-= Gametoast.com =-

ok in your lua (for conquest) there is a line hold on

ok take a look


--This defines the CPs. These need to happen first
cp1 = CommandPost:New{name = "cp1"}
cp2 = CommandPost:New{name = "cp2"}


--This sets up the actual objective. This needs to happen after cp's are defined
conquest = ObjectiveConquest:New{teamATT = ATT, teamDEF = DEF,
textATT = "game.modes.con",
textDEF = "game.modes.con2",
multiplayerRules = true}

--This adds the CPs to the objective. This needs to happen after the objective is set up
conquest:AddCommandPost(cp1)
conquest:AddCommandPost(cp2)

conquest:Start()

SetUberMode(1)
EnableSPHeroRules()

end


---------------------------------------------------------------------------
-- FUNCTION: ScriptInit
-- PURPOSE: This function is only run once
-- INPUT:
-- OUTPUT:
-- NOTES: The name, 'ScriptInit' is a chosen convention, and each
-- mission script must contain a version of this function, as
-- it is called from C to start the mission.
---------------------------------------------------------------------------
function ScriptInit()

ReadDataFile("ingame.lvl")


SetMaxFlyHeight(300)
SetMaxPlayerFlyHeight (300)

SetMemoryPoolSize ("ClothData",20)
SetMemoryPoolSize ("Combo",50) -- should be ~ 2x number of jedi classes
SetMemoryPoolSize ("Combo::State",650) -- should be ~12x #Combo
SetMemoryPoolSize ("Combo::Transition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Condition",650) -- should be a bit bigger than #Combo::State
SetMemoryPoolSize ("Combo::Attack",550) -- should be ~8-12x #Combo
SetMemoryPoolSize ("Combo::DamageSample",6000) -- should be ~8-12x #Combo::Attack
SetMemoryPoolSize ("Combo::Deflect",100) -- should be ~1x #combo

ReadDataFile("sound\\yav.lvl;yav1cw")
ReadDataFile("dc:SIDE\\rep.lvl",
"rep_inf_ep3_rifleman",
"rep_inf_ep3_rocketeer",
"rep_inf_ep3_engineer",
"rep_inf_ep3_sniper",
"rep_inf_ep3_officer",
"rep_inf_ep3_jettrooper",
"rep_hover_fightertank",
"rep_hero_anakin",
"rep_hover_barcspeeder")
ReadDataFile("SIDE\\cis.lvl",
"cis_inf_rifleman",
"cis_inf_rocketeer",
"cis_inf_engineer",
"cis_inf_sniper",
"cis_inf_officer",
"cis_inf_droideka",
"cis_hero_darthmaul",
"cis_hover_aat")


ReadDataFile("SIDE\\tur.lvl",
"tur_bldg_laser",
"tur_bldg_tower")

SetupTeams{
rep = {
team = REP,
units = 64,
reinforcements = 150,
soldier = { "rep_inf_ep3_rifleman",9, 56},
assault = { "rep_inf_ep3_rocketeer",1, 4},
engineer = { "rep_inf_ep3_engineer",1, 4},
sniper = { "rep_inf_ep3_sniper",1, 4},
officer = {"rep_inf_ep3_officer",1, 4},
special = { "rep_inf_ep3_jettrooper",1, 4},

},
cis = {
team = CIS,
units = 64,
reinforcements = 150,
soldier = { "cis_inf_rifleman",9, 56},
assault = { "cis_inf_rocketeer",1, 4},
engineer = { "cis_inf_engineer",1, 4},
sniper = { "cis_inf_sniper",1, 4},
officer = {"cis_inf_officer",1, 4},
special = { "cis_inf_droideka",1, 4},
}
}

SetHeroClass(CIS, "cis_hero_darthmaul")
SetHeroClass(REP, "rep_hero_anakin")

notice the SetUberMode(1) this has to be placed as it is above, it allows more than the default amount of AI infantry on the battleground at one time

ive bolded it for you, ive also bolded the set unit amount, the first number is the minimum and the second is the maximum amount of ai infantry , i hope u understand all this

as for your music, i once heard teancum say something about never being able to get custom sounds in the game,
although im not sure

Gunjak, STOP double posting. There's an edit button for a reason. That's your first warning.

You really need to work on the texturing of the mountains. There are a lot of good textures other than yavins.

sorry tean, normally i get the feeling the messages that i edited in dont get read, i wont do it again

what happens if i do it again

On-topic: This map looks great, and i liked the mountains especially

Off-topic: Gunjak, i guess if you do it again you'll keep on getting warning till you get banned :/

Off-Topic: Yeah, you will get a 2nd Warning, then like a week ban, then a lifetime ban if I remember correctly.

