What causes the rain sound on Kamino? [Solved]

yuke5 · Post by **yuke5** » Tue Sep 06, 2011 2:10 am

I've been looking through the kamino lua to find the command that loads the rain sound. I've tried the open audio stream but that doesn't seem to work. I tried using amb music but that just caused there to be no music. What am I supposed to do?

My lua:

Hidden/Spoiler:

--

-- Copyright (c) 2005 Pandemic Studios, LLC. All rights reserved.

--

-- load the gametype script

ScriptCB_DoFile("ObjectiveConquest")

ScriptCB_DoFile("setup_teams")

ScriptCB_DoFile("AIHeroSupport")

	--  REP Attacking (attacker is always #1)

    REP = 1;

    CIS = 2;

    --  These variables do not change

    ATT = REP;

    DEF = CIS;

function ScriptPostLoad() 

    --This defines the CPs.  These need to happen first

    cp1 = CommandPost:New{name = "cp1"}

    cp2 = CommandPost:New{name = "cp2"}

    cp3 = CommandPost:New{name = "cp3"}

    cp4 = CommandPost:New{name = "cp4"}

	cp5 = CommandPost:New{name = "cp5"}

    --This sets up the actual objective.  This needs to happen after cp's are defined

    conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF, 

                                     textATT = "game.modes.con", 

                                     textDEF = "game.modes.con2",

                                     multiplayerRules = true}

    --This adds the CPs to the objective.  This needs to happen after the objective is set up

    conquest:AddCommandPost(cp1)

    conquest:AddCommandPost(cp2)

    conquest:AddCommandPost(cp3)

    conquest:AddCommandPost(cp4)

	conquest:AddCommandPost(cp5)

    conquest:Start()

	herosupport = AIHeroSupport:New{AIATTHeroHealth = 2500, AIDEFHeroHealth = 3000, gameMode = "conquest",}

	herosupport:SetHeroClass(REP, "rep_hero_yoda")

	herosupport:SetHeroClass(CIS, "cis_hero_grievous")

	herosupport:AddSpawnCP("cp1","cp1_spawn")

	herosupport:AddSpawnCP("cp2","cp2_spawn")

	herosupport:AddSpawnCP("cp3","cp3_spawn")	

	herosupport:AddSpawnCP("cp4","cp4_spawn")

	herosupport:AddSpawnCP("cp5","cp5_spawn")

	herosupport:Start()

end

---------------------------------------------------------------------------

-- FUNCTION:    ScriptInit

-- PURPOSE:     This function is only run once

-- INPUT:

-- OUTPUT:

-- NOTES:       The name, 'ScriptInit' is a chosen convention, and each

--              mission script must contain a version of this function, as

--              it is called from C to start the mission.

---------------------------------------------------------------------------

function ScriptInit()

    ReadDataFile("ingame.lvl")

    SetMaxFlyHeight(60)

    SetMaxPlayerFlyHeight(60)

    SetMemoryPoolSize ("ClothData",20)

    SetMemoryPoolSize ("Combo",50)              -- should be ~ 2x number of jedi classes

    SetMemoryPoolSize ("Combo::State",650)      -- should be ~12x #Combo

    SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Condition",650)  -- should be a bit bigger than #Combo::State

    SetMemoryPoolSize ("Combo::Attack",550)     -- should be ~8-12x #Combo

    SetMemoryPoolSize ("Combo::DamageSample",6000)  -- should be ~8-12x #Combo::Attack

    SetMemoryPoolSize ("Combo::Deflect",100)     -- should be ~1x #combo  

    ReadDataFile("sound\\kam.lvl;kam1gcw")

    ReadDataFile("sound\\yav.lvl;yav1cw")

	ReadDataFile("dc:Sound\\bx_sound.lvl")

	    ReadDataFile("SIDE\\all.lvl",

                    "all_inf_wookiee")

	ReadDataFile("dc:SIDE\\wok.lvl",

							"wok_inf_basic")

    ReadDataFile("dc:SIDE\\rep.lvl",

                             "rep_inf_ep3_rifleman",

                             "rep_inf_ep3_rocketeer",

                             "rep_inf_ep3_engineer",

                             "rep_inf_ep3_sniper",

                             "rep_inf_ep3_officer",

                             "rep_inf_ep3_jettrooper",

                             "rep_hover_fightertank",

                             "rep_hero_yoda",

                             "rep_hover_barcspeeder")

