvl

Posted: Thu Nov 12, 2009 12:39 pm
by [Skirata]Darman[M]
Hey guys, when I start my map there is shown nothing, and I can't spawn.
Errorlog sais:
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LoadUtil.cpp(1010)
Data in C:\Programme\LucasArts\Star Wars Battlefront II\GameData\AddOn\RYO\Data\_lvl_pc\RYO\RYO.lvl is not a binary UCF file.

Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LoadUtil.cpp(829)
Unable to find level chunk RYO_conquest in C:\Programme\LucasArts\Star Wars Battlefront II\GameData\AddOn\RYO\Data\_lvl_pc\RYO\RYO.lvl


Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LoadUtil.cpp(1019)
Unable to find level chunk in dc:RYO\RYO.lvl
and
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LuaHelper.cpp(312)
CallProc failed: (none):0: attempt to perform arithmetic on a nil value
stack traceback:
(none): in function `AddCommandPost'
(none): in function `ScriptPostLoad'
do you know how to slove this problem?

Now I made everything new but it's always the same, now this is shown up:
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LuaHelper.cpp(312)
CallProc failed: (none):0: attempt to compare two nil values
stack traceback:
(none): in function `ifs_login_EnterInterface'
(none): in function <(none):598>

ifs_saveop_DoOps LoadProfile
ifs_saveop_DoOps LoadProfile

Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LuaHelper.cpp(312)
CallProc failed: (none):0: attempt to compare two nil values
stack traceback:
(none): in function `ifs_login_EnterInterface'
(none): in function <(none):598>

ifs_sp_campaign: Input_Accept(): Entered: [Nil]
ifs_sp_campaign: Input_Accept(): Entered: _tab_instant
missionlist_ExpandMapList()
ifs_missionselect_pcMulti_fnSetMapPreview(): Defaulting index to 1
ifs_missionselect_pcMulti_fnSetMapPreview(): Stored movie name, file: preview-loop MOVIES\pre-movie
this.CurButton = nil
cur_button = nil
custom_CheckChangeMovies(): Update(): Time to change movies
ifs_missionselect_pcMulti_ChangeMovieFile(): MovieFile: nil
ifs_missionselect_pcMulti_ChangeMovieFile(): Closed any open movie
ifs_missionselect_pcMulti_ChangeMovieFile(): Opening movie: MOVIES\pre-movie.mvs
ifs_missionselect_pcMulti_ChangeMovieFile(): Finished opening movie
this.CurButton = check_mode1
cur_button = nil
Checkbox for check_era3 clicked
this.CurButton = check_era3
cur_button = nil
custom_AddMapNew()
custom_printTable(): table: 03CE130C
The key, value is: era_c 1
The key, value is: era_g 1
The key, value is: mode_con_c 1
The key is mapluafile, the formated value is: RYO<A>_<B>
The key, value is: mode_con_g 1
The key, value is: bSelected 1
The key, value is: isModLevel 1
custom_printTable(): Returning
custom_printTable(): table: 03CE672C
The key, value is: key mode_con
The key, value is: subst con
The key, value is: showstr modename.name.con
The key, value is: descstr modename.description.con
The key, value is: icon mode_icon_con
custom_printTable(): Returning
gMapEras.key = era_c Era = era_c subst = c
Adding map: RYOc_con idx: 1
this.CurButton = _map_add
cur_button = nil
this.CurButton = Launch
cur_button = nil


Nothing else

Re: Problems with reading lvl

Posted: Thu Nov 12, 2009 2:20 pm
by DarthD.U.C.K.
yes, visualmunge cant find your luas lvl file because its unable to create one due a fault in its code, can you post the lua please?

Re: Problems with reading lvl

Posted: Thu Nov 12, 2009 4:16 pm
by Xavious
DarthD.U.C.K. wrote:can you post the lua please?
You should also point out your most recent changes to your lua (between the time you had a working map and it started crashing) when you post it, so the rest of us have an easier time identifying what went wrong.

Re: Problems with reading lvl

Posted: Thu Nov 12, 2009 6:11 pm
by giftheck
[Skirata]Darman[M] wrote:
Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LoadUtil.cpp(1010)
Data in C:\Programme\LucasArts\Star Wars Battlefront II\GameData\AddOn\RYO\Data\_lvl_pc\RYO\RYO.lvl is not a binary UCF file.

Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LoadUtil.cpp(829)
Unable to find level chunk RYO_conquest in C:\Programme\LucasArts\Star Wars Battlefront II\GameData\AddOn\RYO\Data\_lvl_pc\RYO\RYO.lvl


Message Severity: 3
C:\Battlefront2\main\Battlefront2\Source\LoadUtil.cpp(1019)
Unable to find level chunk in dc:RYO\RYO.lvl
I've had this error with sides LVLs as well. As it is said, it's probably a fault in the visualmunge exe.