True people often dont notice the edit, but its better than getting on the wrong side of the admin (your going to the ban-stick side).

It was said that you can't get custom sounds in the game - was the option to munge sounds checked? Has anyone found where ambient sounds are stored in the Sound folder?

I just retextured the cliff network: here's a few screenshots.

- http://i82.photobucket.com/albums/j252/ ... erview.jpg

- http://i82.photobucket.com/albums/j252/ ... etwork.jpg

- http://i82.photobucket.com/albums/j252/ ... Canyon.jpg

Since many of my questions have gone unmentioned, I'll see if rearranging them in terms of apparent complexity will help.

EASY
-I need to make modifications to (depower) the CIS strike bomber. To do that, will I have to copy the entire CIS side to my map, or just data on "greviousfighter"? Whatever the case, I could use complete instructions, or a link to a BFII tutorial with complete instructions detailing what I need to do.

MEDIUM
-I want to make it so that some of my omnilights will actually be visible as a glowing light in the place they are located. Can this be done? How?
-I still am having no luck with my pathing attempts. Here is TOR.pln

Hub("Overlook 1")
{
Pos(-171.517303, 0.000000, 36.196110);
Radius(4.000000);
BranchWeight("Overlook 2",20.000000,"Overlook 1-2",1);
}

Hub("Overlook 2")
{
Pos(-171.833847, 8.753185, -28.214397);
Radius(4.000000);
}

Hub("Overlook 3")
{
Pos(-139.337234, 20.117739, -27.830799);
Radius(4.000000);
}

Hub("Overlook 4")
{
Pos(-139.633789, 28.629999, 12.847847);
Radius(6.000000);
}

Hub("Overlook Entrance")
{
Pos(-165.576462, 0.000000, 103.558105);
Radius(57.651207);
}

Hub("Overlook Jetstart")
{
Pos(-110.354111, 0.078542, 14.388908);
Radius(27.616404);
BranchWeight("Overlook 4",2.500000,"Overlook Jetroute",1);
}

Connection("Overlook 1-2")
{
Start("Overlook 1");
End("Overlook 2");
Flag(1);
}

Connection("Overlook 2-3")
{
Start("Overlook 2");
End("Overlook 3");
Flag(1);
}

Connection("Overlook 3-4")
{
Start("Overlook 3");
End("Overlook 4");
Flag(1);
}

Connection("Overlook E-1")
{
Start("Overlook Entrance");
End("Overlook 1");
Flag(1);
}

Connection("Overlook Jetroute")
{
Start("Overlook Jetstart");
End("Overlook 4");
Flag(1);
JetJump();
}

Here is the error message I get when I munge:

ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
ERROR[pathplanningmunge world1\TOR.PLN]:Node [Overlook] does not exist
10 Errors 0 Warnings


HARD
-I want to use a music file named tordarian_intro as ambient music. Does anyone know a a tutorial for BFII that tells how to do this?
-I have a landscape renderer that can export elevations in PCX, DXF, and ASCII Z format. Can any of these formats replace or be converted to MSH format without having to use a 3D modeling program like XSI? (The reason I want to do this is because I could use some background terrain.)

Don't use spaces when you name stuff. I bet anything what you see as "Overlook 4" the game only sees as "Overlook". Try "Overlook_4".

Teancum wrote:Don't use spaces when you name stuff. I bet anything what you see as "Overlook 4" the game only sees as "Overlook". Try "Overlook_4".

Thanks, that worked perfectly. The effect of the paths I have up now is rather dramatic, it feels like the AI just became smarter, simply because more of them are fighting at once.

On this topic, I have a new question: is there a way to elevate hubs?

hub or hud

nice pics. Im looking foward to this map's release.

Tuskenjedi wrote:hub or hud

Hub. I'm asking if there's a way to elevate the hubs used in path planning.

Hold shift and drag.

jangoisbaddest wrote:Hold shift and drag.

That might work with paths, but it does not work with path-planning hubs. I tried. Does anyone know how to elevate path-planning hubs? As an additional question, does anyone know if you need to do something for new layers to be read for Conquest?

EDIT: Also, how do you elevate Barriers?

Well, the beta WOULD be out, but I'm encountering a problem with filefront.

Whenever I try to upload my zipped world file, the site simply says it is "connecting" and keeps refreshing the page. Nothing else happens. Eventually, the site reverts to the "this page cannot be displayed" prompt. Does anyone know what I'm doing wrong?

well you can also upload it here

http://www.rapidshare.de

http://www.yousendit.com

http://www.savefile.com

Beta is UP! :bdroid2: (I think)

http://www.savefile.com/files.php?fid=5154366 - Try this link

Major bug on my pc

the game just crashes when i try to play the map

i can play for like 5 sec then it crashes