	ReadDataFile("dc:SIDE\\cis.lvl",

                             "cis_inf_rifleman",

                             "cis_inf_rocketeer",

                             "cis_inf_engineer",

                             "cis_inf_sniper",

                             "cis_inf_officer",

                             "cis_inf_droideka",

                             "cis_hero_grievous",

                             "cis_hover_aat" )

	SetupTeams{

		rep = {

			team = REP,

			units = 20,

			reinforcements = 150,

			soldier  = { "rep_inf_ep3_rifleman",9, 25},

			assault  = { "rep_inf_ep3_rocketeer",1, 4},

			engineer = { "rep_inf_ep3_engineer",1, 4},

			sniper   = { "rep_inf_ep3_sniper",1, 4},

			officer = {"rep_inf_ep3_officer",1, 4},

			special = { "all_inf_wookiee",1, 4},

		},

		cis = {

			team = CIS,

			units = 20,

			reinforcements = 150,

			soldier  = { "cis_inf_rifleman",9, 25},

			assault  = { "cis_inf_rocketeer",1, 4},

			engineer = { "cis_inf_engineer",1, 4},

			sniper   = { "cis_inf_sniper",1, 4},

			officer = {"cis_inf_officer",1, 4},

			special = { "cis_inf_droideka",1, 4},

		},

	}

	SetTeamName(3, "wookiees")

	AddUnitClass(3, "wok_inf_mechanic", 10, 15)

	SetUnitCount(3, 15)

	AddAIGoal(3, "Deathmatch", 100)

	SetTeamAsFriend(ATT,3)

    SetTeamAsFriend(3,ATT)

    SetTeamAsFriend(DEF,3)

    SetTeamAsFriend(3,DEF)

	--SetHeroClass(CIS, "cis_inf_grievous")

	--SetHeroClass(REP,"rep_inf_yoda")

    --  Level Stats

    --  ClearWalkers()

    AddWalkerType(0, 4) -- special -> droidekas

    AddWalkerType(1, 0) -- 1x2 (1 pair of legs)

    AddWalkerType(2, 0) -- 2x2 (2 pairs of legs)

    AddWalkerType(3, 0) -- 3x2 (3 pairs of legs)

    local weaponCnt = 1024

    SetMemoryPoolSize("Aimer", 75)

    SetMemoryPoolSize("AmmoCounter", weaponCnt)

    SetMemoryPoolSize("BaseHint", 1024)

    SetMemoryPoolSize("EnergyBar", weaponCnt)

	SetMemoryPoolSize("EntityCloth", 32)

	SetMemoryPoolSize("EntityFlyer", 32)

    SetMemoryPoolSize("EntityHover", 32)

    SetMemoryPoolSize("EntityLight", 200)

    SetMemoryPoolSize("EntitySoundStream", 4)

    SetMemoryPoolSize("EntitySoundStatic", 32)

    SetMemoryPoolSize("MountedTurret", 32)

	SetMemoryPoolSize("Navigator", 128)

    SetMemoryPoolSize("Obstacle", 1024)

	SetMemoryPoolSize("PathNode", 1024)

    SetMemoryPoolSize("SoundSpaceRegion", 64)

    SetMemoryPoolSize("TreeGridStack", 1024)

	SetMemoryPoolSize("UnitAgent", 128)

	SetMemoryPoolSize("UnitController", 128)

	SetMemoryPoolSize("Weapon", weaponCnt)

    SetSpawnDelay(10.0, 0.25)

    --ReadDataFile("dc:OI2\\OI2.lvl", "OI2_conquest")

    ReadDataFile("dc:OI2\\OI2.lvl", "OI2_conquest")

    SetDenseEnvironment("false")

    --  Sound

    SetSoundEffect("ScopeDisplayZoomIn",  "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut", "binocularzoomout")

    voiceSlow = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_slow")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_slow", voiceSlow)

    AudioStreamAppendSegments("sound\\global.lvl", "global_vo_slow", voiceSlow)

    voiceQuick = OpenAudioStream("sound\\global.lvl", "rep_unit_vo_quick")

    AudioStreamAppendSegments("sound\\global.lvl", "cis_unit_vo_quick", voiceQuick)

    OpenAudioStream("sound\\global.lvl",  "cw_music")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_quick")

    -- OpenAudioStream("sound\\global.lvl",  "global_vo_slow")

    OpenAudioStream("sound\\kam.lvl",  "kam1")

    OpenAudioStream("sound\\kam.lvl",  "kam1")

    SetBleedingVoiceOver(REP, REP, "rep_off_com_report_us_overwhelmed", 1)

    SetBleedingVoiceOver(REP, CIS, "rep_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, REP, "cis_off_com_report_enemy_losing",   1)

    SetBleedingVoiceOver(CIS, CIS, "cis_off_com_report_us_overwhelmed", 1)

    SetOutOfBoundsVoiceOver(2, "cisleaving")

    SetOutOfBoundsVoiceOver(1, "repleaving")

    SetAmbientMusic(REP, 1.0, "rep_yav_amb_start",  0,1)

    SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)

    SetAmbientMusic(REP, 0.2, "rep_yav_amb_end",    2,1)

    SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start",  0,1)

    SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)

    SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end",    2,1)

    SetVictoryMusic(REP, "rep_yav_amb_victory")

    SetDefeatMusic (REP, "rep_yav_amb_defeat")

    SetVictoryMusic(CIS, "cis_yav_amb_victory")

    SetDefeatMusic (CIS, "cis_yav_amb_defeat")

    SetSoundEffect("ScopeDisplayZoomIn",      "binocularzoomin")

    SetSoundEffect("ScopeDisplayZoomOut",     "binocularzoomout")

    --SetSoundEffect("BirdScatter",             "birdsFlySeq1")

    --SetSoundEffect("WeaponUnableSelect",      "com_weap_inf_weaponchange_null")

    --SetSoundEffect("WeaponModeUnableSelect",  "com_weap_inf_modechange_null")

    SetSoundEffect("SpawnDisplayUnitChange",       "shell_select_unit")

    SetSoundEffect("SpawnDisplayUnitAccept",       "shell_menu_enter")

    SetSoundEffect("SpawnDisplaySpawnPointChange", "shell_select_change")

    SetSoundEffect("SpawnDisplaySpawnPointAccept", "shell_menu_enter")

    SetSoundEffect("SpawnDisplayBack",             "shell_menu_exit")

--OpeningSateliteShot

    AddCameraShot(0.944300, -0.033351, -0.327187, -0.011556, 66.060143, 26.971218, 110.013168);

	AddCameraShot(-0.270699, 0.001896, -0.962639, -0.006741, 55.551189, 32.150391, 15.785485);

	AddCameraShot(0.791880, -0.029101, -0.609572, -0.022401, 29.340685, 22.607992, 92.391785);

	AddCameraShot(0.751548, -0.008455, 0.659582, 0.007421, 133.107437, 18.300831, 111.651566);

	AddCameraShot(-0.395551, -0.250159, -0.746887, 0.472356, 179.099533, 16.466721, 153.497589);

end

As always, your help is much appreciated. Thank you for taking your time to help me.

Post by **guru** » Tue Sep 06, 2011 2:50 am

I dont remember what these sounds are

SetAmbientMusic(REP, 1.0, "rep_yav_amb_start", 0,1)
SetAmbientMusic(REP, 0.8, "rep_yav_amb_middle", 1,1)
SetAmbientMusic(REP, 0.2, "rep_yav_amb_end", 2,1)
SetAmbientMusic(CIS, 1.0, "cis_yav_amb_start", 0,1)
SetAmbientMusic(CIS, 0.8, "cis_yav_amb_middle", 1,1)
SetAmbientMusic(CIS, 0.2, "cis_yav_amb_end", 2,1)

DarthFannel · Post by **DarthFannel** » Tue Sep 06, 2011 3:12 am

Use Zero Editor and look for sound regions on the shipped Kamino map, I am pretty sure it is made like the blizzards in Hoth, that means you will need to compile a new sound level OR use the Kamino sound level.

yuke5 · Post by **yuke5** » Tue Sep 06, 2011 12:34 pm

DarthFannel wrote:Use Zero Editor and look for sound regions on the shipped Kamino map, I am pretty sure it is made like the blizzards in Hoth, that means you will need to compile a new sound level OR use the Kamino sound level.

Thank you! This helped a lot!

What causes the rain sound on Kamino? [Solved]

What causes the rain sound on Kamino? [Solved]

Re: What causes the rain sound on Kamino?

Re: What causes the rain sound on Kamino?

Re: What causes the rain sound on Kamino?