Re: Problems with reading lvl

Posted: Fri Nov 13, 2009 12:41 am
by Maveritchell
ggctuk wrote:I've had this error with sides LVLs as well. As it is said, it's probably a fault in the visualmunge exe.
It's not a fault in Visual Munge, that was never said:
yes, visualmunge cant find your luas lvl file because its unable to create one due a fault in its code, can you post the lua please?
DarthD.U.C.K. is referring to a problem in the .lua code.

Re: Problems with reading lvl

Posted: Fri Nov 13, 2009 4:09 am
by [Skirata]Darman[M]
Here's the lua con_c:
Hidden/Spoiler:
--
-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.
--

-- load the gametype script
ScriptCB_DoFile("ObjectiveConquest")
ScriptCB_DoFile("setup_teams")

-- REP Attacking (attacker is always #1)
REP = 1;
CIS = 2;
-- These variables do not change
ATT = REP;
DEF = CIS;


function ScriptPostLoad()


--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp4 = CommandPost:New{name = "cp4"}



--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp4)

conquest:Start()

EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(30)
SetMaxPlayerFlyHeight (30)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_darthmaul",
"cis_hover_aat")


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 20,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 25},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 20,
reinforcements = 150,
soldier = { "cis_inf_rifleman",9, 25},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}

SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_anakin")


-- Level Stats
-- ClearWalkers()
AddWalkerType(0, 4) -- special -> droidekas
AddWalkerType(1, 0) -- 1x2 (1 pair of legs)
AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)
AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)
local weaponCnt = 1024
SetMemoryPoolSize("Aimer", 75)
SetMemoryPoolSize("AmmoCounter", weaponCnt)
SetMemoryPoolSize("BaseHint", 1024)
SetMemoryPoolSize("EnergyBar", weaponCnt)
SetMemoryPoolSize("EntityCloth", 32)
SetMemoryPoolSize("EntityFlyer", 32)
SetMemoryPoolSize("EntityHover", 32)
SetMemoryPoolSize("EntityLight", 200)
SetMemoryPoolSize("EntitySoundStream", 4)
SetMemoryPoolSize("EntitySoundStatic", 32)
SetMemoryPoolSize("MountedTurret", 32)
SetMemoryPoolSize("Navigator", 128)
SetMemoryPoolSize("Obstacle", 1024)
SetMemoryPoolSize("PathNode", 1024)
SetMemoryPoolSize("SoundSpaceRegion", 64)
SetMemoryPoolSize("TreeGridStack", 1024)
SetMemoryPoolSize("UnitAgent", 128)
SetMemoryPoolSize("UnitController", 128)
SetMemoryPoolSize("Weapon", weaponCnt)

SetSpawnDelay(10.0, 0.25)
--ReadDataFile("dc:RYO\\RYO.lvl", "RYO_conquest")
ReadDataFile("dc:RYO\\RYO.lvl", "RYO_conquest")
SetDenseEnvironment("false")




-- Sound

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)
AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")
AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

OpenAudioStream("sound\\global.lvl", "cw_music")
-- OpenAudioStream("sound\\global.lvl", "global_vo_quick")
-- OpenAudioStream("sound\\global.lvl", "global_vo_slow")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1")
OpenAudioStream("sound\\yav.lvl", "yav1_emt")

SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)
SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing", 1)
SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

SetOutOfBoundsVoiceOver(2, "cisleaving")
SetOutOfBoundsVoiceOver(1, "repleaving")

SetAmbientMusic(REP, 1.0, "rep_yav_amb_start", 0,1)
SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
SetAmbientMusic(REP, 0.2, "rep_yav_amb_end", 2,1)
SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start", 0,1)
SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end", 2,1)

SetVictoryMusic(REP, "rep_yav_amb_victory")
SetDefeatMusic (REP, "rep_yav_amb_defeat")
SetVictoryMusic(CIS, "cis_yav_amb_victory")
SetDefeatMusic (CIS, "cis_yav_amb_defeat")

SetSoundEffect("ScopeDisplayZoomIn", "binocularzoomin")
SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")
--SetSoundEffect("BirdScatter", "birdsFlySeq1")
--SetSoundEffect("WeaponUnableSelect", "com_weap_inf_weaponchange_null")
--SetSoundEffect("WeaponModeUnableSelect", "com_weap_inf_modechange_null")
SetSoundEffect("SpawnDisplayUnitChange", "shell_select_unit")
SetSoundEffect("SpawnDisplayUnitAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")
SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")
SetSoundEffect("SpawnDisplayBack", "shell_menu_exit")


--OpeningSateliteShot
AddCameraShot(-0.481173, 0.024248, -0.875181, -0.044103, 14.767292, -30.602322, -144.506851);
AddCameraShot(0.264032, -0.015285, -0.962782, -0.055734, -16.681797, -42.902290, 129.553268);
AddCameraShot(-0.382320, 0.022132, -0.922222, -0.053386, 20.670977, -42.902290, 135.513001);
end
All times are UTC-04:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited